Bus T3 - engine
Novelties
No results were found for the filter!
in stock
123 ignition with vacuum-advance
fits for : all type 1 engines (except 25/30hp) all type 4 engines 1.7-2.0 l and CT/CZ engines This ignition distributor no longer wears out, the ignition is adjusted fully electronically. By recoding accordingly, 15 different adjustment...
in stock
123 ignition without vacuum advance for carburetor engines
1-2-3 ignition distributor without vacuum connection , contactless for Type 1 engine in Beetle, Bus, Thing, Fridolin, Type 3 and Karmann Ghia, except 25 and 30 hp engines. This ignition distributor no longer wears out, the adjustment of...
in stock
123 TUNE ignition for carburetor engines
suitable for: all 1.2-1.6 engines (except 25-30 HP) T3 CT / CZ / CU and all Type 4 engines not suitable for injectors maintenance-free technology, particularly suitable for modified engines
2 E 3 carburetor, fits Bus T3 WBX (up to 07/85)
original spare part, NOS limited quantity for vehicles with DG engine & manual gearbox fits for Bus T3 (up to FIN 24-F-175 000) spare part number for comparison 025 129 015 slight traces of storage (dirt), some without cap
in stock
Abdeckplatte Benzinpumpenöffnung Typ 4 in Edelstahl
passend bei Bus und Typ 4 bei allen luftgekühlten Motoren von 1,7-2,0 Motorkennbuchstaben CJ, CU, GB usw. Wird benötigt wenn Sie Ihren Bus oder 411/412 mit einer elektrischen Benzinpumpe betreiben möchten
in stock
Actuating shaft ball stud, fits Bus T2 & T3 (08/73 to 12/82)
for dual carburettor system fits for Bus T2 (from VIN 214 2000 001) Bus T3 (engine CU) improved reproduction with long durability made of brass
in stock
Actuating shaft spring, fits various models (08/68 to 12/82)
for engines with dual carburetor system fits for Type 4 (1800cc) Bus T2 (from VIN 214 2000 001) Bus T3 (engine code CU) reproduction in original quality
in stock
in stock
Air baffle bottom, front right, galvanized, top quality, 25 kW (34 hp)
This galvanized air baffle for the pushrod protection tubes has the nuts and mounting holes in place. No rework is necessary as with the inexpensive repros.
in stock
in stock
Air Cut off valve/Engine stop valve, Diesel
Caddy 1.6D 08/89- Golf/Jetta/Vento (nicht AEY) 1.5-1.9D 08/76-09/97 LT 2.4D 01/79-01/96 Passat/Santana 1.5-1.9D 08/77-09/96 Polo 1.3-1.4D 08/86-07/94 Polo Classic (1Y) 1.9D 11/95- Seat Ibiza/Cordoba (nicht AEY) 1.9D 02/93- Seat Toledo...
in stock
Air filter insert, fits Bus T3 WBX
approx.183mm x 97mm x 102mm fits for Bus T3 WBX (except DF & EY) spare part number for comparison 025 129 620
in stock
Air filter insert, fits various models from 08/72
aprox. 213mm x 213mm x 58mm fits for Bus T2 1.7l - 2.0l (from FIN 213 2000 001) Bus T2 1.3l & 1.6l (from FIN 215 2000 001) Bus T3 LBX Bus T3 1.9l WBX (only DF & EY) Polo Mk II, Derby Mk II, Polo notchback, Polo Classic Mk I (engine GK,...
in stock
Air filter insert, fits various models with diesel engine
approx. 334mm x 134mm x 57mm fits for Golf Mk I, Jetta Mk I - turbo diesel Golf Mk I, Jetta Mk I, Caddy Mk I - naturally aspirated diesel (für dusty countries) Caddy I - diesel Golf Mk II, Jetta Mk II - all diesel Bus T3 - naturally...
in stock
Air Hose Grommet, right/oval, fits for Bus T2 1.7 - 2.0 and T25
Fits for Bus T2 and Typ 25 Made by WERK34
in stock
in stock
in stock
Air intake hose, fits Bus T3 (08/82 bis 07/85)
for WBX engines 1.9 & 2.1 fits Bus T3 (VIN 24-D-000 001 to 24-F-175 000)
in stock
in stock
in stock
Alu-Valve covers with ventilation , Evolution Type 1
German Product fits all Typ 1 engines except 24,5-30 HP
Aluminum cam gear
When purchasing a new camshaft, it is necessary to order a cam gear (pignon) with most camshafts. The original is riveted in the factory to the camshaft, which is often not the case for camshafts available on the after-market. The...
NEW
Aluminum/plastic radiator, 568 x 438 x 42 mm, “Heavy-Duty,” compatible with T25
2 mm High-Performance Radiator – Upgrade for Improved Cooling Efficiency This high-quality 42 mm radiator core is the ideal solution for vehicles with increased thermal demands or engines that tend to run hotter under normal driving...
NEW
Aluminum/Plastic Radiator, 568x438x34 mm, suitable for T3 Bus (08/82–07/92)
fit for T3 Bus Model years 08/82–07/92 For manual transmission For vehicles without air conditioning
in stock
Ansaugkanal des Luftfilters, passend für Bus T3 (Diesel)
passend für Bus T3 mit Dieselmotor (CS, JX & KY) Original-Ersatzteil, NOS Einzelstück
in stock
Auslass-Ventil, passend für Bus T3 WBX
33,9 x 9 x 122,8 mm, 3 Rillen passend für Bus T3 (Mkb DG, SR, MV, GW, SS & DJ)
Automatic choke 12V, fits Bus T2 (from 08/69)
original spare part, NOS limited quantity for Solex 34 PDSIT-2 carburettor fits for Bus T2 (engine codes CA, CE, AP, AW & CJ) Bus T3 (engine code CU - as replacement for 021 129 191 E) spare part number for comparison 021 129 191 C
in stock
Bearing piece for rocker arm shaft, fits type 1 engines & WBX
fits for Beetle, Karmann Ghia & Type 147 (from engine no. 9 205 700) Bus T1 (from engine no. 710 800) Type 3 & Type 34 (from engine no. 672 698) Type 181 Bus T2 Bus T3 (CT, CZ & WBX) original spare part, NOS limited quantity
in stock
Bearing shell for crankshaft bearing no. 2, 4th undersize, for type 1 engine (from 05/60)
not for 30hp engines except Bus T1 (from engine no. 3 400 000) 1,00mm undersize (shaft) 65,0mm Ø outer dimension (standard) original spare part, NOS few available spare part numbers for comparison: 113 105 555 D & 131 105 555 Price for...
in stock
Bearing shells for crankshaft bearing No. 2, 2nd undersize, for type 1 engines (from 05/60)
not for 30hp engines except Bus T1 (from engine no. 3 400 000) 0.50 undersize (shaft) 65.0 mm Ø outer dimension (standard) original spare part, NOS few available spare part numbers for comparison: 113 105 543 D & 131 105 543 Price for...
in stock
in stock
Big bore piston and liner kit 95,5 mm
fit for T3 2.1, Bj. 08/82-07/92 Displacement increase from 2.1 to 2.2 l
in stock
Big bore piston and liner kit 95,5 mm
suitable for T3 1.9, Bj. 08 / 82-07 / 92 Displacement increase from 1.9 to 2.0 l
Big-bore cylinder and piston kit 1641cc slip-in
Big-bore cylinder and piston kit 1641cc slip-in fits for: Beetle Type 3 CT/CZ engines Specifications: Bore: 87 mm Stroke: 69 mm Case Ø: 90 mm Cylinder head Ø: 94 mm Piston pin Ø: 22 mm
Big-bore cylinder and piston kit 1915 cc
Big-bore cylinder and piston kit 1915 cc fits for: Beetle Type 3 CT/CZ engines Specifications: Bore: 94 mm Stroke: 69 mm Casing Ø: 97 mm Cylinder head Ø: 101 mm Piston pin Ø: 22 mm
in stock
Bolt, valve cover gasket , 1.5-1.8
suitable for Bus T3 1.6-1.7 1/81- 7/92 (Diesel und T-Diesel) Golf I 1.5-1.8 8/76- 8/83 Golf I Cabrio 1.5-1.8 1/79- 7/92 Golf Caddy 1.6-1.8 12/82- 7/92 Golf II 1.6-1.8 8/83- 7/92 Jetta I 1.5-1.8 8/79-12/83 Jetta ÍI 1.6-1.8 12/83- 7/92 8...
Bracket engine carrier, suitable for T3
Bracket engine carrier suitable for T3 (05/79 - 07/92) T3 Syncro (02/85 - 07/92)
in stock
in stock
Breather valve
fits for: Water boxer engines 1900cc engines 1983 (24 D 089 699) until 07/85 (except automatic transmissions)
in stock
in stock
in stock
Cam Shaft Drive Gear 25-37 kW (34-50 PS) + WBX
Fits: Type 1 (except 25 and 30 hp) Type 3 CT Water boxer engines
NEW
Camshaft bearing set, fits Type 4 engines (08/68 to 12/82)
manufacturer: Mahle for standard camshafts fits Type 4 Bus T2 (1700 cc and up) Bus T3 (2000 cc) spare part number for comparison: 021 198 541
NEW
Camshaft bearing set, fits various models (08/65 to 12/88)
outer Ø 27.50 mm (standard size) standard camshaft (25.00 mm) fits Beetle (VIN 116 000 001 to 11-J-004 300) Karmann Ghia (from VIN 146 000 001) Type 147 (from VIN 146 000 001) T1 Bus (from VIN 216 000 001) T2 Bus (1300 and 1600 cc) T3...
Viewed