Bus T3 - electrical
Novelties
No results were found for the filter!
in stock
"Black Magic"-Headlights , blackchrome
fits for Golf MK1 Golf MK1 Cabrio Caddy MK1 Beetle from construction year 1974 Bus T2 Bus T3 2-parts E-marked
in stock
"Black Magic"-Headlights,with cross, blackchrome
fits for Golf MK1 Golf MK1 Cabrio Caddy MK1 Beetle from construction year 1974 Bus T2 Bus T3 2-piece kit E-marked
in stock
12 times fusebox, Beetle & T3
fits for: Beetle and Karmann Ghia from 1973 Bus T3 up to 1985 original spare part only few left NOS slightly storage traces (dirt)
in stock
123 ignition with vacuum-advance
fits for : all type 1 engines (except 25/30hp) all type 4 engines 1.7-2.0 l and CT/CZ engines This ignition distributor no longer wears out, the ignition is adjusted fully electronically. By recoding accordingly, 15 different adjustment...
in stock
123 ignition without vacuum advance for carburetor engines
1-2-3 ignition distributor without vacuum connection , contactless for Type 1 engine in Beetle, Bus, Thing, Fridolin, Type 3 and Karmann Ghia, except 25 and 30 hp engines. This ignition distributor no longer wears out, the adjustment of...
in stock
123 TUNE ignition for carburetor engines
suitable for: all 1.2-1.6 engines (except 25-30 HP) T3 CT / CZ / CU and all Type 4 engines not suitable for injectors maintenance-free technology, particularly suitable for modified engines
in stock
4.) Knopf für Frischluftregulierung, passend für Modelle ab 08/67 mit ungepolsterten Armaturenbrett
passend für Käfer (ab FIN 118 000 001) Typ 3 (ab FIN 311 2000 001) Typ 3 (ab FIN 318 000 001 als Ersatz für 113 819 661 C) auch für Handschuhfach Käfer (ab FIN 118 000 001) Bus T2 (ab FIN 218 000 001) Typ 3 (ab FIN 318 000 001 als Ersatz...
in stock
52mm Tachometer gauge
Tachometer with classic look. Fits into any 52mm opening. Black dial with lighting. 12V Fits for 4 cylinders, but can also be switched to 6 or 8. Incl. Installation instructions.
in stock
95mm Dynamo/Alternator Top Pulley “C” Spanner
This “C” Spanner has been made to fit top pulleys with a diameter of 95mm, hooks into the notch on the rear of the pulley and holds it firm while the nut is undone or tightened up.
in stock
99mm Dynamo/Alternator Top Pulley “C” Spanner
This “C” Spanner has been made to fit top pulleys with a diameter of 99mm, hooks into the notch on the rear of the pulley and holds it firm while the nut is undone or tightened up.
in stock
Abdeckkappe für Hella 118 Fernscheinwerfer und Nebelscheinwerfer, schwarz, mit Hella Logo
Abdeckkappe für Hella 118 Fernscheinwerfer und Nebelscheinwerfer schwarz mit Hella Logo passend für: Karmann Ghia, 1.2-1.6, 08/55-07/74 Kübelwagen 181, 1.5-1.6, 09/69-02/79 Käfer, 1.2-1.6, 12/47-12/86 Bus T1, 1.2-1.5, 01/50-07/67 Bus T2,...
in stock
Accessory for gauges in DIN radio bay
Metal black Fastening by clips Fits for up to 3 gauges with a diameter of 52mm
Additional light with switch, olive green, fits various models
manufacturer HELLA OEM, NOS mounting via knurled nut long power cable with plug
in stock
in stock
in stock
in stock
Alarm pull rotary switch, fits various models (08/69 to 2004)
for vehicles with police equipment fits for Bus T2 to T4 (from VIN 219 300 000) Type 181 Golf MK1 to Golf MK2 Scirocco MK1 to MK2 Jetta MK1 to MK2 Vento Passat MK1 LT MK1 Original spare part, NOS part number for comparison 211 951 275 A
in stock
Alternator for CU engines, general overhaul in exchange, old part delivery upon receipt of the product
The old deposit of 80.00 EUR is included in the purchase price and will be refunded upon exchangeable old part.
in stock
Alternator key with 21mm and 36mm wrench size
36mm at one end and 21mm at the other end (21mm is for the later alternator nuts) Fan pulley wrench, much smaller and lighter than a full size 36mm wrench. This key is made of robust tool steel and galvanized.
in stock
Alternator, 90 Amp, fits for Bus T3 Diesel from 01/85 + Bus T4
Alternator New part without exchange Corresponds to OE No. 068 903 017 Q fits for: Bus T3, 1.6 Diesel + 1.6 Turbodiesel, from model year 1985 onwards Bus T4 Engine 1 X / AAF / AAB
in stock
Alternator/Generator, 90 Amp, fits for Golf + Bus
Alternator/Generator 90 Amp fits for: Golf/Jetta, 1.6, 01/85-12/92 Golf/Jetta, 1.6TD, 04/89-11/90 Golf/Jetta, 1.8 (GU/HV/GX/RH), 08/84-10/91 Golf/Jetta Cat., 1.8, 08/87-10/91 Golf/Jetta GTI, 1.8 (RD), 08/85-08/86 Golf/Jetta GTI, 1.8...
in stock
in stock
in stock
Ball bearing for dynamo, fits various types
fits for armature of all DC alternators two pieces required per dynamo
Ball bearings for alternator, fit for various types
passend für Anker aller Gleichstrom-Lichtmaschinen zwei Stück pro Lichtmaschine erforderlich
in stock
in stock
in stock
Battery Clamp For Fixed Cab Seats, passend für Bus T3
Battery Clamp For Fixed Cab Seats passend für: Bus T3, 1980-1992 Vanagon, 1980-1992
in stock
in stock
in stock
Battery Cover 240 x 170 mm
Please compare the measurements with your battery. 240 x 170 mm Made by WERK34
in stock
in stock
Bearing for generator, fits for Bus T3
Bearing for generator fits for: Bus T3, 1.9, 08/82-07/92 Bus T3, 2.1, 08/85-07/92
in stock
Blower switch, 4-stage, fits various models (08/76 to 12/95)
Stage 0 - 3, four contact pins for vehicles without air conditioning fits for Golf Mk1 (from VIN 177 2000 001) Jetta Mk1 Golf Mk1 Convertible Golf Mk2 / Jetta Mk2 Scirocco Mk1 & Mk2 Caddy Mk1 LT 1st generation (from VIN 28 A 000 001)...
in stock
Blower switch, universal, fits various models (08/76 to 12/95)
stage 0 - 4, 5 contact pins for vehicles with air condition as well fits for Golf Mk1 (from VIN 177 2000 001) Jetta Mk1 Golf Mk1 convertible Golf Mk2 / Jetta Mk2 Scirocco Mk1 & Mk2 (from VIN 537 2000 001) Caddy Mk1 LT 1st generation...
in stock
in stock
in stock
in stock
in stock
in stock
in stock
in stock
Cable connector, 4-pin, fits for different vehicles
Cable connector for wide blade receptacles 6.3mm fits for: Beetle Karmann Bus Golf Porsche and many more vehicles
in stock
Cable tie for harness with fixing
Cable tie color: black length: 110 mm width: 10 mm bolt diameter: 5 mm diameter receptacle: 23 mmTemperature range from: -40 °C Temperature range up to: +85 °C Material: polyamide 6.6 Mounting type: with weld stud mount Shape: grid...
Viewed