181 Thing
Novelties
No results were found for the filter!
in stock
Caster Shims
Caster Shims ist der häufig genannte Begriff für diese Nachlaufschalen passend für Kugelgelenk- und Bundbolzenachse Wenn Sie Ihr Fahrzeug tiefergelegt haben kann mit den Nachlaufschalen der Geradeauslauf wieder hergestellt werden. dazu...
Rubber-metal bearing, rear left, good reproduction, fits from year 08/72 onwards
- This rubber bearing is clearly different from the cheap reproductions ! - The studs have the correct length and all holes are in the right place. - The metal carrier is additionally galvanized against corrosion. - Cheap reproductions...
in stock
"BABY-MOON" Hub Cap, without badge, all 4-hole rims from 08/67
passend für: alle 4 Loch Felgen (ab Bj. 08/67) Bus T2/ T3 LK5x112 (ab Bj. 08/70)
in stock
"BABY-MOON"-Hub Cap, without badge, fit for all 5-hole-rims
fit for Käfer Karmann Ghia Typ 3 Bus T1 Bus T2 A Kübel (only 5-Hole) Porsche 356 A and Porsche B
in stock
in stock
108mm Dynamo/Alternator Top Pulley “C” Spanner
This “C” Spanner has been made to fit top pulleys with a diameter of 108mm , hooks into the notch on the rear of the pulley and holds it firm while the nut is undone or tightened up .
in stock
in stock
123 ignition with vacuum-advance
Intended for standard ex-factory engines which always feature a vacuum for acceleration. Many replaced their standard power Distributor by a Distributor without vacuum advance, a wrong decision. The ignition timing is withdrawn than...
in stock
123 ignition without vacuum-advance
Intended for tuned engines with larger carburetor drive which in most cases no vacuum for advance capabilities. Because the way of carburetor to cylinder head is a lot shorter than with a standard engine has practically no pull this...
123 TUNE ignition for carburetor engines
suitable for: all 1.2-1.6 engines (except 25-30 HP) T3 CT / CZ / CU and all Type 4 engines not suitable for injectors maintenance-free technology, particularly suitable for modified engines
12V flasher and hazard warning relay, 4 x 21W, fits from 08/68
manufacturer BOSCH fits for Beetle (VIN 119 000 001 to 111 2799 842) Karmann Ghia, type 14 (VIN 149 000 001 to 141 3200 000) Type 181 Type 3 (VIN 319 000 001 to 310 2500 000) Karmann Ghia, type 34 (from VIN 349 000 001) Type 4 (until VIN...
in stock
12V flasher and hazard warning relay, 4 x 21W, fits from 08/68
manufacturer STRIEBEL fits for Beetle (VIN 119 000 001 to 111 2799 842) Karmann Ghia, type 14 (VIN 149 000 001 to 141 3200 000) Type 181 Type 3 (VIN 319 000 001 to 310 2500 000) Karmann Ghia, type 34 (from VIN 349 000 001) Type 4 (until...
in stock
12V flasher and hazard warning relay, 4 x 21W, fits various models
fits for Beetle (VIN 119 000 001 to 111 2799 842) Karmann Ghia, type 14 (VIN 149 000 001 to 141 3200 000) Type 181 Type 3 (VIN 319 000 001 to 310 2500 000) Karmann Ghia, type 34 (from VIN 349 000 001) Type 4 (until VIN 410 2100 000) K70...
in stock
12V flasher and hazard warning relay, 4 x 21W, fits various models
fits for Beetle (VIN 119 000 001 to 111 2799 842) Karmann Ghia, type 14 (VIN 149 000 001 to 141 3200 000) Type 181 Type 3 (VIN 319 000 001 to 310 2500 000) Karmann Ghia, type 34 (from VIN 349 000 001) Type 4 (until VIN 410 2100 000) K70...
12V flasher and hazard warning relay, 4 x 21W, used
manufacturer BOSCH fits for Beetle (VIN 118 381 367 bis 118 3200 000) Karmann Ghia, type 14 (VIN 148 381 367 bis 148 999 000) Type 181 (bis VIN 180 2151 344) Type 3 (VIN 318 103 362 bis 318 500 000) Karmann Ghia, type 34 (VIN 348 103 326...
in stock
13.) Radlagersatz ( pro Rad ) mit Dichtring, passend ab 02/68
passend für: Käfer (ab Bj. 04/68) Karmann Ghia (ab Bj. 04/68) Typ3 (ab Bj. 02/68) 411/412
in stock
1st gear- drive pinion
Original part number: 113 311 251 A Beetle (Fg No. 3 192 507 to 116 114 582) Karmann Ghia (Fg No. 3 192 507 to 146 114 582) Bus (Fg No. 469 506 to 216 023 527)
in stock
in stock
1st gear, drive pinion
Original part number: 113 311 251 B Gear 1st gear on pinion Full synchromesh Beetle (Fg.Nr.116 114 583-113 2297 983) Beetle (No. 111 2000 001-133 2297 983) Karmann Ghia (No. 146 114 583-143 2000 001) Bucket 181 (No. 180 2151 344-183 2346...
in stock
in stock
2nd gear- drive pinion
Original part number: 113 311 261 Beetle to (Fg No. 116 114 582) Karmann Ghia to (Fg No. 116 114 582) Type 3 to (Fg No. 316 035 545) Bus T1 to (Fg No. 216 023 527)
in stock
2nd gear- drive pinion
Originalpartnumber: 113 311 261 A Beetles from 1966 Karmann Ghia from 1966 Type 3 from 1965 Bus until 1975
in stock
2nd gear- drive pinion
Originalpartnumber: 113 309 261 A Beetles from (Fg No. 397 023 to 3 192 506) Karmann Ghia from (Fg No. 397 023 to 3 192 506) Bus T1 from (Fg No. 20-047 102 to 469 505)
in stock
36mm and 21mm Dynamo Pulley Nut Spanner
36mm an einem Ende und 21mm am anderen Ende (21mm ist für die späteren Lichtmaschinen Muttern) Lüfterriemenscheibenschlüssel, viel kleiner und leichter als ein 36-mm-Schlüssels in voller Größe. Dieser Schlüssel ist aus einem robusten...
in stock
3rd and 4th gear synchro-hub
Originalpartnumber: 113 311 309 Snap ring, shifting plate Part synchromesh Beetle (Fg.Nr.397 023 -3 192 506) Karmann Ghia (No. 929 746-3 192 506) Bus (No. 047 102-469 505)
3th gear train
Originalpartnumber: 111 307 275 Beetle to (Fg No. 115 247 528) Karmann Ghia to (Fg No. 115 247 528) Bus T1 to (Fg No. 20-047 101)
in stock
3th gear train
Original part number: 113 309 275 A Beetle from (Fg.Nr.397 023 to 3 192 506) Karmann Ghia from (No. 929 746 to 3 192 506) Bus from (number 047 102 to 469 505)
in stock
in stock
in stock
in stock
4 pcs. Set of clamps for intake manifold gaskets (129 111 701 B)
passend für 1,6l (MKB AD, AE, AF, AH, AL, CT & CZ) 47mm & 40mm
in stock
4-piece set of whitewall rings, 15 inch
4-teiliger Satz Weißwandringe 15 Zoll Kauf und Montagehinweise für Weißwandringe: beim Reifenwechel sind die Weißwandringe (WWR) zwischen Reifen und Felgenhorn so einzulegen, dass sie gleichmäßig an der Reifenflanke anliegen. !ACHTUNG:...
4-teiliger Satz Radzierringe aus Aluminium, Lochdesign ab Bj. 08/72
passend für 4-Lochfelge passend für Käfer, Karmann Ghia und Typ3 mit Radkappenfelgen (ab Bj. 08/72) Maße: 15 Zoll
in stock
4th gear train
Original part number: 113 309 341 A Gear wheel pair 4th gear on Triebling Part synchromesh Beetle (Fg.Nr.397 023 -3 192 506) Karmann Ghia (No. 929 746-3 192 506) Bus (No. 047 102-469 505)
4th gear train
Original part number: 113 311 341 B Beetles from (Fg No. 118 258 723 to 112 3200 000) Karmann Ghia from (Fg No. 118 258 723 to 112 3200 000) Type 3 from (Fg No. 318 064 186)
in stock
6 Volt alternator, 90 mm diameter, overhaul in exchange, old part delivery after receipt of the product
Please indicate to us when placing your order, if you need an alternator with tapped holes for mounting the controller!
69 mm Counter-weighted crankshaft, 4140 Chromoly
69 mm Counter-weighted crankshaft 4140 Chromoly fits for 181 Thing 09/69-02/79, 1.5-1.6 Karmann Ghia 08/66-12/76, 1.3-1.6 Bus T1 08/63-07/67, 1.5 Bus T2 08/67-07/71, 1.6 Type1 incl. 1302/1303 08/65-03/81, 1.3-1.6 Type3 08/65-07/73, 1.5-1.6
in stock
95mm Dynamo/Alternator Top Pulley “C” Spanner
This “C” Spanner has been made to fit top pulleys with a diameter of 95mm , hooks into the notch on the rear of the pulley and holds it firm while the nut is undone or tightened up .
in stock
99mm Dynamo/Alternator Top Pulley “C” Spanner
This “C” Spanner has been made to fit top pulleys with a diameter of 99mm , hooks into the notch on the rear of the pulley and holds it firm while the nut is undone or tightened up .
in stock
in stock
AC motor with 3 connector, for external control, overhaul in exchange, old part delivery after receipt of the product
The old deposit of 50.00 EUR is included in the purchase price and will be refunded upon exchangeable old part.
in stock
Accelerator pedal lever, fits various types (LHD from 10/64)
fits for Type 3 (from VIN 315 048 102) Karmann Ghia, Type 34 (from VIN 345 048 102) Type 1 (from VIN 116 460 614) Karmann Ghia, type 14 (from VIN 146 460 614) Type 181
in stock
Adapter bar for battery, fits for 181 Thing, NOS
Adapter bar for battery fits for 181 Thing NOS original part number only for comparsion 000 915 413
Adjustable spring plates (Per Pair) 553 mm
This adjustable torsion bar Swords enable raising or lowering by 40mm by simply adjusting the adjusting screw which is accessible even with mounted wheel. A must for drag racing cars to make fine adjustments on the circuit can, however,...
in stock
Adjustable spring plates (Per Pair) 553 mm
This adjustable torsion bar Swords enable raising or lowering by 40mm by simply adjusting the adjusting screw which is accessible even with mounted wheel. A must for drag racing cars to make fine adjustments on the circuit can, however,...
Viewed