Typ 3 1500 | 1600 - engine
Novelties
No results were found for the filter!
Clutch Set 200 mm 08/62-07/70
Kupplungsset bestehend aus : 1 x Druckplatte 1 x Mitnehmerscheibe 1 x Ausrücklager Die Angaben bei Kuplungen beziehen sich auf den Durchmesser der Kupplungsscheibe bzw. der Druckplatte in mm. Im Zweifelsfall vor der Bestellung die alte...
Clutch Set 200 mm 08/70-02/76
Kupplungsset bestehend aus : 1 x Druckplatte 1 x Mitnehmerscheibe 1 x Ausrücklager Die Angaben bei Kuplungen beziehen sich auf den Durchmesser der Kupplungsscheibe bzw. der Druckplatte in mm. Im Zweifelsfall vor der Bestellung die alte...
Clutchkit, 180 mm, fit for models up to 07/70, original LUK
Kupplungsset bestehend aus : 1 x Druckplatte 1 x Mitnehmerscheibe 1 x Ausrücklager Die Angaben bei Kuplungen beziehen sich auf den Durchmesser der Kupplungsscheibe bzw. der Druckplatte in mm. Im Zweifelsfall vor der Bestellung die alte...
in stock
Cold start valve for injection, fits Type 3 (from 08/69)
suitable for Type 3 (from engine no. U 0 231 101, U 5 000 001 & X 0 000 001) original spare part, NOS only few left
in stock
Cold start valve for injection, fits Type 3 (up to 07/69)
fits for Type 3 (engine no. U 0 000 001 to U 0 231 100) original spare part, NOS ingle item
in stock
Compensation line for double carburettor, suitable for type 3/34, NOS
NOS original part suitable for the following engines: Code Letter T 0 805013 1.6 39.71 kw (54hp) Code Letter P 0 006 080 1.6 39.71 kw (54hp) original part number serves only for comparsion 311 129 743 available in limited quantities
Compensation line for double carburettor, suitable for type 3/34, NOS
NOS original part suitable for the following engines: Code letter T to engine number T 0 244 543 1.6 39.71 kw (54hp) Code letter P to engine number P 0 001 299 1.6 39.71 kw (54hp) original part number serves only for comparsion 341 129...
in stock
Connecting bearing set, 0,25 mm
Connecting bearing set 0,25 mm black suitable for Bus T1 08/60-07/67, 1.2-1.5 Bus T2 08/67-07/79, 1.6-2.0 Bus T3 05/79-07/92, 1.6-2.1 Type 1 08/60-12/85, 1.2-1.6 (25-37 kW) Type 3 04/61-07/73, 1.5-1.6
Connecting hose 31 x 4 x 45, fit for type 3/34
fits for: Type 3/34 (engine code U & X) between intake pipe and inlet manifold Originalsparepart, NOS only few available
in stock
Connecting piece for air filter, Type 3/34 from 08/67
fits for: Type 3 & Type 34 with injection system (from 318 000 001) Originalsparepart single item
in stock
Connecting rod bearing set, standard
Connecting rod bearing set standard fit for Bus T1 08/60-07/67, 1.2-1.5 Bus T2 08/67-07/79, 1.6-2.0 Bus T3 05/79-07/92 Type 1 08/60-12/85, 1.2-1.6 (25-37kW) Type 3 04/61-07/73, 1.5-1.6
in stock
Connecting rod bearing shell, 2nd undersize, fits engines from 05/60 onwards
+0,50mm not for 30hp engines except Bus T1 (from engine no. 3 400 000) fits for Type 1 engines from 34hp Type 3 engines CT & CZ engines WBX engines original spare part, NOS few available Spare part number for comparison: 113 105 713
in stock
Connecting rod screw, fit for various models (until 07/65)
fit for: Type 1/14 (25, 30 & 34 PS, 37 PS to E 0 003 599, 40 PS to F 0 451 421) Type 147 Type 3/34 (up to engine no. 1 100 000) Bus T1 (up to engine no. 1 100 000) original spare part, NOS limited quantity
NEW
in stock
Connecting rod screw, fits for various models
fits for 37, 40, 44, 46, 47, 48, 50 hp engine Original spare part, NOS
Contact base plate for ignition distributor, fits Type 3/34
fits for Type 3 Type 34 original spare part, NOS only few available spare part numbers for comparison 311 905 227 C BOSCH 1 237 110 064
in stock
Control box for carburetor preheating, fits for all models, NOS
fits for: Karmann Ghia Type 34 Type 3 1500 NOS
in stock
Control box for carburettor preheating, used, suitable for type 3 1600
fits for: Type 3 1600 up to engine no. T 0 893 489 / P 0 006 526 original spare part, used only few available
in stock
Cooling air regulating flap left, fit for type 3/34 (from 08/63)
fits for: Type 3/34 (from engine no. 255 340) Originalsparepart, NOS only few available
in stock
Cooling air regulating flap right, fit for type 3/34 (from 08/63)
fits for: Type 3/34 (from engine no. 255 340) Originalsparepart, NOS only few available
in stock
Cover cap for belt pulley, fits Type 3/34
fits for: Type 3 Type 34 original spare part only few available
in stock
Cover with integrated draining plug, for 22/39 kW (30/54PS) engines
with oil drain plug and gasket set fits for all type 1 engines from 34HP onwards Bus T1 (from 30HP, engine no. 3 999 999)
in stock
Cover with integrated draining screw 25/34kW (34-50 PS)
passend für alle 25 bis 37kW (34 bis 50 PS) Motoren
Crank Shaft, Serial, fit for 1300-1600 Typ1 Engines
fit for all 1.3 - 1.6 Typ 1 Engines for example Käfer, Bus, Typ3 etc. New Part (Kein Austausch) 69mm Hub Über Kreuz gebohrt
in stock
Crankcase vent, used, type 3 & type 34
fits for: Type 3 Type 34 used original spare part single item
in stock
Crankshaft bearing no. 1, standard size, fits type 1 engines (from 05/60)
standard dimension 65,0 mm Ø outer dimension original spare part, NOS with storage traces few available
in stock
Crankshaft bearing no. 3, 1st undersize, fits type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 0.25mm undersize (shaft) 65.0mm Ø outer dimension original spare part, NOS few available
in stock
Crankshaft bearing no. 3, 2nd undersize, fits type 1 engines (from 04/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 0.50mm undersize (shaft) 65.0mm Ø outer dimension original spare part, NOS few available
in stock
Crankshaft bearing No. 3, 4th undersize, for type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 1.00 undersize (shaft) 65.0 mm Ø outer dimension (standard) original spare part, NOS few available
in stock
Crankshaft bearing no. 4, 1st undersize, for type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 0.25mm undersize (shaft) 50.0mm Ø outer dimension (standard size) original spare part, NOS not all in original box, not selectable few available
in stock
Crankshaft bearing no. 4, standard size, for type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) standard dimension (shaft) 50.5mm Ø outer dimension (1st housing oversize) original spare part, NOS not all in original box, not selectable few available
in stock
Cup disc for oil vent, fit for type 3/34 (from 08/63)
fits for: two-carburetor engines Type 3 (from engine no. 255 340) Type 34 (from engine no. 255 340) Originalsparepart
in stock
Cushion grip clutch disc, 200 mm
Due to the special lining mixture of organic material and sintered material which is located on both surface sides, a soft but not skidding engagement of the clutch is made possible.
in stock
Cylinder and piston set diameter 1679ccm / 1600 slip-in
Bore: 88 mm Stroke: 69 mm Case Ø: 90 mm Cylinder head Ø: 94 mm Piston pin Ø: 22 mm If you want more power from your engine, there are many options. You can increase the engine power without changing the displacement by changing the...
in stock
Cylinder head nuts M10 (16 pieces), fit from 08/55
fit for Type 3 engines Type 4 engines Type 1 engines (from engine no. 1 120 615)
in stock
Cylinder head unequipped, used, fits Type 3 (1500 single port to 07/62)
fits for Type 3 1500 single-port (up to engine number 65 745, 08/62) original spare part, used, traces of storage, corosion (no broken ribs) unequipped (was always delivered unequipped and completed in the workshop) fits intake manifold...
in stock
Cylinder head, unequipped, fits Type 3 1500 S (08/63 to 07/65)
fits for Type 3 1500 S engine no. 255 340 to 1 100 000 with or without code letter R original spare part, NOS unequipped Inlet approx. 30mm Ø, beveled for 1500 S intake manifolds few available required inlet valves 35 mm Ø required...
in stock
Cylinder head, used, fits Type 3 1500 S (08/63 to 07/65)
fits for Type 3 1500 S engine no. 255 340 to 1 100 000 with or without code letter R original spare part, used inlet valve 35 mm Ø exhaust valves missing 1 stud bolt for rocker arm shaft missing inlet approx. 30mm Ø, beveled for 1500 S...
Cylinder head, without valves, fits 1500/1600 Type 1 & Type 3 single port engines
Cylinder head fits 1500/1600 Type 1 Type 3 single port engines without valves
Viewed