Typ 3 1500 | 1600 - front axle

Bundbolzenvorderachse
Novelties
Close filters
  •  
  •  
from to
1 From 2
No results were found for the filter!
in stock
Radlagersatz, vorne, ab 68, pro Rad, mit Simmerring und Fett
13.) Radlagersatz ( pro Rad ) mit Dichtring, passend ab 02/68
passend für: Käfer (ab Bj. 04/68) Karmann Ghia (ab Bj. 04/68) Typ3 (ab Bj. 02/68) 411/412
Order number: 498 311 071 B
€15.85 *
Prices incl. 19% VAT plus shipping costs
in stock
2.) Anschlaggummi unten für Traghebel
Order number: 401 311 273 A
€29.90 *
Prices incl. 19% VAT plus shipping costs
2.) Dichtring für Traghebel unten
2.) Seal ring for lower torsion arm, fits Type 3/34 (11/62 to 07/64)
Bitte wählen Sie oben den Dichtring passend für Ihr Fahrzeug aus.
Order number: 405 311 179 A
€18.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Gummilager oben für Achsbefestigung Typ3 /34
Order number: 705 311 261 A
€53.48 *
Prices incl. 19% VAT plus shipping costs
in stock
311401319C-1.jpg
Axial ring for support lever top, 44.35 mm Ø, fits Type 3 & 34 (up to 07/64
fits for Type 3 (until VIN 483 592) original spare part, NOS few available diameter 44,35 mm Ø
Order number: 401 311 319 C
€23.50 *
Prices incl. 19% VAT plus shipping costs
in stock
6.) Traggelenk unten
Order number: 405 311 371 C
€39.90 *
Prices incl. 19% VAT plus shipping costs
in stock
401311303A-1.png
Bearing bush (oversize) for lower support arm, fits Type 3/34 (till 12/62)
diameter 47.2mm fits for Type 3 (up to VIN 127 587) Type 34 (up to VIN 127 587) original spare part, NOS limited quantity
Order number: 401 311 303 A
€27.90 *
Prices incl. 19% VAT plus shipping costs
in stock
401311303-1.png
Bearing bush for lower support arm, fits Type 3/34 (till 12/62)
diameter 47mm fits for Type 3 (up to VIN 127 587) Type 34 (up to VIN 127 587) original spare part, NOS limited quantity not every item in original box, no selection possible
Order number: 401 311 303
€27.90 *
Prices incl. 19% VAT plus shipping costs
in stock
405311375A-1.png
Cuff for lower ball joint, fits Type 3/34 (from 03/63)
fits for ball joint 311 405 371 A (used up to VIN 167 880 as well in case of repair) & 311 405 371 C not for ball joint 311 405 371, factory fitted up to VIN 167 880 fits for Type 3 (from VIN 167 881) Type 34 from VIN 167 881) original...
Order number: 405 311 375 A
€14.90 *
Prices incl. 19% VAT plus shipping costs
in stock
405311375-1.png
Cuff for lower ball joint, fits Type 3/34 (till 03/63)
fits for Type 3 (up to VIN 167 880) Type 34 (up to VIN 167 880) original spare part, NOS limited quantity
Order number: 405 311 375
€13.90 *
Prices incl. 19% VAT plus shipping costs
in stock
405311377-1.png
Cuff for upper ball joint, fits Type 3/34 (till 03/63)
fits for Type 3 (up to VIN 167 880) Type 34 (up to VIN 167 880) original spare part, NOS limited quantity
Order number: 405 311 377
€13.90 *
Prices incl. 19% VAT plus shipping costs
in stock
Druckgummisatz Vorderachse Typ3/34
Order number: 498 311 115/7
€53.48 *
Prices incl. 19% VAT plus shipping costs
in stock
Paar Trommelbremsachsschenkel, passend für Modelle bis 07/65 neu original/NOS
Order number: 405 311 311 E
€85.41 *
Prices incl. 19% VAT plus shipping costs
Dämpfungskörper Satz Vorderachse oben und unten 4-teilig
Front beam rubber collar kit
New Type 3 front beam rubber collar kit. Kit includes (2) upper and (2) lower collars fits all years
Order number: 705 311 261 B
€147.80 *
Prices incl. 19% VAT plus shipping costs
in stock
Schmiernippel "M10" für Vorderachskörper und Bundbolzenachsschenkel Grösse M10
Order number: 401 113 099
€1.05 *
Prices incl. 19% VAT plus shipping costs
in stock
Schraube für Trag- und Führungsgelenk, passend für Typ 3, NOS
Order number: 405 311 321
€4.95 *
Prices incl. 19% VAT plus shipping costs
405311625B-1.png
Inner front wheel bearing, fits various models (from 05/68)
manufacturer SKF or TIMKEN fits for Beetle (from VIN 118 857 240) Karmann Ghia (from VIN 148 857 240) Type 147 (from VIN 148 857 240) Type 3 (from VIN 318 189 213) Type 34 (from VIN 348 189 213) Typ 4 Type 181 original spare part, NOS...
Order number: 405 311 625 B
€24.00 *
Prices incl. 19% VAT plus shipping costs
in stock
405311625N-1.png
Inner front wheel bearing, fits various models (from 05/68)
fits for Beetle (from VIN 118 857 240) Karmann Ghia (from VIN 148 857 240) Type 147 (from VIN 148 857 240) Type 3 (from VIN 318 189 213) Type 34 (from VIN 348 189 213) Type 4 Type 181 budget friendly reproduction Spare part numbers for...
Order number: 405 311 625 N
€9.90 *
Prices incl. 19% VAT plus shipping costs
in stock
405311625-1.png
Inner front wheel bearing, fits various models (till 05/68)
manufacturer SKF fits for Beetle (VIN 116 000 001 to 118 857 239) Karmann Ghia (VIN 146 000 001 to 148 857 239) Typ 147 (VIN 146 000 001 to 148 857 239) Type 3 (up to VIN 318 189 212) Type 34 (up to VIN 348 189 212) original spare part,...
Order number: 405 311 625
€24.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Sicherungsblech für Radlager, Typ 3
Order number: 405 311 681
€1.40 *
Prices incl. 19% VAT plus shipping costs
in stock
411311161-1.JPG
Locking plate for stabilizer, fits Type 3 & Type 34
fits for Type 3 Type 34 original spare part, NOS few available
Order number: 411 311 161
€5.50 *
Prices incl. 19% VAT plus shipping costs
in stock
401311205A-1.jpg
Locking plate for torsion arm, fits Type 3 & Type 34 (11/62 to 07/65)
for torsion arms 311 405 151 C / 311 405 152 C fits for Type 3 (VIN 127 589 to 315 206 671) Type 34 (VIN 127 589 to 345 206 671) fits both sides original spare part, NOS limited quantity not suitable for front axles with welded-on...
Order number: 401 311 205 A
€8.95 *
Prices incl. 19% VAT plus shipping costs
Lagerbuchse, unten, bis 11/62, passend für Typ 3
Lower bushing, up to 11/62
Diameter: 47,2 mm
Order number: 405 311 303
€40.17 *
Prices incl. 19% VAT plus shipping costs
in stock
Dämpfungskörper Voderachse, unten, passend für Typ 3/34 (bis 04/67) NOS
Lower pad for the axle beam, suitable for Type 3/34 (up to 04/67) NOS
Bitte wählen Sie oben den Dämpfungsring passend für das Baujahr Ihres Modells aus.
Order number: 705 311 263
€53.48 *
Prices incl. 19% VAT plus shipping costs
in stock
Dämpfungskörper Voderachse, unten rechts, passend für Typ 3
Lower right pad for the Axle beam, suitable for Type 3/34 (from 04/67) NOS
original spare part, NOS suitable for Type 3 (from VIN 317 181 002) Type 34 (from VIN 347 181 002) Original part number serves only for comparsion: 311 705 264
Order number: 705 311 264
€53.48 *
Prices incl. 19% VAT plus shipping costs
Metallbuchse für Traghebel unten, passend ab 08/64
Order number: 401 311 335 A
€31.65 *
Prices incl. 19% VAT plus shipping costs
in stock
405311692-1.JPG
Nabendeckel rechts, passend für Typ 3 (bis 07/65)
passend für Typ 3 (bis FIN 315 220 883) original-Ersatzteil,NOS letztes Exemplar
Order number: 405 311 692
€39.95 *
Prices incl. 19% VAT plus shipping costs
in stock
401311301A-1.png
Nadellager (Übergröße) für unteren Traghebel, passend für Typ 3/34 (bis 12/62)
Durchmesser 47,2mm passend für Typ 3 (bis FIN 127 587) Typ 34 (bis FIN 127 587) Original-Ersatzteil, NOS (leichte Lagerspuren möglich) begrenzte Stückzahl
Order number: 401 311 301 A
€27.90 *
Prices incl. 19% VAT plus shipping costs
in stock
401311301-1.png
Needle bearing (oversize) for lower support lever, fits Type 3/34 (up to 12/62)
diameter 47.2mm fits for Type 3 (up to VIN 127 587) Type 34 (up to VIN 127 587) original spare part, NOS (slight storage traces possible) limited quantity
Order number: 401 311 301
€27.90 *
Prices incl. 19% VAT plus shipping costs
in stock
Nadellager im Achskörper unten, passend für alle Typ 3 und alle Modelle ab Bj. 08/65
Order number: 405 311 301 C
€23.50 *
Prices incl. 19% VAT plus shipping costs
in stock
Dichtring für Traghebel unten original Qualität
O-ring for lower torsion arm, original quality
fits for ball joint axle Käfer Karmann Ghia type 14 Type 147 Type 181 Type 3 (from VIN 315 000 001) Type 34 (from VIN 345 000 001) original quality spare part number for comparison 131 405 129
Order number: 405 113 129
€8.00 *
Prices incl. 19% VAT plus shipping costs
Paar Scheibenbremsachsschenkel ab 08/71, gebraucht
Order number: 405 311 311 D
€192.78 *
Prices incl. 19% VAT plus shipping costs
in stock
Paar Scheibenbremsachsschenkel 08/65 - 07/71
Pair of disc brake knuckles
Bitte wählen Sie oben die Achsschenkel passend für das Baujahr Ihres Fahrzeugs aus.
Order number: 405 311 311 F
€212.06 *
Prices incl. 19% VAT plus shipping costs
Anschlagbegrenzer, verzinkt
Pair of Stop limiter for steering knuckle, fits Type 3 & Type 34
fits for Type 3 Karmann Ghia Type 34 original spare part, NOS on vehicles with too large steering angle, it can happen that the tires of the front wheels drag on the wheel housing. The grinding can be eliminated by retrofitting the stop...
Order number: 415 311 107
€42.56 *
Prices incl. 19% VAT plus shipping costs
in stock
8.) Kunststoffbuchse für Traghebel oben, passend ab 08/64
Plastic bushing for support lever above, fit for up to 07/64
passend für Typ 3/34 (bis FIN 483 592)
Order number: 401 311 323
€20.20 *
Prices incl. 19% VAT plus shipping costs
405311597-1.png
Plug for cover plate, for Type 3/34 (till 07/71)
for vehicles with disc brake fits for Type 3 (up to VIN 311 2500 000) Type 34 original spare part, NOS few available
Order number: 405 311 597
€2.90 *
Prices incl. 19% VAT plus shipping costs
in stock
405311387A-1.png
Retaining ring 13.8 for ball joint, fits various models (from 10/63)
fits for Type 3 (from VIN 273 513) Type 34 (from VIN 273 513) Beetle (from VIN 116 000 001) Karmann Ghia (from VIN 146 000 001) Type 147 (from VIN 146 000 001) Type 181 (up to VIN 180 2847 477) original spare part, NOS limited quantity
Order number: 405 311 387 A
€0.50 *
Prices incl. 19% VAT plus shipping costs
in stock
Gummilager unten für Typ 3 Vorderachse, gebraucht
Rubber mount bottom for Type 3 front axle, used
fit for Type 3 (from VIN 317 181 002) Type 34 (from VIN 347 181 002) Original part number is for comparison only: 311 705 263 A
Order number: 705 311 263 A
€53.48 *
Prices incl. 19% VAT plus shipping costs
Schraube für Trag- und Führungsgelenk, passend für Typ 3, NOS
Screw for support and guide joint, suitable for Type 3, NOS
Hexagon screw M10 x40 fit from 10/63
Order number: 405 311 321 A
€5.61 *
Prices incl. 19% VAT plus shipping costs
in stock
Dichtung für Achsschenkel, passend für Typ 3, bis 07/65
Order number: 405 311 313
€3.30 *
Prices incl. 19% VAT plus shipping costs
in stock
405311129A-2.jpg
Seal for torsion arm, upper,fits Type 3 (08/64 up)
fits for Type 3 (from VIN 315 000 001) original spare part, NOS few available
Order number: 405 311 129 A
€14.50 *
Prices incl. 19% VAT plus shipping costs
in stock
Dichtring für Traghebel oben
Seal ring for upper torsion arm, fits Type 3/34 (from 08/64)
fits for Type 3 (from VIN 315 000 001) Karmann Ghia type 34 (from VIN 345 000 001)
Order number: 405 311 129
€16.83 *
Prices incl. 19% VAT plus shipping costs
in stock
405311641A-1.png
Sealing ring for front wheel bearing, fits various types (08/65 to 05/68)
fits for Beetle (VIN 116 000 001 to 118 857 239) Karmann Ghia (VIN 146 000 001 to 148 857 239) Type 147 (VIN 146 000 001 to 148 857 239) Type 3 (VIN 315 067 551 to 318 189 212) Type 34 (VIN 345 067 551 to 348 189 212) original spare...
Order number: 405 311 641 A
€5.90 *
Prices incl. 19% VAT plus shipping costs
in stock
405311641B-1.png
Sealing ring for wheel bearing, fits various models (05/68 to 04/00)
fits for front axle with disc brake Beetle (from VIN 118 857 239) Karmann Ghia (from VIN 148 857 239) Type 3 (from VIN 318 189 212) Type 34 (from VIN 348 189 212) Type 4 Type 181 rear axle Passat 32, 32 B & 35 i Santana Mk1 Golf Mk1, Mk2...
Order number: 405 311 641 B
€4.95 *
Prices incl. 19% VAT plus shipping costs
in stock
405311185-3.jpg
Stop limiter for steering knuckle, fits Type 3 & Type 34
fits for Type 3 Karmann Ghia Type 34 original spare part, NOS on vehicles with too large steering angle, it can happen that the tires of the front wheels drag on the wheel housing. The grinding can be eliminated by retrofitting the stop...
Order number: 405 311 185
€15.90 *
Prices incl. 19% VAT plus shipping costs
in stock
Druckscheibe, außen, für Radlager
Thrust washer, outer, for wheel bearing
fits for: Thrust washer outer for front wheel bearing, suitable for all models from year 08/65 Thrust washer for wheel bearings on the rear axle for Golf and Co.
Order number: 405 311 661
€1.50 *
Prices incl. 19% VAT plus shipping costs
in stock
Führungsgelenk oben
Order number: 405 311 361 B
€39.90 *
Prices incl. 19% VAT plus shipping costs
Anschlaggummi oben für Traghebel
Upper Rubber Snubber L/R - each
2 required per vehicle fit for Notchback - 1961 to 1973 Squareback - 1962 to 1973 Fastback - 1966 to 1973 Type 34 - 1961 to 1969
Order number: 401 311 275
€24.01 *
Prices incl. 19% VAT plus shipping costs
1 From 2
Viewed