Typ 3 1500 | 1600 - Crank Case

MotorgehausekaeferIVMJGzGEw18Lm
Novelties
Close filters
  •  
  •  
  •  
from to
No results were found for the filter!
in stock
101113118B-01.jpg
Bungs for crankcase
12,15mm x 6,5mm
Order number: 101 113 118 B
€2.79 *
Prices incl. 19% VAT plus shipping costs
in stock
101113145A-01.jpg
Order number: 101 113 145 A
€0.89 *
Prices incl. 19% VAT plus shipping costs
in stock
Entlüftungsturm Kurbelgehäuse, passend für Typ 3 und Typ 34
Crankcase vent, type 3 & type 34
fits for: Type 3 Type 34 original spare part only few available
Order number: 101 311 161 A
€38.09 *
Prices incl. 19% VAT plus shipping costs
in stock
Entlüftungsturm Kurbelgehäuse, gebraucht, passend für Typ 3 und Typ 34
Crankcase vent, used, type 3 & type 34
fits for: Type 3 Type 34 used original spare part single item
Order number: 101 311 161 AG
€21.72 *
Prices incl. 19% VAT plus shipping costs
Zylinderstift für Gehäusetrennfläche
Order number: 101 111 111
€1.11 *
Prices incl. 19% VAT plus shipping costs
in stock
Zylinderstift für Gehäusetrennfläche
Order number: 101 113 111
€1.11 *
Prices incl. 19% VAT plus shipping costs
in stock
8110100103.jpg
Engine Housing NEW, fit for 1,3 - 1,6 L orig. VW Material AS 41
inklusive 8 mm Gewindeeinsätze passend für : Käfer 1,3-1,6 Bus 1,5-1,6 bis 11/73 Karmann Ghia 1,3-1,6 Typ 3 61-67 Hersteller Autolinea
Order number: 101 111 207
€1,395.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Auszieher für den Öldruckregelkolben
Extractor for the oil pressure control piston
fits for: Bus T1 Bus T2 Fridolin Typ 147 Beetle Kübelwagen Karmann Ghia Typ 34 Karmann Ghia Typ 14 Typ 3
Order number: 000 111 555 A
€45.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Hardwarekit für Motorgehäuse Typ 1
Hardware Kit for Motor Enclosure Type 1
The kit consists of: Studs for: motor mounting, oil pump, oil cooler and fuel pump Closing plate with gasket for the oil filler on Universal housing Oil pressure control piston with springs and locking screws
Order number: 198 113 497
€42.56 *
Prices incl. 19% VAT plus shipping costs
Hardwarekit Typ 1 für 10 mm Stehbolzen
Hardware Kit Type 1 for 10 mm studs
Full set of new mounting hardware. In many ways an improvement over the original parts. Replaces all standard M8 nuts for nuts with a plastic seal, which ensure that no oil leakage along the screw thread occurs. The copper-plated exhaust...
Order number: 198 113 806
€47.50 *
Prices incl. 19% VAT plus shipping costs
in stock
Hardwarekit Typ 1 für 8 mm Stehbolzen
Hardware Kit Type 1 for 8 mm studs
Full set of new mounting hardware. In many ways an improvement over the original parts. Replaces all standard M8 nuts for nuts with a plastic seal, which ensure that no oil leakage along the screw thread occurs. The copper-plated exhaust...
Order number: 198 113 805
€55.95 *
Prices incl. 19% VAT plus shipping costs
in stock
115 311 451 165 (3).png
Oil breather and breather tower, used, fits Type 3 (up to 07/67)
fits for Type 3 (up to engine no. K 0 098 700/ T0 476 124) original spare part, used with traces of use consisting of breather tower 311 101 165 B, oil breather 311 115 451 Cap with scratches, spring and washer without filter single piece
Order number: 115 311 451 165
€79.95 *
Prices incl. 19% VAT plus shipping costs
919311081A-01.jpg
Oil pressure switch 0.3 bar, fit for Type 3/34
0.15...0.45 bar not exact classifiable please compare with existing oil pressure switch Originalsparepart, NOS few available
Order number: 919 311 081 A
€13.35 *
Prices incl. 19% VAT plus shipping costs
in stock
Ölrohr mit Abschirmblech, passend für Typ 3 und Typ 34
Oil tube with shielding plate, for various models (04/61 to 07/69)
fits for: Type 3, Type 34 (up to engine no. K 0 150 000, M 0 003 544, T 0 690 000, P 0 005 281, U 0 231 000) Beetle & Karmann Ghia (engine no. D 0 000 001 to D 0 547 157 & to engine nos. E 0 020 130, F 1 800 668, H 1 138 354 & L 0 024...
Order number: 101 311 149 A
€32.64 *
Prices incl. 19% VAT plus shipping costs
Reparatursatz für Kubelgehäuseerneuerung, passend für Typ 3/34
Repair kit for crankcase renewal, fits for Type 3/34
Set of parts to be used for crankcase renewal fits for Type 3 & Type 34 consisting of 1x plug for oil dipstick guide tube 1x bushing for oil cooler mounting 2x piston for oil pressure and oil pressure control valve 1x spring for oil...
Order number: 198 311 033
€83.74 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Chrom Moly Stehbolzen Satz 8mm
Satz Chrom Moly Stehbolzen Satz 8mm
inkl. Muttern und Scheiben passend für alle Doppelkanal Motoren Typ 1 und bei Bus T3 CT und CZ Motor
Order number: 198 043 035 DP
€139.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Verschlußstopfen
Sealing plug
8,2 mm x 8,2 mm
Order number: 101 111 119
€3.36 *
Prices incl. 19% VAT plus shipping costs
Verschlußstopfen
Sealing plug
10,2 mm x 8,2 mm
Order number: 101 111 119 B
€3.36 *
Prices incl. 19% VAT plus shipping costs
in stock
Verschlußstopfen
Sealing plug
6,2 mm x 17 mm
Order number: 101 113 112
€2.13 *
Prices incl. 19% VAT plus shipping costs
in stock
Verschlußstopfen
Sealing plug
18,2 mm x 10 mm
Order number: 101 113 118 C
€2.79 *
Prices incl. 19% VAT plus shipping costs
in stock
Verschlussstopfen
Sealing plug
8,5 mm x 8 mm
Order number: 101 113 119
€2.79 *
Prices incl. 19% VAT plus shipping costs
Verschlussstopfen für Ölrohrbohrung
Order number: 101 113 122 A
€5.50 *
Prices incl. 19% VAT plus shipping costs
in stock
101111127-01.jpg
Sealing ring for screw on crankcase
25 hp and 30 hp 10 mm x 19 mm
Order number: 101 111 127
€1.12 *
Prices incl. 19% VAT plus shipping costs
in stock
Dichtring für Zuganker
Sealing ring for tie rods
Original part 10 mm x 18 mm
Order number: 101 113 125
€1.67 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Zylinderstehbolzen, 10mm, mit Doppelkanalzylinderköpfen, passend für Typ 1
Order number: 101 111 131 S2
€99.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Zylinderstehbolzen, 8mm, mit Doppelkanalzylinderköpfen, passend für Typ 1
Set of cylinder studs, 8mm, with double channel cylinder heads, fit for Type 1
Set of cylinder studs 8mm fit for Type 1 with double channel cylinder heads Made in Germany
Order number: 101 111 131 S
€89.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Unterlegscheibe für Stiftschrauben
Washer for stud bolts
12,2 mm x 22 mm
Order number: 101 113 129
€2.23 *
Prices incl. 19% VAT plus shipping costs
Viewed