Typ 3 1500 | 1600 - engine
Novelties
No results were found for the filter!
in stock
T-piece for fuel hose, e.g. With double carburettor, fits for fuel line 8mm
Diameter: 7mm Shape: T-Piece Carburettor Type: Dual
in stock
Temperature sensor for crankcase, fits Type 3 (until 07/69)
fits for Type 3 (up to engine no. U 0 231 100) original spare part, NOS only few available
in stock
Temperature sensor for suction manifold, fits Type 3 (08/69 to 11/70)
fits for Type 3 (engine no. U 0 231 101 to U 0 395 360) observe Volkswagen technical data sheet original spare part, NOS only few available
in stock
Temperature sensor for suction manifold, fits Type 3 (from 08/69) & Type 4
fits for Type 3 (from engine no. U 0 231 101, U 5 000 000 & X 0 000 001) Type 4 original spare part, NOS only a few available
in stock
Tension spring for cooling air throttle, fit for type 3/34 (from 08/63)
fits for: Type 3 (from engine no. 255 340) Type 34 (from engine no. 255 340) Originalsparepart
in stock
Thermoswitch for cold start device of injection, fits Type 3 (until 07/69)
fits for Type 3 (up to engine no. U 0 231 100) original spare part, NOS with slightly storage traces only a few available
in stock
Throttle switch, fits Type 3 (up to 07/69)
fits for: Type 3 (up to engine no. U 0 231 100) only for fuel-injected engine original spare part, NOS
in stock
Throttle switch, suitable for Type 3 (08/69 to 07/71)
fits for: Type 3 (engine no. U 0 231 100 to U 0 502 000) only for fuel-injected engine original spare part, NOS only few available
in stock
Underlay for starter flap housing, Type 3/34
fits for: 1500 ccm engine carburetor 32 PHN original spare part
in stock
V-belt for alternator, 10x1000 mm, type 3 & type 34, 1.5-1.6 Bj 08 / 61-07 / 74
Length [mm]: 1000 Width [mm]: 10 Belts: Toothed
in stock
Vaccum Hose, diameter 4mm inner diamter, Price/Sold per Meter
Vaccum Hose inner diameter 4 mm Price sold per Meter
in stock
Vaccum Hose, diameter 5,5x3mm, black, Price/Sold per Meter
aguide to the promotion of unleaded fuels Can be used for gasoline, oil, diesel, petroleum aromatics, lubricants and liquids based on mineral and glycol Temperature range: -35°C to +90°C, short-term +110°C
Vacuum canister of the ignition distributor, fits Type 3/34 (08/63 to 07/64)
fits for Type 3 (engine no. 255 340 to 633 330) Type 34 (engine no. 255 340 to 633 330) for the following ignition distributor 341 905 205 (ZV/JCU 4 R 3)
in stock
Vacuum unit for distributor, fit for 40-50 PS(29-37KW)
Bitte vergleichen Sie vor der Bestellung dieses Artikels die VW Teilenummer Ihres Zündverteilers mit den hier angebenen. Artikel ist geeignet für : 113 905 205 AL 113 905 205 AN
in stock
Valve Cones Set, 25/37 kW (34-50 PS)
suitable for: Beetle, Karmann ab Bj 8/60 Kübel Bj 8/69 bis 12/79 Bus T1 Bj 8/60 bis 7/67 Bus T2 Bj 8/67 bis 7/79 Bus T3 Bj 8/79 bis 7/92 Golf MK1 Bj 1/79 bis 7/93 Golf MK2 Bj 8/83 bis 7/92 Scirocco Bj 2/74 bis 7/92
in stock
Valve cover gasket fit for 1.2-1.6 from 01/62 & WBX, original quality
this valve cover gasket is made by a traditional manufacturer in Germany also note the graduated price and save!
in stock
Valve Cover Seal 1,7/1,8/2,0
fit for: Bus T2 engine 1.7 - 1.8 built in 08/71 to 07/75 Bus T2 and T3 engine 2.0 year of construction 07/75 to 12/82 Porsche 914 engine 1.7 - 1.8 built from 01/69 to 02/76
in stock
Valve cover vents (Per Pair)
Nipples for venting for the valve covers for performance-enhanced motors Scope of delivery 2 pieces with seal
in stock
Valve covers evolution, suitabel for all Type 4 engines
german product suitzable for all Type 4 engines
in stock
Valve guides, standard (12.1), inlet 8 mm (4 pieces)
Type 1 1300-1600 CT/CZ 1600 Water boxer engines 1900-2100
Ventlil bearing for injection valve, inside
fits for: Type 3 (up to engine no. U 0 384 499) Type 4 (up to engine no. W 0 057 035) original spare part, NOS
NEW
in stock
Verteilerfinger, entstört, für Riesenverteiler ZV/PAU (05/60 bis 07/67)
für Zündverteiler Bosch ZV/ PAU 4 R1 bis R6 (Verteilerkappe 90mm Ø) mit Staubschutzrille passend für Käfer (Motor-Nr. 3 912 904 bis D 0 234 014) Karmann Ghia (Motor-Nrn. 5 000 001 bis 9 800 000) Bus T1 (Motor-Nrn. 5 000 001 bis 8 350 224...
in stock
Voltage regulator 6 Volt for alternator
Our tip : If you want to keep the original look, you can take over the cover of your old regulator, since the cover is only screwed.
in stock
Woodruff key, crank pulley, fit for Type 1
Thickness: 6mm Height: 9mm Length: 21mm Equipment Variant: For crank pulley Specification: Woodruff key
in stock
Zündkabelsatz passend für Typ 3 & Typ 34
Kupfer-Zündkabel 7mm Zündkerzenstecker M4 funkentstört DIN-Zündverteiler- & Zündspulenstecker passend für alle Typ 3 & Typ 34 hergestellt in Deutschland
in stock
Zylinderkopf, bestückt, Austauschteil, passend für Typ 3 1500 S (08/63 bis 07/65)
passend für Typ 3 1500 S Motornr. 255 340 bis 1 100 000 mit oder ohne Kennbuchstabe R original-Ersatzteil, Austauschteil bestückt Einlaßventil 35 mm Ø Auslaßventil 32 mm Ø Einlass ca. 30mm Ø, abgeschrägt für 1500 S Ansaugrohre wenige...
in stock
Zylinderkopf, bestückt, Austauschteil, passend für Typ 3 1500 S (08/63 bis 07/65)
passend für Typ 3 1500 S Motornr. 255 340 bis 1 100 000 mit oder ohne Kennbuchstabe R original-Ersatzteil, Austauschteil bestückt Einlaßventil 35 mm Ø Auslaßventil 32 mm Ø Einlass ca. 30mm Ø, abgeschrägt für 1500 S Ansaugrohre wenige...
in stock
Viewed