Golf MK I - Bits and Boldts

Kleinteile
Neuheiten
Close filters
  •  
  •  
  •  
  •  
from to
1 From 2
No results were found for the filter!
Verkleidung/Spoiler für A-Säule, für rechts und links, passend für Golf I GTI
A-pillar trim for left and right, GTI
Set for left and right Original fixed at: Golf I GTI Golf I GTD Golf I Formel E also can be mounted: Golf I Cabrio Caddy I Jetta I OE Part NR is : 171 853 293 A 171 853 294 A Made by WERK34
Order number: 853.171.294 A
€49.00 *
Prices incl. VAT plus shipping costs
Gummipuffer / Anti Vibrationspuffer für Haubenstange
Order number: 823.171.481 A
€1.90 *
Prices incl. VAT plus shipping costs
in stock
Abdeckung für Öffnung der Stoßstangenführung
Bolt cover cap
fit for Golf I + Cabrio Jetta I Caddy I unit price
Order number: 821 171 163
€2.90 *
Prices incl. VAT plus shipping costs
in stock
Sechskantschraube M10x15, z.B. für Türscharnier
Bolt, M10x15, for door hinge
bolt M 10x15, e.g. for door hinge made by WERK34
Order number: N 903 079 01
€2.50 *
Prices incl. VAT plus shipping costs
in stock
Anschlagpuffer Motorhaube
Bonnet guide piece
fits for Golf I + Cabrio Caddy I made by WERK34 !ATTENTION: the price stated below is the unit price of the article!
Order number: 823.171.493
€5.00 *
Prices incl. VAT plus shipping costs
in stock
Stopfen in der Türkante, schwarz
Bungs for the door pillar, black
Single unit price Made by WERK34
Order number: 880.171.749 A
From €2.50 *
Prices incl. VAT plus shipping costs
in stock
Spreizniet, dunkelgrau, 8x11mm passend z.B. für Steinschlagschutzecke
Order number: N 038 550 1
€0.35 *
Prices incl. VAT plus shipping costs
in stock
Halter für Haubenaufsteller
Clip for the bonnet stay
fits for: Golf I Golf II Jetta I + II made by WERK34
Order number: 823.867.397
€0.90 *
Prices incl. VAT plus shipping costs
Klammer für Wasserabweiser/Verkleidung
Clip for water deflector / cover
clip for water deflector/ cover fits for: Golf I: 3 pcs Golf II: 5 pcs Scirocco I + II: 4 pcs Jetta I: 3 pcs Jetta II: 5 pcs unit price made by WERK34
Order number: 819.191.415 A
€0.90 *
Prices incl. VAT plus shipping costs
in stock
Türscharnierhälfte passend z.B. Golf 2, Corrado, etc.
Door Hinge half, Left & Right
fit for Golf II Jetta II Corrado Scirocco II M10 thread with adaptations also fit for Golf I + Cabrio Jetta I Caddy I Bus T3 M8 thread (have to be drilled ) incl. washer unit price Made by WERK34
Order number: 831,321.403
€8.90 *
Prices incl. VAT plus shipping costs
in stock
Abdeckung für Spiegel / Blindstopfen für Spiegel
Door Mirror delete cap / plug
Door Mirror Delete Cap. Cap fit into screw holes for door mirror and provide a finished look for those who choose not use a side view mirror fit for e.g. Golf MK1+ MK2, Scirocco MK1 +2 Made by WERK34
Order number: 857.171.573 B
€9.90 *
Prices incl. VAT plus shipping costs
in stock
Spreizmutter, schwarz, z.B. für Radhausverkleidung Golf I Cabrio
Expanding nylon nut, clipper body kit
fits for Golf Cabrio unit price made by WERK34
Order number: 853.533.139
€0.90 *
Prices incl. VAT plus shipping costs
Federscheibe M6
Order number: N 012 226 5
€0.09 *
Prices incl. VAT plus shipping costs
in stock
Kotflügelschraube 6,3x19 mit Scheibe 1,6x18
fender screw 6,3 x 19 with washer 1,6 x 18
unit price Golf I: 6 pcs for each fender
Order number: 821 311 143
€0.50 *
Prices incl. VAT plus shipping costs
in stock
Füllstück / Gummi für Haube
Filler piece for the bonnet
fits for: Golf I + Cabrio Jetta I self-adhesive material: foam rubber made by WERK34
Order number: 823.171.729
€3.50 *
Prices incl. VAT plus shipping costs
in stock
Kennzeichenhalter vorne, passend für Golf I und Caddy
Front number plate bracket
fits for Golf I and Caddy excellent quality reinforced black coated fits for 52th license plates direct replacement for the original fits for plastic bumpers (for metal puh rods you need to drill to 2 holes) mady by WERK34
Order number: 806.171.099
€39.00 *
Prices incl. VAT plus shipping costs
in stock
Blindstopfen schwarz z.B. Haube, Heckklappe etc
Grommet 30 / 40mm e.g. for bonnet or tailgate
black plastic outer diameter 40mm fits for a hole diameter of app. 30-32 mm made by WERK34
Order number: N.034.001
€1.90 *
Prices incl. VAT plus shipping costs
in stock
Abdeckstopfen für Antennenloch/Antenne, passend für Golf, Corrado etc.
Grommet aerial blanking plug, fits for Golf, Corrado etc.
fits for: Mk1/2 Golf/Jetta color: black diameter: app. 22 mm made by WERK34
Order number: 821.443.169
€5.90 *
Prices incl. VAT plus shipping costs
in stock
Stopfen/Durchführung für Bodenblech 30mm
Grommet for Boot Floor, 30mm
fits for: Golf I - IV Golf I cabrio Caddy I - III Scirocco I - II Corrado Porsche 924/944 etc. unit price diameter: 30 mm made by WERK34
Order number: 803.803.583 A
€5.00 *
Prices incl. VAT plus shipping costs
in stock
Tülle rechts und links für Kabeldurchführung an der Heckklappe
Grommet for wiring harness and washer hose from the body to the tailgate
fits for: Golf MK1 Golf MK1 Cabriolet Jetta MK1 Scirocco MK1 price for one set for left and right (2 pcs) made by WERK34
Order number: 971.171.840 A
€9.90 *
Prices incl. VAT plus shipping costs
in stock
Durchführung / Gummi 23,5mm / 6mm
Grommet. Various Applications, 23.5/6mm
this seal is fixed with nearly each vehicle e.g.: beetle: where the fuel flexi pipe meets the body bus T2: carrying out the fuel pipe bus T3: carrying out the hydraulic line made by WERK34
Order number: 119.021.569 A
€3.00 *
Prices incl. VAT plus shipping costs
Blende in Frontblech geschlossene Version, passend für Golf I + Cabrio
Lower grille for front apron, "Closed" Version
fits for: Golf MK1 Golf MK1 Cabriolet Jetta MK1 Caddy MK1 made by WERK34
Order number: 853.171.662
€29.00 *
Prices incl. VAT plus shipping costs
Blende in Frontblech offene Version, passend für Golf I + Cabrio
Lower grille for front apron, "Open" Version
fits for: Golf Mk1 Golf MK1 Cabriolett Jetta MK1 Caddy MK1 made by WERK34
Order number: 853.171.661
€29.00 *
Prices incl. VAT plus shipping costs
in stock
Anbausatz für Kotflügel, 10-teilig, passend für Golf I
Mounting Kit for Frint Fender, 10pcs, fit for Golf MK1
Kit included 1x Speed Nut 9x Screw
Order number: 16752
€4.50 *
Prices incl. VAT plus shipping costs
Anbausatz für einen Wischerarm, passend für Golf I
Mounting kit for one Wiper Arm, fit for Golf MK1
Set included 1x Seal Body to Wiper Shaft 1x Plug for Wiper Arm 1x Cover for Wiper Shaft 1x Nut 1x Washer
Order number: 16578
€5.90 *
Prices incl. VAT plus shipping costs
in stock
Gummischeibe unter Kühler / zwischen Trittbrett und Kotflügel
Mounting rubber washer for radiator/running board
Washer between Radiator and Body fit for Golf Mk1 Golf MK1 Cabrio Golf MK2 Jetta MK1+MK2 Scirocco MK1+2 Bus T3 Washer between Runing board and wing fit for Beetle all Washer on bumper corners T2a
Order number: 121.171.276 D
€0.30 *
Prices incl. VAT plus shipping costs
Mutter M6
Nut M6
Made in Germany !ACHTUNG: Bei dem unten angegebenen Preis handelt es sich um den Stückpreis des Artikels!
Order number: N 011 006 24
€0.40 *
Prices incl. VAT plus shipping costs
in stock
Bolzen für Heckklappendämpfer, Golf I
Pin for the rear tailgate strut
fits for Golf I + Convertible made by WERK34
Order number: 827.171.627
€3.00 *
Prices incl. VAT plus shipping costs
Platte mit Gurtgewinde zum Einschweißen Bus T1, Käfer
Order number: 857 111 745
€7.50 *
Prices incl. VAT plus shipping costs
in stock
Stopfen für Heckklappe, passend für Golf I Cabrio
Plug for tailgate, fits for Golf MK1 Cabrio
Plug for Tailgate 22mm for a vehicle 6 pieces are required Single unit Price Made by WERK34
Order number: 827.155.713 A
€1.19 *
Prices incl. VAT plus shipping costs
in stock
Blindniet, schwarz, 4x14, z.B. für Radlaufverbreiterung
Order number: N 906 349 01
€0.35 *
Prices incl. VAT plus shipping costs
in stock
Metallklammer / Presslochmutter 6.5mm
Order number: 805.171.445
€0.69 *
Prices incl. VAT plus shipping costs
in stock
Gummischeibe/Dichtung zwischen Stoßstangenführung und Karosserie
Rubber washer / seal between bumper guide and body
Fits for various VW models 29 x 15 x 2 mm Made by WERK34
Order number: N 901 742 01
€1.10 *
Prices incl. VAT plus shipping costs
in stock
Verkleidung unter Windlauf/ Wasserablauf, passend für Golf I, Golf I Cabrio
Scuttle Rain Cover, fit for Golf MK1
Fit for Golf MK1 Golf MK1 Cabrio Jetta MK1 Caddy MK1
Order number: 819.171.415 F
€29.90 *
Prices incl. VAT plus shipping costs
in stock
Verkleidung unter Windlauf/ Wasserablauf, lange Version, passend für Golf I
Scuttle Rain Cover, long /AC Version, for Golf Mk1
Replacement AC rain trays for MK1 chassis cars. Made from a thick, durable ABS and are much stronger than the originals. Included in the sale is a set of four of our upgraded clips to hold the rain tray in place. Since these are much...
Order number: 819.171.415 D
€69.90 *
Prices incl. VAT plus shipping costs
in stock
Dichtung für Wischerwelle hinten
Seal for rear wiper Mechanism
fit for Golf MK 1 Scirocco MK 1 + 2 Bus T3
Order number: 955.171.729
€1.09 *
Prices incl. VAT plus shipping costs
in stock
Stegdichtung auf Stehwand, passend für Golf I und Cabrio
Seal, for the plastic scuttle tray, cabrio
fits for: Golf I + Cabrio Jetta I Scirocco I made by Werk 34
Order number: 819 .171.519 C
€19.00 *
Prices incl. VAT plus shipping costs
Satz Clips für Zierleiste, 52-teilig, passend für Golf I
Set of Clips for Body Trim, 52pcs, fit for Golf MK1
Set included 40x Clip for upper trim 12x Clip for lower trim
Order number: 16582
€15.90 *
Prices incl. VAT plus shipping costs
in stock
Spezial-Klebe-Set zur Verklebung des Rückspiegels an die Windschutzscheibe
Order number: 10544
€6.90 *
Prices incl. VAT plus shipping costs
in stock
Blechmutter / Schnappmutter 4,2 x 16,5 x 11,25
Speed Nut 4,2 x 16,5 x 11,25
Unit Price
Order number: N 015 42 92
€0.39 *
Prices incl. VAT plus shipping costs
in stock
Blechmutter / Schnappmutter 6,3
Speed Nut 6,3
For screw size 6.3 Length 26mm Width 15mm unit price
Order number: N 015 432 2
€0.39 *
Prices incl. VAT plus shipping costs
in stock
Federmutter / Käfigmutter 6,3
Speednut 6,3
Unit Price
Order number: N 012 06 22
€0.90 *
Prices incl. VAT plus shipping costs
in stock
Spritzwand Verschlussbleche - Cleaning Set für Golf I + Cabrio
Spritzwand Verschlussbleche - Cleaning Set für Golf I + Cabrio
Du willst deinen Motorraum cleanen ? Mit dem MK1 Garage Cleaning Set Blech findest du alle benötigten Verschlussronden exakt passend für die Löcher in deinem Motorraum inkl. Abdeckung der Heizung Einfach rausbrechen und im passenden Loch...
Order number: 16965
€49.00 *
Prices incl. VAT plus shipping costs
in stock
Aufkleber "clean" für Tankloch Golf I Cabrio ab 1984
Sticker "clean" for filler neck, from 08/83
fits for: Golf I Cabrio from 08/83Scirocco II clean foil with structure made by WERK34
Order number: 010.155.024 W
€4.00 *
Prices incl. VAT plus shipping costs
Aufkleber für Tankloch, passend für Golf I Cabrio ab 1984
Sticker for fuel tank, fit for Golf I Cabrio 1984 - 93
fit for Golf I Cabrio 1984 model Scirocco II with imprint "unleaded"
Order number: 010.155.024 P
€6.00 *
Prices incl. VAT plus shipping costs
in stock
Aufkleber für Tankloch Golf I + Cabrio -84
Sticker for fuel tank, up to 07/83
fits for: Golf I + Cabrio until 07/83 foil with structure made by WERK34
Order number: 806.173.110 A
€8.00 *
Prices incl. VAT plus shipping costs
in stock
Drehlager- Ausstellfensterbremse passend z.B. für Golf I
Vent Window Pivot, fit for Golf MK1
Leadership Ausstellfensterbremse This guide is snapped into the frame of the opening window and guides the turntable Fits: Golf I Jetta I Polo I Derby I Caddy I
Order number: 837.171.455
€19.90 *
Prices incl. VAT plus shipping costs
in stock
Wasserablaufventil für Stahlschiebedach
Water drain valve for sunroof
for one vehicle 2 pcs are required fits for: Golf MK1 Jetta MK1 made by WERK34
Order number: 877.175.243
€5.00 *
Prices incl. VAT plus shipping costs
1 From 2
Viewed