Bus T1 - engine
Novelties
No results were found for the filter!
in stock
Set of contact breaker points, fits various models (08/60 to 07/68)
fits for the following ignition distributors 111 905 205 L to 111 905 205 N 113 905 205 K 131 905 205 311 905 205 D to 311 905 205 G 315 905 205
in stock
Set of contact breaker points, fits various models (from 08/67)
one-piece with angled plug fits for the following ignition distributors (air cooled models) 113 905 205 P / AA / AB / AC / AD / AE / AH / A J / AK / AL / AM / AN 211 905 205 R / Q / S 311 905 205 R / L / P / S / AA / T / AB / M / AC / AD...
Set of contact breaker points, fits various models (until 07/60)
fits for the following ignition distributors 111 905 205 211 905 205 C / 211 905 205 E / 211 905 205 F
in stock
Set of contact breaker points, fits various models (until 07/64)
fits for the following ignition distributors 111 905 205 C / 111 905 205 F 341 905 205
Set of Crankshaft Bearings-25/37 kW (34/50 PS)
Standard = standard measure/normal measure, 0.25 = 1.Oversize and/or undersize, 0.50 = 2.Oversize and/or undersize, 0.75 = 3.Oversize and/or undersize. Further measures on request.
in stock
Set of Crankshaft Bearings-25/37 kW (34/50 PS)
Standard = standard measure/normal measure, 0.25 = 1.Oversize and/or undersize, 0.50 = 2.Oversize and/or undersize, 0.75 = 3.Oversize and/or undersize. Further measures on request.
in stock
Set of Crankshaft Bearings-25/37 kW (34/50 PS)
Standard = standard measure/normal measure, 0.25 = 1.Oversize and/or undersize, 0.50 = 2.Oversize and/or undersize, 0.75 = 3.Oversize and/or undersize. Further measures on request.
in stock
Set of Crankshaft Bearings, fits 25/30hp engines (till 07/65)
standard case dimensions standard Crankshaft dimensions fits for Beetle (up to engine no. 4 050 000) Karmann Ghia (up to engine no. 4 050 000) Typ 147 "Fridolin" (up to engine no. 4 050 000) Bus T1 (up to engine no. 3 399 999)
in stock
Set of Crankshaft Bearings, until 18/22 kW (25/30 PS)
Standard = standard measure/normal measure, 0.25 = 1.Oversize and/or undersize, 0.50 = 2.Oversize and/or undersize, 0.75 = 3.Oversize and/or undersize. Further measures on request.
in stock
Set of cylinder studs, 8mm, with double channel cylinder heads, fit for Type 1
Set of cylinder studs 8mm fit for Type 1 with double channel cylinder heads Made in Germany
in stock
Set of dowel pins for flywheel, fits up to 07/65
dowel pins 6mm x 18,3mm fits for 25/30 HP engines spare part numbers for comparison 111 105 277 & 111 105 277 A
in stock
Set of Engle pestles hardened 100 grams
Engle tappets hardened and lightened 28 mm fit for all Engle camshafts in type 1 engines
Set of Inspection Parts 25-37kw(34-50HP) after 08/71
Set bestehend aus Zündkerzen mit Kurzgewinde Benzinfilter Schlauchschellen Ölwechsel-Dichtsatz Papier-Luftfilter (nicht passend für Käfer 1600i Mexico Einspritzer)
in stock
Set of piston rings (for all four pistons) with oil control rings, 77mm 2.5 x 2.5 x 4, standard dimensions
fits for: type 1 engines 1200cc (30 and 34 HP) up to engine no. D 0 992 260 dimensions: upper piston ring 2.5mm lower piston ring 2.5mm oil scraper ring 4.0mm
Set of piston rings 83.5mm (1st oversize), fits Beetle, Type 3 & Bus T1
fits for: Beetle (up to engine no. H 0 823 799 & L 0 018 179) Type 3 (engine no. K 0 000 001 to K 0 078 229) Bus T1 (engine no. H 0 000 001 to H 0 703 230) consisting of 4 x piston ring, top 83.5 mm 4 x piston ring, bottom 83.5 mm 4 x...
in stock
Set of piston rings 83.5mm (1st oversize), fits Type 3/34 & Bus T1 (up to 07/65)
fits for: Type 3/34 (up to engine no. 1 100 000) Bus T1 (up to engine no. 1 100 000) consisting of 8 x piston ring 83.5 mm 4 x oil scraper rings with hose spring 83.5 mm original spare part set, NOS only few available
in stock
Set of piston rings 83mm (standard size), fits Type 3/34 & Bus T1 (till 07/65)
fits for: Type 3/34 (up to engine no. 1 100 000) Bus T1 (up to engine no. 1 100 000) consisting of 8 x piston ring 83 mm 4 x oil scraper rings with hose spring 83 mm original spare part set, NOS only few available
Set of piston rings, oversize, suitable for Type 3/34 & Bus T1 (up to 07/65)
fits for: Type 3/34 (up to engine no. 1 100 000) Bus T1 (up to engine no. 1 100 000) consisting of 8 x piston ring 84 mm 4 x oil scraper rings with hose spring 84 mm original spare part only few available
in stock
Set of pistons and cylinders with piston rings and bolts, 83x69, 1493ccm
fit for 1500 engine Manufacturer Kolbenschmidt 83mm bore Stroke 69mm Cylinder head 94 Piston pin 22mm Originalpartnumber for comparison 311 198 063 H
in stock
Set of Push Rod Tubes , stainless-steel, fits for 29-37 kW (40-50 PS)
stainless-steel good finish and surface high Quality polished surface set includes 8 Push Rod Tubes fits for all air cooled engines with 29 - 37 kW Made by WERK34
in stock
Set of push rods, fits 30 & 34 hp engines (till 01/64)
length 268mm follow repair guide M6! fits for Beetle, Karmann Ghia (engine no. 5 000 001 to 8 339 392) industrial engine type 122/2 (up to engine-no.122 -124 090) Bus T1 (engine no. 3 400 000 to 7 816 340) original spare part set, NOS...
Set of pushrods, fits all Boxer engines
Heads only on one side ready mounted, other sides can be brought to the appropriate length before the heads are mounted.
Set of pushrods, heavy duty, fits all Boxer engines
Heads only on one side ready mounted, other sides can be brought to the appropriate length before the heads are mounted.
in stock
Set of series tappets, fit for all engines with 25 to 37 kW (34 to 50 HP)
Original quality Manufacturer: FEBI Bielstein Set consists of 8 pieces
in stock
Set of valve guides (4 pieces), suitable for Type 1 engine with 30 PS
suitable for: Beetle Karmann Ghia Bus T1 standard 10,2 mm/7 mm
in stock
Set of valve guides, 1st oversize, fits Type 4 engines & WBX
bronze alloy with high wear resistance and good fatigue and corrosion resistance for exhaust valves inner dimension 8.98mm outer dimension 13.11 mm length 66.5mm
Set of valve springs series, fit for 31 to 37 kW (42 to 50 HP) consisting of 8 pieces
fits for: 1300 to 1600cc although slightly stronger they can also be used for 1200s
in stock
Setb of lifter rod housing seals (16 Pieces), type 1 engine & WBX
fits for Beetle (from engine no. 5 000 001) Karmann Ghia (from engine no. 5 000 001) Type 147 Bus T1 (from engine no. 3 400 000) Bus T2 Bus T3 Typ 3 Typ 34 Typ 181 german quality product
in stock
Shield plate for cylinder cover, for type 1 engines (12/62 to 07/64)
for 30 and 34 hp engines, fits left and right fits for Beetle (engine no. 3 959 223 to 3 972 440 & 7 336 420 to 8 796 622) Karmann (engine no. 3 959 223 to 3 972 440 & 7 336 420 to 8 796 622) Type 147 (up to engine no. 3 972 440 & 8 796...
in stock
Shielding plate leftt, fits single channel preheating (from 05/60)
type 1 engines 1200 to 1600ccm with single preheating fits for Beetle (from engine no. 7 336 420) Bus T1 (from engine no. 5 000 001) Karmann Ghia (from engine no. 7 336 420) Type 147 (from engine no. 7 336 420) Bus T2 Type 181 original...
in stock
Shielding plate right, fits single channel preheating (from 05/60)
type 1 engines 1200 to 1600ccm with single preheating fits for Beetle (from engine no. 7 336 420) Bus T1 (from engine no. 5 000 001) Karmann Ghia (from engine no. 7 336 420) Type 147 (from engine no. 7 336 420) Bus T2 Type 181 original...
in stock
Shim for cylinder head 0.8 mm, fit for 1500 & 1600 (from 07/62)
fits for: Type 3 (starting engine no. 065 746) Type 34 (starting engine no. 065 746) T1 T2 T3 (not diesel) originalsparepart only few available
in stock
Shim for cylinder head 1.0 mm, fit for 1500 & 1600 (from 07/62)
fits for: Type 3 (starting engine no. 065 746) Type 34 (starting engine no. 065 746) T1 T2 T3 (not diesel) originalsparepart only few available
in stock
Shim for cylinder head 1.5 mm, fit for Type 3 & Type 34
fits for: Type 3 (starting engine no. 065 746) Type 34 (starting engine no. 065 746) T1 T2 T3 (not diesel) originalsparepart only few available
in stock
Sicherheitsabschaltung Benzinpumpe 12 Volt
Aus Sicherheitsgründen darf bei Motorstillstand die Benzinpumpe nicht fördern. Was bei einer mechanischen Benzinpumpe selbstverständlich ist, wird interessant bei der Nachrüstung auf eine elektrische Benzinpumpe. Hier muss eine...
in stock
Sicherungsscheibe für Schwungrad, passend für Typ 1 Motoren
passend für Motoren ab 25 bis 50 PS Original-Ersatzteil, NOS deutsches Produkt begrenzte Stückzahl außen 42mm Ø innen 29mm Ø Materialstärke 1,35 mm
in stock
Silicone crank seal standard (flywheel side)
suitable for: Bus T1 Engines 1200 (except 25-30HP) Bus T1 Engines 13-1600 Typ3 Bus T3 only CT/CZ engines
Viewed