Bus T1 - Fly wheel

Schwungscheibe
Novelties
Close filters
  •  
  •  
from to
No results were found for the filter!
Riemenscheibe aus Aluminium mit blauer Gradeinteilung, im Durchmesser wie Serien, passend für Typ1
Order number: 105 113 254 B
€69.00 *
Prices incl. 19% VAT plus shipping costs
Riemenscheibe Typ 1 146mm
Belt pulley type 1, 146 mm
Made of high-strength aluminum, black anodised. Diameter: 175 mm.
Order number: 253 105 146 OSC
€74.60 *
Prices incl. 19% VAT plus shipping costs
Riemenscheibe Typ 1 175mm
Belt pulley type 1, 175mm
Made of high-strength aluminum, black anodised. Diameter: 175 mm.
Order number: 253 105 175 OSC
€96.23 *
Prices incl. 19% VAT plus shipping costs
in stock
Verchromte Befestigungsschraube Extra Lang mit Unterlegscheibe, passend für Typ 1 Motoren
Chrome Pulley Bolt & Washer
Extra long chrome Pulley must be used with Bolt-in Sand Seal Pulleys suitable for 181 Thing 09/69-02/79, 1.5-1.6 Karmann Ghia 08/55-07/74, 1.2-1.6 Bus T1 01/50-07/67, 1.2-1.5 Bus T2 08/67-07/79, 1.6 Type 1 12/47-12/85, 1.2-1.6
Order number: 821 311 144
€8.25 *
Prices incl. 19% VAT plus shipping costs
in stock
Chromoly Schwungrad, 12 Volt, 130 Zähne, 200 mm
Chromoly racing flywheel, 12 Volt, 130 teeth, 200 mm
Chromoly racing flywheel 12 Volt 130 teeth 200 mm suitable for Thing 181 09/69-07/73, 1.5-1.6 Karmann Ghia 08/66-07/73, 1.5-1.6 Bus T1 08/66-07/67, 1.5 Bus T2 08/67-07/73 Type 1 08/66-07/73, 1.5-1.6
Order number: 105 311 271 JP
€187.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Riemenscheibe, passend für 30PS Motoren, original Teil
Crankshaft Pulley, fit for 30PS, NOS
Chassis Nr. 3 072 320 - 4 050 000
Order number: 105 111 251 B
€74.60 *
Prices incl. 19% VAT plus shipping costs
Passstift für Schwungscheibe
Dowel Pin for Flywheel
Dowel pin 8mm fits for Beetle, Karmann Ghia (from engine no. 3 400 000) Type 147 Type 181 Bus T1 (from engine no. 3 400 000) Bus T2 (1600cc) Bus T3 (engine code CT & CZ)
Order number: 105 111 277
€1.90 *
Prices incl. 19% VAT plus shipping costs
in stock
105111265-1.JPG
Federscheibe für Andrehklaue
passend für Adrehklaue außen 44 mm Ø innen 23mm Ø Materialstärke 1,63 mm Original-Ersatzteil, NOS begrenzte Stückzahl
Order number: 105 111 265
€4.90 *
Prices incl. 19% VAT plus shipping costs
in stock
Schwungradblockierer, ideal zum Lösen von Kupplungs- und Schwungradschrauben
Flywheel locker, ideal for loosening clutch and flywheel bolts
fits for: Bus T1 Bus T2 Bus T3 Typ 3 Typ 4 Kübelwagen Fridolin TYp 147 Beetle Karmann Ghia Typ 34 Karmann Ghia Typ 14
Order number: 000 111 551
€14.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Schwungscheibe Serie, 130 Zähne, 200mm, original Teil
Flywheel Serial, origianl part
130 teeth 200mm new and original part
Order number: 105 311 271 CO
€219.00 *
Prices incl. 19% VAT plus shipping costs
in stock
105311271E-1.jpg
Flywheel, 200mm, facilitates
Flywheel 200 mm facilitates eightfold pinned ideal for light to medium modified engines fits for: Beetle Bus T1 Bus T1 Brasil Bus T2a Bus T2b Karmann Ghia Type 3 Type 181
Order number: 105 311 271 E
€89.95 *
Prices incl. 19% VAT plus shipping costs
1570.21cce939.jpg
Flywheel, suitable for 1,5/1,6 + Mexico beetle from 1980
suitable for 1,5/1,6 Mexico Beetle from 1980 120 teeth for Clutch 200mm
Order number: 105 311 271
€89.95 *
Prices incl. 19% VAT plus shipping costs
in stock
105211261-1.jpg
hand crank nut, fits different models
fits for Beetle from 46 (partly) Bus T1 (partly for 25 hp & 30 hp) Type 181 Thing industrial engine type 122, 122/1, 122/2, 126 original spare part, NOS version with hole through shaft 11,5 mm Ø hole for crank 21 mm Ø shaft length 18 mm...
Order number: 105 211 261
€29.50 *
Prices incl. 19% VAT plus shipping costs
in stock
105111305-1.jpg
Hohlschraube für Schwungscheibe mit Laufbuchse, passend für 25 PS (bis 11/53)
passend für 25 PS (bis Motornr. 1-695 281) mit Laufbuchse (erste Ausführung) original-Ersatzteil, NOS wenige vorhanden
Order number: 105 111 305
€24.96 *
Prices incl. 19% VAT plus shipping costs
in stock
Hohlschraube für Schwungscheibe mit Nadellager, passend für Motoren mit 25-37 KW (34-50PS)
Hollow Screw for Flywheel with Needle Bearing
Beetle, Bus, 25-37 kW (34-50 PS)
Order number: 105 111 305 E
€13.90 *
Prices incl. 19% VAT plus shipping costs
in stock
Hohlschraube für Schwungscheibe mit Nadellager, passend für Modelle mit 18/22KW (25/30PS)
Hollow Screw for Flywheel with Needle Bearing
Beetle, Bus - 18/22 kW (25/30 PS)
Order number: 105 111 305 C
€16.90 *
Prices incl. 19% VAT plus shipping costs
in stock
105113279A-1.jpg
Metal gasket for flywheel, fits various models (08/60 to 04/66)
for flywheel 113 105 271 B & 211 105 271 fits for Beetle (up to engine no. D 0 076 331, E 0 004 200 & F 0 741 384) Karmann Ghia (up to engine no. D 0 076 331, E 0 004 200 & F 0 741 384) Type 147 (up to engine no. D 0 076 331) Bus T1...
Order number: 105 113 279 A
€2.49 *
Prices incl. 19% VAT plus shipping costs
in stock
105111279-1.JPG
Paper gasket for flywheel, fits for 25 & 30 hp
fits for 25 & 30 HP engines original spare part, NOS
Order number: 105 111 279 A
€1.99 *
Prices incl. 19% VAT plus shipping costs
in stock
105111313A-01.jpg
Pilot shaft bearing
This bearing is located in the flywheel bolt of a type 1, type 3 and CT/CZ engine and in the crankshaft of a type 4, WBX and diesel engine. It is advisable to always replace this bearing when you are going to replace the clutch disc and...
Order number: 105 111 313 A
€7.02 *
Prices incl. 19% VAT plus shipping costs
in stock
Wellendichtring-Kit für Riemenscheibe
Pulley shaft seal kit
This pulley shaft seal kit was not originally installed and can be used if oil leaks from the pulley. In most cases, this will prevent the engine from being completely disassembled and stop the oil leakage. This kit is consisting of...
Order number: 105 111 251 K
€20.90 *
Prices incl. 19% VAT plus shipping costs
in stock
Riemenscheibe aus Aluminium mit roter Gradeinteilung, im Durchmesser wie Serie, passend für Typ1
Order number: 105 113 254 R
€60.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Riemenscheibe aus Aluminium mit schwarzer Gradeinteilung, im Durchmesser wie Serie, passend für Typ1
Pulley, aluminium, fit for Typ 1
passend für Typ 1 Motoren Käfer Karmann Ghia Bus T1 Bus T2 Kübelwagen 181 Durchmesser 170mm Gradeinteilung mit schwarzen Ziffern
Order number: 105 113 254 S
€60.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Schwungscheibe (erleichtert),passend für 18/22kw(25-30 PS), mit 180 mm Durchmesser
Schwungscheibe (erleichtert),passend für 18/22kw(25-30 PS), mit 180 mm Durchmesser
Passend für 18/22kw (24,5-30 PS) mit 180 mm Durchmesser Old Speed Racing ist gerade schwer angesagt, also frisieren Sie Ihr treues 24,5 oder 30 PS Aggregat mit einem erleichterten Schwungrad. Ersetzen Sie das alte, abgenutzte...
Order number: 105 111 271 R
€425.00 *
Prices incl. 19% VAT plus shipping costs
in stock
105111297-1.JPG
Sicherungsscheibe für Schwungrad, passend für Typ 1 Motoren
passend für Motoren ab 25 bis 50 PS Original-Ersatzteil, NOS deutsches Produkt begrenzte Stückzahl außen 42mm Ø innen 29mm Ø Materialstärke 1,35 mm
Order number: 105 111 297
€4.90 *
Prices incl. 19% VAT plus shipping costs
in stock
Abstandring für Schwungrad, 0,24mm, 1.2 bis 1.6, von Bj. 02/66 bis 04/79
Spacer for flywheel, 0.25mm, for Type 1 & Type 3 engines (from 04/66)
fits for Beetle, Karmann Ghia, Type 147 (from engine no. D 0 076 332, E 0 004 201, F 0 741 385 & engine codes H, L, B, AB, AC, AD, AE, AF, AH, AR, AS & AJ) Bus T1 (from engine no. H 0 140 93 Bus T2 Bus T3 (engine codes CT & CZ) Type 3...
Order number: 105 113 281 A
€2.24 *
Prices incl. 19% VAT plus shipping costs
in stock
Abstandring für Schwungrad, 0,24mm, 1.2 bis 1.6, von Bj. 02/66 bis 04/79
Spacer for flywheel, 0.30mm, for Type 1 & Type 3 engines (from 04/66)
fits for Beetle, Karmann Ghia, Type 147 (from engine no. D 0 076 332, E 0 004 201, F 0 741 385 & engine codes H, L, B, AB, AC, AD, AE, AF, AH, AR, AS & AJ) Bus T1 (from engine no. H 0 140 93 Bus T2 Bus T3 (engine codes CT & CZ) Type 3...
Order number: 105 113 283 A
€2.02 *
Prices incl. 19% VAT plus shipping costs
in stock
Abstandring für Schwungrad, 0,24mm, 1.2 bis 1.6, von Bj. 02/66 bis 04/79
Spacer for flywheel, 0.34mm, fits Type 1 & Type 3 engines (from 04/66)
fits for Beetle, Karmann Ghia, Type 147 (from engine no. D 0 076 332, E 0 004 201, F 0 741 385 & engine code H, L, B, AB, AC, AD, AE, AF, AH, AR, AS & AJ) Bus T1 (from engine no. H 0 140 93 Bus T2 Bus T3 (engine codes CT & CZ) Type 3...
Order number: 105 113 287 A
€2.81 *
Prices incl. 19% VAT plus shipping costs
in stock
Abstandring für Schwungrad, 0,24mm, 1.2 bis 1.6, von Bj. 02/66 bis 04/79
Spacer ring for flywheel, 0.32mm, 1.2 to 1.6
fit for models 1.2-1.6 built in 02/66-04/79
Order number: 105 113 285 A
€3.62 *
Prices incl. 19% VAT plus shipping costs
in stock
Abstandring für Schwungrad, 0,24mm, 1.2 bis 1.6, von Bj. 02/66 bis 04/79
Spacer ring for flywheel, 0.36mm, 1.2 to 1.6
fit for models 1.2-1.6 built in 02/66-04/79
Order number: 105 113 289 A
€2.81 *
Prices incl. 19% VAT plus shipping costs
in stock
Abstandring für Schwungrad, 0,24mm, 1.2 bis 1.6, von Bj. 02/66 bis 04/79
Spacer ring for flywheel, 0.38mm, 1.2 to 1.6
fit for models 1.2-1.6 built in 02/66-04/79
Order number: 105 113 291 A
€8.98 *
Prices incl. 19% VAT plus shipping costs
Viewed