Bus T1 - electrical

Novelties
No results were found for the filter!
in stock
108mm Dynamo/Alternator Top Pulley “C” Spanner
This “C” Spanner has been made to fit top pulleys with a diameter of 108mm , hooks into the notch on the rear of the pulley and holds it firm while the nut is undone or tightened up .
123 ignition with vacuum-advance
Intended for standard ex-factory engines which always feature a vacuum for acceleration. Many replaced their standard power Distributor by a Distributor without vacuum advance, a wrong decision. The ignition timing is withdrawn than...
in stock
123 ignition without vacuum advance for carburetor engines
1-2-3 ignition distributor without vacuum connection , contactless for Type 1 engine in Beetle, Bus, Thing, Fridolin, Type 3 and Karmann Ghia, except 25 and 30 hp engines. This ignition distributor no longer wears out, the adjustment of...
123 TUNE ignition for carburetor engines
suitable for: all 1.2-1.6 engines (except 25-30 HP) T3 CT / CZ / CU and all Type 4 engines not suitable for injectors maintenance-free technology, particularly suitable for modified engines
in stock
12V flasher and hazard warning relay, 4 x 21W, fits from 08/68
manufacturer STRIEBEL fits for Beetle (VIN 119 000 001 to 111 2799 842) Karmann Ghia, type 14 (VIN 149 000 001 to 141 3200 000) Type 181 Type 3 (VIN 319 000 001 to 310 2500 000) Karmann Ghia, type 34 (from VIN 349 000 001) Type 4 (until...
in stock
12V flasher and hazard warning relay, 4 x 21W, fits various models
fits for Beetle (VIN 119 000 001 to 111 2799 842) Karmann Ghia, type 14 (VIN 149 000 001 to 141 3200 000) Type 181 Type 3 (VIN 319 000 001 to 310 2500 000) Karmann Ghia, type 34 (from VIN 349 000 001) Type 4 (until VIN 410 2100 000) K70...
in stock
12V flasher and hazard warning relay, 4 x 21W, fits various models
fits for Beetle (VIN 119 000 001 to 111 2799 842) Karmann Ghia, type 14 (VIN 149 000 001 to 141 3200 000) Type 181 Type 3 (VIN 319 000 001 to 310 2500 000) Karmann Ghia, type 34 (from VIN 349 000 001) Type 4 (until VIN 410 2100 000) K70...
in stock
12V Flasher Relay 2 x 18 Watt, fit for 08/62-07/67
für Fahrzeuge mit 12V-Anlage (M 610 oder M 620) passend für Käfer (bis FIN 116 1021 300) Karmann Ghia (bis FIN 146 1021 300) Bus T1 (bis FIN 216 190 000) Bei allen ist bis 07/65 eine Masseleitung 211 971 119 A mitzuverwenden!...
in stock
in stock
36mm and 21mm Dynamo Pulley Nut Spanner
36mm an einem Ende und 21mm am anderen Ende (21mm ist für die späteren Lichtmaschinen Muttern) Lüfterriemenscheibenschlüssel, viel kleiner und leichter als ein 36-mm-Schlüssels in voller Größe. Dieser Schlüssel ist aus einem robusten...
in stock
52mm Tachometer gauge
Tachometer with classic look. Fits into any 52mm opening. Black dial with lighting. 12V. Fits for 4 cylinders, but can also be switched to 6 or 8. Incl. Installation instructions.
in stock
6 Volt alternator, 90 mm diameter, overhaul in exchange, old part delivery after receipt of the product
Please indicate to us when placing your order, if you need an alternator with tapped holes for mounting the controller!
6 Volt Relais für Abblendlicht, passend bis 07/67
6 V, 2 x 100 W Original-Ersatzteil, gebraucht Hersteller SWF nur wenige vorhanden
in stock
6 Volt Relais für Abblendlicht, passend bis 07/67
6 V, 2 x 100 W Original-Ersatzteil, gebraucht Hersteller Stribel Einzelstück
in stock
6 Volt relay for low beam and headlight flasher, fits various models (09/57 to 07/71)
fits for Beetle export (VIN 116 000 001 to 117 999 000) Beetle convertible (VIN 156 000 001 to 157 999 000) Beetle standard (VIN 118 000 001 to 111 2799 842) Karmann Ghia (VIN 1 649 253 to 147 999 000) Bus T1 (VIN 216 000 001 to 216 190...
in stock
6-way fuse box, fit for -01/54
passend für Käfer bis Baujahr 1953 Bus T1 bis Baujahr 1960 / Fahrgestellnummer 569928
in stock
6V Bilux Bulb 40/45W
Karmann, Bus, please indicate how many watts the bulb has got or where the bulb is used for.
in stock
6V flasher unit, (2 +1) x 18W
manufacturer SWF for trailer operation original spare part, NOS spare part number for comparison 261 953 187 B
in stock
6V H4 Halogen Lampe mit Bilux Sockel
Bilux Sockel Halogen Lampe 55/60Watt 6 Volt Version Stückpreis Nicht im Geltungsbereich der StVZO zugelassen
in stock
6V Impulsgeber für Lichthupe, passend ab 08/59
zum Nachrüsten der Lichthupe Original-Ersatzteil, gebraucht Hersteller SWF Einzelstück
in stock
6V relay, fits Bus T1 & Type 34
fits for Bus T1 (USA/CAN, as warning light relay) Type 34 (as fog light relay) original spare part, used few available
in stock
6V relay, fits Bus T1 & Type 34
fits for Bus T1 (USA/CAN, as warning light relay) Type 34 (as fog light relay) original spare part, NOS few available
in stock
95mm Dynamo/Alternator Top Pulley “C” Spanner
This “C” Spanner has been made to fit top pulleys with a diameter of 95mm , hooks into the notch on the rear of the pulley and holds it firm while the nut is undone or tightened up .
in stock
99mm Dynamo/Alternator Top Pulley “C” Spanner
This “C” Spanner has been made to fit top pulleys with a diameter of 99mm , hooks into the notch on the rear of the pulley and holds it firm while the nut is undone or tightened up .
AC motor with 3 connector, for external control, overhaul in exchange, old part delivery after receipt of the product
The old deposit of 50.00 EUR is included in the purchase price and will be refunded upon exchangeable old part.
Accessory for gauges in DIN radio bay
Metal black Fastening by clips Fits for up to 3 gauges with a diameter of 52mm
Additional light with switch, olive green, fits various models
manufacturer HELLA OEM, NOS mounting via knurled nut long power cable with plug
in stock
Alternator conversion kit, fits for Beetle, Bus T1
this kit includes; alternator with built-in voltage regulator alternator bracket tie-down strap set of three backing plates fits for: Beetle, except 25+ 30 hp The pulley 903 111 109 A suitable for 105 mm alternators is also required
Alternator/dynamo back plate set
fits for 34 to 50hp type 1 engines for alternator or dynamo with 105mm diameter consisting of inner and outer plate for fan housing and stiffening flange spare part numbers for comparison 131 119 259, 131 119 261 & 131 119 271
in stock
Anker für 6V Wischermotor auf 12V Umbau, nur für SWF
für Modelle Käfer Bj. 58-66 und Bus T1 Bj. 55-64 geeignet für 6V SWF Wischermotor (12,5 mm)
in stock
Armature for starter motor, fits various models (08/59 to 07/66)
for 6V starter 111 911 021 D & 113 911 021 A fits for Beetle (VIN 2 528 668 to 116 1021 300) Karmann Ghia, type 14 (VIN 2 528 668 up to 146 1021 300) Type 147 (up to VIN 146 1021 000) Bus T1 (VIN 580 202 to 215 036 651) original spare...
in stock
Armature for starter motor, fits various models (08/66 to 07/69)
for 12V starter 111 911 023 A fits for Beetle (VIN 118 000 001 to 119 1200 000) Karmann Ghia, type 14 (VIN 148 000 001 to 149 1200 000) Type 147 (VIN 148 000 001 to 149 1200 000) Bus T1 (engine no. H 0 183 373 to H 0 761 325) Bus T2 (up...
in stock
Ball bearing for dynamo, fits various types
fits for armature of all DC alternators two pieces required per dynamo
Ball bearings for alternator, fit for various types
passend für Anker aller Gleichstrom-Lichtmaschinen zwei Stück pro Lichtmaschine erforderlich
in stock
Ball joint for connecting rod, fits Bus T1 (until 07/64)
fits for Bus T1 (VIN 20 - 117 902 to 1 328 871) original spare part, NOS few available until 03/55 it can be used as replacement for 211 955 717 as well
in stock
Ball joint for wiper linkage, fits Bus T1 (03/55 to 07/63)
fits for Bus T1 (VIN 20 - 117 902 to 1 328 871) until 03/55 it can be used as replacement for 211 955 717 as well original spare part, NOS few available
in stock
Batterie 6Volt 66AH
Die Batterie im schwarzem Gehäuse ist trocken vorgeladen und wird unbefüllt geliefert! Oldie Look Für die Batterie wird 2,2 Liter Batteriesäure benötigt!
in stock
Viewed