Bus T1 - engine
Novelties
No results were found for the filter!
in stock
Paper gasket for flywheel, fits different models
fits for Bus T1 (34 hp from 11/64) Beetle (34 hp (from 08/66) Thing type 181 Bus T2 (1.6 engine) original spare part, NOS
in stock
in stock
Pilot shaft bearing
This bearing is located in the flywheel bolt of a type 1, type 3 and CT/CZ engine and in the crankshaft of a type 4, WBX and diesel engine. It is advisable to always replace this bearing when you are going to replace the clutch disc and...
in stock
in stock
Piston pin (oversize), for 25-, 30- & 34hp engine
marked green fits for: Beetle Karmann Ghia Type 147 Bus T1 original spare part, NOS limited quantity spare part number for comparison 111 107 431
in stock
Piston pin, for 25-, 30- & 34hp engine
fits for: Beetle Karmann Ghia Type 147 Bus T1 original spare part, NOS limited quantity spare part number for comparison 111 107 411
in stock
Piston ring 77.5mm (1st oversize), for 30 & 34hp engine
fits for: Beetle Karmann Ghia Type 147 Bus T1 original spare part, NOS limited quantity spare part number for comparison 111 107 365
in stock
Piston ring 77mm (standard size), for 30 & 34hp engine
fits for: Beetle Karmann Ghia Type 147 Bus T1 up to engine no. D 0 992 260 original spare part, NOS limited quantity spare part number for comparison 111 107 351 A
in stock
Piston ring 77mm, for 30 & 34hp engine
fits for: Beetle Karmann Ghia Type 147 Bus T1 original spare part, NOS limited quantity Spare part number for comparison 111 107 361 B
in stock
Piston ring 78mm (2nd oversize), for 30 & 34hp engine
fits for: Beetle Karmann Ghia Type 147 Bus T1 original spare part, NOS limited quantity spare part number for comparison 111 107 359 C
in stock
Piston ring 83 mm (normal size) 1500 cc
fits for: Bus T1 (up to engine no. 1 100 000) Type 3/34 (engine no. 255 340 to 1 100 000 and R) original spare part
in stock
Piston ring 86.5 mm (oversize) 1600 cc
fits for: Beetle (47, 48, 50 HP) Type 3/34 (engine code T) Type 181 (from enguine no. AG 0 000 001) Bus T2 original spare part
in stock
Piston Ring Set (for all 4 pistons) with oil control rings, 77mm 2 x 2 x 4 standard dimensions
for 1200 and 1300cc engines from D 0 992 261 engine code E, F, AB, AC & AR original part number is only used for comparison 111 198 157 B
in stock
Piston ring set (for all 4 pistons) with oil scraper rings, 77,5 mm, 2,5 x 2,5 x 4 mm
1st oversize for engines with increased oil consumption fits for: Type 1 engines 1200cc (30 and 34 hp) up to engine no. D 0 992 260 Specifications: Thickness upper compression ring: 2.50 mm Thickness lower compression ring: 2.50 mm...
in stock
Piston Ring Set, Cast Top Ring, 87 mm
Piston Ring Set 87 mm suitable for Karmann Ghia 01/70-07/74, 1.6 Bus T2 08/67-07/79, 1.6 Type 1 01/70-12/79, 1.6 181 Thing 08/70-02/79, 1.6
in stock
Piston Ring Set, Cast Top Ring, 92 mm
Piston Ring Set 92 mm suitable for 181 Thing 09/69-02/79, 1.5-1.6 Karmann Ghia 08/61-07/74, 1.3-1.6 Bus T2 08/67-07/79, 1.6 Type 1 01/65-07/75, 1.3 Type 1 04/70-12/79, 1.6
in stock
Piston Ring Set, Cast Top Ring, 94 mm
Piston Ring Set 94 mm suitable for Karmann Ghia 01/70-07/74, 1.6 Bus T2 08/67-07/79, 1.6 Type 1 01/70-12/79, 1.6
Piston ring top 83 mm (standard size) 1500 cc
fits for: Type 1/14 (up to engine no. H 1 350 000 & L 0 026 500) Bus T1 (from engine no. H 0 000 001) Type 3 (from engine no. K 0 000 001) original spare part
in stock
Piston ring top 83,5 mm (oversize) 1500 cc
fits for: Type 1/14 (up to engine no. H 1 350 000) Bus T1 (from engine no. H 0 000 001) Type 3 (from engine no. K 0 000 001) original spare part
in stock
Piston ring top 84 mm (oversize) 1500 cc
fits for: Type 1/14 (up to engine no. H 1 350 000) Bus T1 (from engine no. H 0 000 001) Type 3 (from engine no. K 0 000 001) original spare part
in stock
Piston ring, bottom 83.5 mm (oversize) 1500 cc
fits for: Type 1/14 (up to engine no. H 0 823 799 & L 0 014 400) Type 3 (engine no. K 0 000 001 bis K 0 078 229, M 0 000 001 bis M 0 000 749) original spare part
in stock
Piston ring, bottom 84 mm (oversize) 1500 cc
fits for: Type 1/14 (up to engine no. H 0 823 799 & L 0 014 400) Type 3 (engine no. K 0 000 001 bis K 0 078 229, M 0 000 001 bis M 0 000 749) original spare part
in stock
in stock
Piston Rod Bearing 18/22 kW (25/30 PS) 8 Piece 0,50
18-22 kW (25-30 PS) 0,50 mm suitable for Beetle Bus T1 Bus T2 Karmann Ghia Type 14 Karmann Ghia Type 34 181 Thing Type 3 Fridolin 147
in stock
in stock
in stock
Piston Rod Bearing 25-37 kW (34-50 PS) 1,2/1,6 + WBX 8 Piece
25-37 kW (34-50 PS) 1,2/1,6 WBX 8 Piece
in stock
Piston Rod Bearing 25-37 kW (34-50 PS) 1,2/1,6 + WBX, 8 Piece
25-37 kW (34-50 PS) 1,2/1,6 WBX 8 Piece
in stock
in stock
Pistons and Cylinder, not forged, 87 x 69, 1641 ccm
Alle Sätze bestehen aus 4 Zylindern, 4 Kolben mit Kolbenbolzen und Kolbenringen.
in stock
Pivot pin for clutch, fits various models
for the following clutches 111 141 025 C, 111 141 025 D, 111 141 025 F, 111 141 025 G, 111 141 025 H, 113 141 025, 113 141 025 A, 211 141 025 A, 211 141 025 C, 211 141 025 D, 311 141 025 & 311 141 025 B 3 pieces needed per vehicle...
Plug for camshaft in engine case 25/30HP DIN
Plug for camshaft in engine case 25/30HP DIN fits for: Beetle Karman Ghia Bus T1
in stock
Plug for throttle ring, suitable for type 1/14 & T1 (up to 07/64)
fits for: Beetle/Bug (up to engine no. 8 796 622) Karmann Ghia (up to engine no. 8 796 622) Bus T1 1.2 (up to engine no. 8 785 397) Bus T1 1.5 (up to engine no. 627 578) original spare part only few available
in stock
Plugs for OE fan shroud, 48 mm
Plugs for OE fan shroud 48 mm fits for 181 Thing 09/69-02/79, 1.5-1.6 Karmann Ghia 08/55- 07/74, 1.2-1.6 Bus T1 01/50-07/67, 1.2-1.5 Bus T2 08/67-07/79, 1.6 Type 1 12/47-12/85, 1.2-1.6
in stock
in stock
Pressure plate mounting kit, heavy duty, fits air-cooled engines
M8 x 20, property class 10.9, width across flats 13 fits for Beetle Karmann Ghia type 14 Type 147 Type 181 Bus T1 Bus T2 (not for 215mm clutch) Type 3 Karmann Ghia Type 34 Type 4
in stock
in stock
Pressure plate, 200 mm, suitable for models from year 08/70 and bus up to year 02/76
suitable for: Beetle Bus
in stock
Pulley for dynamo, for type 1 engines (08/60 to 07/66)
for 90mm dynamos fits for Beetle (from engine no. 3 912 904) Karmann Ghia (from engine no. 3 912 904) Type 147 (from engine no. 3 912 904) Bus T1 (engine no. 5 000 001 to 1 099 999) spare part numbers for comparison: 113 903 109 & 042...
in stock
Pulley shaft seal
This shaft seal was not originally installed and can be used if oil leaks from the pulley. In most cases, this can prevent complete disassembly of the engine and stop the oil loss.
in stock
Pulley shaft seal kit
This pulley shaft seal kit was not originally installed and can be used if oil leaks from the pulley. In most cases, this will prevent the engine from being completely disassembled and stop the oil leakage. This kit is consisting of...
in stock
in stock
Pulley, aluminium, fit for Typ 1
passend für Typ 1 Motoren Käfer Karmann Ghia Bus T1 Bus T2 Kübelwagen 181 Durchmesser 170mm Gradeinteilung mit schwarzen Ziffern
in stock
Push rod of fuel pump, fits type 1 engine (06/59 to 07/80)
length 108mm made in Germany fits for Beetle (from 34HP) Karmann Ghia (from 34HP) Type 147 (from 34HP) Bus T1 (from engine no. 3 400 000) Bus T2 (up to VIN 211 2300 000) Type 3 Type 34 Typ 181
in stock
Push rod of fuel pump, fits type 1 engines (from 08/73)
length 100mm for vehicles with alternator fits for Beetle Karmann Ghia Type 147 Bus T2 (from VIN 212 000 001)
Push rod tube set, with seals
Push rod tube set with seals aluminium Set of 8 leak-proof fits for 181 Thing 09/69-02/79, 1.5-1.6 Karmann Ghia 08/65-07/74, 1.5-1.6 Bus T1 08/65-07/67, 1.5 Bus T2 08/67-07/79, 1.3-1.6 Type 1 08/65-12/79, 1.3-1.6 Type 3 08/65-07/73,...
in stock
Viewed