Bus T1
Novelties
No results were found for the filter!
in stock
Stoßstangenhorn hinten links, passend für Bus T1 von 08/58 bis 07/67, Exportstoßstange US-Modell
Passend für Bus T1 08/58 bis 07/67 Exportstoßstange US-Modell
in stock
Stoßstangenhorn hinten rechts, passend für Bus T1 von 08/58 bis 07/67, Exportstoßstange US-Modell
Passend für Bus T1 08/58 bis 07/67 Exportstoßstange US-Modell
Stoßstangenhorn vorne rechts oder links
Passend für Bus T1 von 08/58 bis 07/67 Exportstoßstange US-Modell
in stock
in stock
Strainer for fuel tap with knurled nut, fits Beetle, Bus T1
fits for fuel tap 6 u. 8 mm with knurled nut Beetle (until approx. 03/53) Bus T1 (until approx. 54 ) Kübel Type 82 Schwimmwagen Type 166 original spare part, NOS few available
NEW
in stock
Strainer for fuel tap, fits various models (up to 07/55)
for fuel tap with wing nut fits for Beetle (up to VIN 1 - 929 745) Bus T1 (up to VIN 20 - 117 901) good reproduction
Streuscheibe (klar) für Scheinwerfer, HELLA-Style
154x86mm passend für verschiedene Scheinwerfer z.B. HELLA Nebelscheinwerfer 145 ZNXCC
in stock
striker plate for sliding door, T1 & Typ 147
fits for T1 Type 147 for central lock original spare part only few left
striker plate for sliding door, used, T1 & Typ 147
fits for T1 Type 147 for central lock original spare part used, good condition single item
Striker plate left on lock column, fits Bus T1 (12/63 to 07/66)
fits for Bus T1 (VIN 1 222 026 to 216 190 000) original spare part, NOS few available
in stock
Striker plate left, fits various models
fits for Bus T1 (from FIN 217 000 001) Bus T2 Type 181 Bus T3 (for side flap) LT 1st generation
in stock
Striker plate on lock column, fits Bus T1 (until 12/63)
fits for Bus T1 (up to VIN 1 222 025) left and right
in stock
striker plate sliding door left, T1 & Type 147
fits for T1 Type 147 for central lock original spare part single item
in stock
Stud bolt, fits bus T1
M10x32 fits for Bus T1 with 1500ccm Bus T1 (from VIN 1 144 282) original spare part, NOS few available
in stock
Stud for rocker shaft (03/64 bis 09/64)
12,5x22 fits for 34hp (from engine no 8 435 054) 42hp (engine no 455 625 to 710 799) original spare part, NOS limited quantity
in stock
Stud for rocker shaft (05/60 to 07/61)
11,5mm fits for 34hp (up to engine no 5 979 933) original spare part, NOS limited quantity
in stock
Stud for rocker shaft (08/61 bis 03/64)
12,5x11 fits for 34hp (engine no 5 979 934 to 8 435 053) 42hp (up to engine no 455 624) original spare part, NOS limited quantity
in stock
Stud, Wheel, Screw In, M14, Length 40mm
Material: steel Thread: M14 * 1.5 Length: 40mm Diese Stehbolzen passen in Bremstrommeln oder -Scheiben mit M14-Aufnahmen für Radschrauben. In Verbindung mit der passenden Radmutter ergibt sich eine schicke Befestigung der Felge. Nebenbei...
in stock
Stützfeder für Motordeckel, passend für verschiedene Modelle (ab 12/63)
285mm, nicht mit Großraumpritsche! passend für Bus T1 (ab FIN 1 222 026) Bus T2 (bis FIN 211 2300 000) Bus T3 (als Ersatz für 245 827 401) Typ 147 als Stützfeder der Tresorklappe Bus T1 (ab FIN 1 222 026) Bus T2 Bus T3 (als Ersatz für...
in stock
Submersible pump luxury
With integrated check valve It prevents the water column in the hose or pump from falling off This means that the water flows immediately when the tap is turned on 15 l/min, 0.5 bar 10-20 Watt
in stock
Sump plate stud kit (6 pieces)
Scope of delivery 6 pieces see Fig. fit for all 1.2-1.6 (except 25 and 30 HP)
in stock
Sun Visors with Mounts, black, left/right, fits for Bus T1 08/58-07/67
Sun Visors with Mounts black left/right fits for: Bus T1, 08/58-07/67
sunroof clamp with locking bar (used), T1
fits for T1 used good condition incl. locking bar original spare part single item
Sunroof mechanism, fits for Bus T1
Folding roof mechanism fits for: Bus T1, 1951-1967 adjustable guide latch included are: locking latch incl. lock three guide bolts four tensioning latches screws rosette spring handle design corresponds to the model until 1964 (until FIN...
Support beam frame, under loadingbed, fits for Bus T1, Pritsche up to 07/67
fits for: Bus T1, Pritsche up to 07/67
in stock
Support for reversing lever, fits fully synchronized gearbox (from 08/60)
fits for: Beetle (from VIN 3 192 506) Bus T1 (from VIN 469 506) Karmann Ghia (from VIN 3 192 506) Type 147 "Fridolin" Type 3 Type 34 Type 181 "Thing" LT 1st generation original spare part, NOS limited quantity
in stock
support for sliding door left, complete, T1 & Type 147
fits for: T1 Type 147 for sliding door hinge incl. roller and locking levers minor storage traces original spare part reference number: 214 843 339 single item
in stock
support for sliding door left, T1 & Type 147
fits for: T1 Type 147 for sliding door hinge original spare part reference number: 214 843 339 single item
Viewed