Bus T1
Novelties
No results were found for the filter!
in stock
6V Impulsgeber für Lichthupe, passend ab 08/59
zum Nachrüsten der Lichthupe Original-Ersatzteil, gebraucht Hersteller SWF Einzelstück
in stock
6V relay, fits Bus T1 & Type 34
fits for Bus T1 (USA/CAN, as warning light relay) Type 34 (as fog light relay) original spare part, used few available
in stock
6V relay, fits Bus T1 & Type 34
fits for Bus T1 (USA/CAN, as warning light relay) Type 34 (as fog light relay) original spare part, NOS few available
in stock
in stock
in stock
in stock
in stock
in stock
95mm Dynamo/Alternator Top Pulley “C” Spanner
This “C” Spanner has been made to fit top pulleys with a diameter of 95mm, hooks into the notch on the rear of the pulley and holds it firm while the nut is undone or tightened up.
in stock
99mm Dynamo/Alternator Top Pulley “C” Spanner
This “C” Spanner has been made to fit top pulleys with a diameter of 99mm, hooks into the notch on the rear of the pulley and holds it firm while the nut is undone or tightened up.
in stock
in stock
in stock
A Post valance bracket, left, fit for Bus T1
The A post valance bracket bridges between the A post and the end of the inner front valance, and also closes off the bottom of the A post. Normally required if replacing either the inner front valance or the A post are being replaced.
in stock
A Post valance bracket, right, fit for Bus T1
The A post valance bracket bridges between the A post and the end of the inner front valance, and also closes off the bottom of the A post. Normally required if replacing either the inner front valance or the A post are being replaced.
in stock
in stock
in stock
A-post lower repair panel, left, with hinge bracket, fits bus T1 up to year 1967
A-Post lower repair panel with hinge bracket With inner stiffening parts Laser cut, CNC formed and machine pressed for consistent accuracy Exanct copy of the original part in highest quality 250mm high panel
in stock
A-post lower repair panel, right, with hinge bracket, fits bus T1 up to year 1967
A-Post lower repair panel with hinge bracket With inner stiffening parts Laser cut, CNC formed and machine pressed for consistent accuracy Exanct copy of the original part in highest quality 250mm high panel
in stock
Abdeckblech für Kraftstoffpumpe, passend für 25 & 30 PS Motoren
passend für 25 & 30 PS Motoren bis Motornr.: 3 949 222 original-Ersatzteil, NOS wenige verfügbar
in stock
Abdeckblech für untere Riemenscheibe, gebraucht
passend für Original-Ersatzteil, gebraucht wenige vorhanden Ersatzteilenummern zum Vergleich 111 119 551 B
in stock
Abdeckblech für untere Riemenscheibe, gebraucht, passend für Modelle von 1963-67
passend für Käfer Bus T 1 34-,42-,44 PS original-Ersatzteil, gebraucht
Abdeckblech für untere Riemenscheibe, passend für 30 PS
passend für Käfer Karmann Ghia Bus T1 Original-Ersatzteil, NOS
in stock
Abdeckung / Gummi für Dachausschnitt Westfalia T1
Dieses Gummi läuft um den Dachausschnitt grau Original Qualität passend für Bus T1 Westfalia Baujahr 1964-67
in stock
Abdeckung für Innenleuchte, Westfalia T1 SO 42
Abdeckung für Lampe passend für Bus T1 Westfalia SO-42
Abgaskrümmer mit Vergaservorwärmung für Vintage Speed Auspuffanlage, passend für Bus T1 (bis 07/67)
passend für Bus T1 mit Vintage Speed Edelstahlauspuffanlage mit versteckten Endrohr
in stock
in stock
Abstreifring, passend für Bus T1 (bis 03/55)
passend für Bus T1 (bis FIN 1 144 281) Original Ersatzteil, NOS begrenzte Stückzahl pro Fahrzeug werden 2 Stück benötigt Ersatzteilnummer zum Vergleich: 211 405 649
AC motor with 3 connector, for external control, overhaul in exchange, old part delivery after receipt of the product
The old deposit of 50.00 EUR is included in the purchase price and will be refunded upon exchangeable old part.
in stock
in stock
in stock
Accelerator pedal, fits Bus T1 (from 03/55)
fits for Bus T1 LHD (from VIN 20 - 117 902) Brasil T1 LHD
in stock
Accelerator pedal, fits Bus T1 (from 03/55) & T2 (till 07/72)
fits for Bus T1 RHD (from VIN 20 - 117 902) Bus T2 (up to 212 2300 000)
in stock
Accelerator pushrod boot, fits Bus T1 (from 03/55) & T2 (until 07/72)
fits for Bus T1 (from VIN 20 - 117 902) Brasil T1 Bus T2 (until VIN 212 2300 000)
in stock
Accelerator-cable guide tube/fan shroud, -12.65
Beetle, Karmann Ghia 1.2-.1.3 08/60 - 12/65 Bus T1 1.2 08/59 - 10/64 Bus T1 1.5 01/63 - 10/64
in stock
Accessory for gauges in DIN radio bay
Metal black Fastening by clips Fits for up to 3 gauges with a diameter of 52mm
in stock
Actuating rod of the left junction box, for type 1 engines (04/59 to 12/62)
for 30 & 34hp engines fits for Beetle (from engine no. 2 939 201 to 3 949 223 & 7 336 420) Karmann Ghia (from engine no. 2 939 201 to 3 949 222 & 7 336 419) Bus T1 (from engine no. 2 939 201 to 7 336 419) original spare part, NOS limited...
in stock
Adapter ring for two-circuit main brake cylinder for bus up to 07/67 with mounting parts
Fits for Varga main brake cylinder
in stock
Adapting seal kit for oil cooler, fits type 1 & type 3 engines
for the installation of oil coolers from 08/69 in engines up to 07/69 oil coolers up to 07/69 in engines from 08/69 onwards kit consisting of 2x sealing ring 8mm/10mm 3x washer
Additional light with switch, olive green, fits various models
manufacturer HELLA OEM, NOS mounting via knurled nut long power cable with plug
in stock
Additional step at entrance, front right/left, fits for Bus T1 up to 07/67
Additional step at entrance front right/left fits for: Bus T1, until 07/67 holder galvanized
in stock
Adjusting nut for pivot pin, fits various models
for the following clutches 211 141 025, 211 141 025 A, 211 141 025 B, 211 141 025 C, 211 141 025 D, 311 141 025, 311 141 025 B & 311 141 025 D 3 pieces are needed per vehicle installed in Beetle Karmann Ghia Bus T1 Type 3 Type 34 Type...
in stock
Adjusting nut M7 for clutch cable, fits various models (up to 04/65)
fits for: Beetle (up to VIN 115 685 586) Karmann Ghia (up to VIN 145 685 586) Type 147 "Fridolin" (up to VIN 145 685 586) Type 3 (up to VIN 315 158 979) Type 34 (up to VIN 345 158 979) Bus T1 (up to VIN 215 134 682) Brazil T1 (up to VIN...
in stock
Adjusting nut of the pivot bolt, for various models (from 07/62)
for clutch (200mm) 211 141 025 B, 311 141 025 D & (215mm) 043 141 025 A fits for Beetle (engine code: L, H & B) Karmann Ghia (engine code: L, H & B) Bus T1 (from engine no. 6 908 639) Type 181 Bus T2 (1300 & 1600cc) original spare part,...
Viewed