181 Thing - rear axle
Novelties
No results were found for the filter!
in stock
1.) Mount, Block Rear Anti Roll, fit for models from year 08/66
passend für Hinterachse ab 08/66 mit Ausgleichsfeder bei Pendelachse
Adjustable spring plates (Per Pair) 553 mm
This adjustable torsion bar Swords enable raising or lowering by 40mm by simply adjusting the adjusting screw which is accessible even with mounted wheel. A must for drag racing cars to make fine adjustments on the circuit can, however,...
Adjustable spring plates (Per Pair) 553 mm
This adjustable torsion bar Swords enable raising or lowering by 40mm by simply adjusting the adjusting screw which is accessible even with mounted wheel. A must for drag racing cars to make fine adjustments on the circuit can, however,...
in stock
Adjustable spring plates (Per Pair) 627 mm
This adjustable torsion bar Swords enable raising or lowering by 40mm by simply adjusting the adjusting screw which is accessible even with mounted wheel. A must for drag racing cars to make fine adjustments on the circuit can, however,...
Adjustable spring plates (Per Pair) 675 mm
This adjustable torsion bar Swords enable raising or lowering by 40mm by simply adjusting the adjusting screw which is accessible even with mounted wheel. A must for drag racing cars to make fine adjustments on the circuit can, however,...
in stock
Anschlagstütze auf Hinterachsrohr, passend für Bus T1 & Typ 181
passend für Bus T1 (1500 & ab FIN 215 036 651) Typ 181 (mit Pendelachse, bis FIN 183 2346 524) Original-Ersatzteil, NOS mit Lagerspuren wenige verfügbar
in stock
Axle journal, semi-trailing arm
fit for the following vehicles with semi-trailing arm rear axle Beetle Karmann Ghia Type 14 Type 3 Bus T1 -67 converted to semi-trailing arm rear axle Originalpartnumber is only used for comparison 113 501 231
Axle Seal closed, fits for Beetle + Typ 3 + Karmann Ghia + Bus T1
closed axle boot fits for: Beetle Typ 3, 1500/1600 Karmann Ghia Typ 14 Karmann Ghia Typ 34 Bus T1
in stock
Bolt for shock absorber, fits various models (08/62 to 02/73)
as upper fixing at the front axle fits for Bus T1 (from VIN 971 550) Bus T2 (up to VIN 219 300 000) as upper fixing at the swing axle fits for Type 181 (up to VIN 183 2346 524) original spare parts, NOS few available
in stock
Buffer support on rear axle tube, fits Bus T1 & Type 181
fits for Bus T1 (1500 & from VIN 215 036 651) Type 181 (with swing axle, up to VIN 183 2346 524)
Bump Stop Bracket, right, fit from 07/58
passend für Käfer 1,2-1,6 08/59-12/86 Karmann Ghia 1,2-1,6 08/59-07/86 Typ3 1,5-1,6 04/61-07/73
in stock
Bush Torsion Bar inner right, fit for all models from year 08/59-
fit for Beetle Karmann Ghia Type 3 Porsche 356
in stock
Bush Torsion Bar left inner, fit for all models from year 08/59-
fit from 08/59-07/68 left inside and right outside and from 08/68 all models left inside Beetle Karmann Ghia Type 3 Porsche 356
in stock
Cap screw, M8x48, for constant velocity joint (24 pieces recommended)
fits for: Golf/Jetta, 1.1-1.8 (incl. D), 02/74-02/84 Golf/Jetta, 1.0-1.8 (incl. D), 08/83-12/92 Bus T3, 1.6-2.1 (incl. D), 05/79-07/92 Porsche 914, 1.7-2.0, 01/69-02/76
in stock
Castle nut M 24 x 1.5, fit for different models up to 07/66
wrench size 36 mm fits for Type 1 & Type 14 (up to 07/66) Bus T1 (1200 up to 07/63)
in stock
Castle nut M24 x 1.5, fit for different Models from 09/61
wrench size 36 mm fits for Type 3 Type 34 Bus T1 (1500, up to 07/63) Type 147 Type 181 Type 1 & Type 14 (from 08/66)
in stock
Cover plates, swing axle
dieser Deckel entspricht dem original Teil original Teile Nummer dient nur zum Vergleich 111 511 255 C
in stock
CV boot with assembly items and grease
mit Schmierfett MOS2 und Befestigungsmaterial passend für 1302, 1303 und Automatik Käfer, Karmann Ghia und Typ 3 mit Schräglenkergetriebe oder Automatik original Qualität Hersteller Febi-Bilstein
CV joint axle kit, rear, complete, fits for 181
CV joint axle kit rear complete 16 1/8" for I.R.S. fits for: 181, 1.6, 08/72-07/74 Length: 410 mm
in stock
Dichtring am Radlager der Pendelachse, passend für verschiedene Modelle
25,5x2,6mm passend für Käfer Karmann Ghia Typ 147 "Fridolin" Bus T1 Typ 3 Typ 34 Typ 181 "Kübel" (bis FIN 183 2346 524) als Dichtring des Wasserablaufschlauchs der Frischluftregulierung Bus T2 als Dichtring am automatischen Trittbrett...
in stock
Druckring für Ausgleichsgetriebe, 3,8 mm
passend für Käfer (außer 1302/03) Karmann Ghia Typ 14 Bus T1 Fridolin Typ 147 Typ 181 Typ 3/34 (bis 08/68 - Fahrgest.-Nr. 318 500 000) Original-Ersatzteil, NOS wenige verfügbar
in stock
Federscheibe für verschiedene Befestigungen bei Fahrzeugen mit Schräglenkerachse
12 x 24 passend für u.a. Befestigung der Hinterachsstrebe Bus T2 Befestigung der Federstrebe Käfer Karmann Ghia Typ 14 & Typ 34 Typ 181 Typ 3 Original-Ersatzteil, NOS begrenzte Stückzahl
in stock
Guide for push rod, left side, fits for models from 08/66
fits for: Käfer ( from FIN 117 000 001) Karmann Ghia Typ 14 (from FIN 148 000 001)
in stock
Gummilagersatz für einen Schräglenker (Silent Block)
Einbauseite: hinten pro Schräglenker 2 Stück verbaut
in stock
Handbrake cable clip (per pair) for IRS axle
fits for Beetle Karmann Ghia, type 14 Type 3 Karmann Ghia, type 34 Type 181 Bus T3 (until 07/84) spare part numbers for comparison 113 501 595 & 251 501 595 A
in stock
Hexagon bolt M 10 x 18, 10 K, fits different models (05/59 to 08/65)
for ring gear mounting fits for Beetle with fully synchnonized gear box (from VIN 3 192 507) Karmann Ghia Type 14 (from VIN 3 192 507) Bus T1 (from VIN 469 505 until 216 028 431) Type 3 (up to VIN 316 042 518) Type 34 (up to VIN 346 042...
Left semi-trailing arm bead-blasted and high-gloss powder coated
Left trailing arm used but sandblasted and primed, without bearings and bushings. When ordering, please note whether you need this article by Dec. or from Dec. 70, or whether the feather sword has the single or double attachment. Tip:...
Left-hand torsion bar, fits various models (up to 01/80)
length 626mm, Ø 24mm marked with two white colored rings fits for Type 3 squareback (up to FIN 366 500 000) Type 147 "Fridolin" Type 181 "Thing" original spare part, NOS limited quantity
in stock
Outer rubber bearing for torsion bar, fits various models (from 08/59)
fits for Beetle (from VIN 118 071 440 (automatic gear) or VIN 119 00 001 (manual gear)) Karmann Ghia (from VIN 148 071 440 (automatic gear) or VIN 149 00 001 (manual gear)) Type 3 (from VIN 318 015 226 (automatic gear) or VIN 319 00 001...
NEW
in stock
Outer spacer ring for rear wheel bearing of the double articulated axle
fits for Beetle, Karmann Ghia, Type 3 & Type 181 "Thing"
in stock
Pair of urethan torsion bar bearings, fits various models (from 08/59)
45mm inner diameter fits for inner right & outer left Beetle (VIN 2 528 668 to 118 1016 100) Karmann Ghia (VIN 2 528 668 to 148 1016 100) Type 3 (up to VIN 318 500 000) Typ 34 (up to VIN 348 500 000) Typ 147 (up to VIN 148 1016 100)...
in stock
Pair of urethan torsion bar bearings, fits various models (from 08/59)
48mm inner diameter fits for outer right & inner left Beetle (VIN 2 528 668 to 118 1016 100) Karmann Ghia (VIN 2 528 668 to 148 1016 100) Type 3 (up to VIN 318 500 000) Typ 34 (up to VIN 348 500 000) Typ 147 (up to VIN 148 1016 100)...
in stock
Pair of urethane torsion bar bearings, fits various models
inner diameter 2" (50.8mm) fits Beetle, Karmann Ghia, Type 3, Type 147....
Viewed