181 Thing - Engine
Novelties
No results were found for the filter!
in stock
123 ignition with vacuum-advance
Intended for standard ex-factory engines which always feature a vacuum for acceleration. Many replaced their standard power Distributor by a Distributor without vacuum advance, a wrong decision. The ignition timing is withdrawn than...
in stock
123 ignition without vacuum advance for carburetor engines
1-2-3 ignition distributor without vacuum connection , contactless for Type 1 engine in Beetle, Bus, Thing, Fridolin, Type 3 and Karmann Ghia, except 25 and 30 hp engines. This ignition distributor no longer wears out, the adjustment of...
in stock
123 TUNE ignition for carburetor engines
suitable for: all 1.2-1.6 engines (except 25-30 HP) T3 CT / CZ / CU and all Type 4 engines not suitable for injectors maintenance-free technology, particularly suitable for modified engines
in stock
4 pcs. Set of clamps for intake manifold gaskets (129 111 701 B)
passend für 1,6l (MKB AD, AE, AF, AH, AL, CT & CZ) 47mm & 40mm
69 mm Counter-weighted crankshaft, 4140 Chromoly
69 mm Counter-weighted crankshaft 4140 Chromoly fits for 181 Thing 09/69-02/79, 1.5-1.6 Karmann Ghia 08/66-12/76, 1.3-1.6 Bus T1 08/63-07/67, 1.5 Bus T2 08/67-07/71, 1.6 Type1 incl. 1302/1303 08/65-03/81, 1.3-1.6 Type3 08/65-07/73, 1.5-1.6
in stock
Abdeckblech für untere Riemenscheibe, gebraucht, passend für Modelle ab 07/67
passend für Käfer, Karmann Ghia (Motor-Nr. ab E 0 020 022, ab F 1 778 164, ab H 0 874 200, ab L 0 019 337, ab B 6 000 001, AB, AC, AD, AE AF & AH) Typ 181 Bus T2 (Motor-Kennbuchstabe B, C, AF, AB, AD, AE) Original-Ersatzteil, gebraucht...
in stock
Abdeckblech für untere Riemenscheibe, gebraucht, passend für Modelle von 1963-67
passend für Käfer Bus T 1 34-,42-,44 PS original-Ersatzteil, gebraucht
in stock
Adapting seal kit for oil cooler, fits type 1 & type 3 engines
for the installation of oil coolers from 08/69 in engines up to 07/69 oil coolers up to 07/69 in engines from 08/69 onwards kit consisting of 2x sealing ring 8mm/10mm 3x washer
Additional idle jet 45, for Solex carburetor 31 PICT-3 (08/63 to 07/73)
for carburetors 31 PICT-3, 31 PICT-5, 32/35 TDID, 32/35 DIDTA & 34 PICT-5 fits for Beetle (engine no. AC 0 000 001 to AC 0 006 959 and AB 0 000 001 to AB 0 754 555) Karmann Ghia (engine no. AC 0 002 630 to AC 0 008 519 & AR 0 000 001 to...
in stock
Adjusting nut for pivot pin, fits various models
for the following clutches 211 141 025, 211 141 025 A, 211 141 025 B, 211 141 025 C, 211 141 025 D, 311 141 025, 311 141 025 B & 311 141 025 D 3 pieces are needed per vehicle installed in Beetle Karmann Ghia Bus T1 Type 3 Type 34 Type...
in stock
Adjusting nut of the pivot bolt, for various models (from 07/62)
for clutch (200mm) 211 141 025 B, 311 141 025 D & (215mm) 043 141 025 A fits for Beetle (engine code: L, H & B) Karmann Ghia (engine code: L, H & B) Bus T1 (from engine no. 6 908 639) Type 181 Bus T2 (1300 & 1600cc) original spare part,...
in stock
Air baffle bottom left, galvanized, top quality, fit for 25 kW (34 HP)
This galvanized air baffle for the tappet protection tubes has the nuts and mounting holes in the right place. No rework is necessary like with inexpensive repros.
in stock
Air baffle bottom left, galvanized, top quality, fits 29-37 kW (40-50 hp)
This galvanized air baffle for the pushrod protection tubes has the nuts and mounting holes in place. No rework is necessary as with the inexpensive repros.
in stock
Air baffle bottom, front right, galvanized, top quality, 25 kW (34 hp)
This galvanized air baffle for the pushrod protection tubes has the nuts and mounting holes in place. No rework is necessary as with the inexpensive repros.
in stock
Air baffle bottom, front right, galvanized, top quality, 29-37 kW (40-50 hp).
This galvanized air baffle for the pushrod protection tubes has the nuts and mounting holes in place. No rework is necessary as with the inexpensive repros.
in stock
Air baffle bottom, right rear, galvanized, top quality, 25 kW (34 hp)
This galvanized air baffle for the pushrod protection tubes has the nuts and mounting holes in place. No rework is necessary as with the inexpensive repros.
in stock
Air baffle bottom, right rear, galvanized, top quality, 29-37 kW (40-50 hp).
This galvanized air baffle for the pushrod protection tubes has the nuts and mounting holes in place. No rework is necessary as with the inexpensive repros.
Air guide plate rear right, fits 1.3 to 1.6 (from 08/67)
fits for 1.3 to 1.6 engines from 08/67 Beetle Bus T2 Thing 181 Karman Ghia Type 14
in stock
Alternator/dynamo back plate set
fits for 34 to 50hp type 1 engines for alternator or dynamo with 105mm diameter consisting of inner and outer plate for fan housing and stiffening flange spare part numbers for comparison 131 119 259, 131 119 261 & 131 119 271
Alu-Valve covers with ventilation , Evolution Type 1
German Product fits all Typ 1 engines except 24,5-30 HP
in stock
Aluminum oil cooler, standard
suitable for: Beetle, 1.6 year of construction 08/70 to 04/79 Bus T2, 1.6 from 08/70 to 07/71 Golf GTI, 1.6 + 1.8 GTI year 01/77 to 02/84 Scirocco GTI, 1.6 + 1.8 from 01/77 to 10/83
Andrehklaue, passend für verschiedene Modelle
passend für Industriemotor Typ 122, 122/1, 122/2, 126 Typ 181 Kübelwagen Original-Ersatzteil, NOS Ausführung mit Loch durch Schaft 11,5 mm Ø Loch für die Kurbel 21 mm Ø Schaftlänge 25 mm M 20 Nut im Schaft gelb verzinkt wenige vorhanden...
Ausrückwelle, passend für verschiedene Modelle (08/70 bis 09/71)
passend für Käfer (FIN 111 2000 001 bis 112 2070 812; alle 1302 , nicht Standard mit kurzem Vorderwagen) Karmann Ghia Typ 14 (FIN 141 2000 001 bis 142 2070 812) Typ 181 (FIN 181 200 001 bis 181 3200 000) Typ 3 (FIN 311 2000 001 bis...
in stock
Ball bearing for dynamo, fits various types
fits for armature of all DC alternators two pieces required per dynamo
Bearing piece for rocker arm shaft, fits type 1 engines & WBX
fits for Beetle, Karmann Ghia & Type 147 (from engine no. 9 205 700) Bus T1 (from engine no. 710 800) Type 3 & Type 34 (from engine no. 672 698) Type 181 Bus T2 Bus T3 (CT, CZ & WBX) original spare part, NOS limited quantity
in stock
Bearing shell for crankshaft bearing no. 2, 4th undersize, for type 1 engine (from 05/60)
not for 30hp engines except Bus T1 (from engine no. 3 400 000) 1,00mm undersize (shaft) 65,0mm Ø outer dimension (standard) original spare part, NOS few available spare part numbers for comparison: 113 105 555 D & 131 105 555 Price for...
in stock
Bearing shell for crankshaft bearing no. 2, standard size, for type 1 engines (from 05/60)
not for 30hp engines except Bus T1 (from engine No. 3 400 000) standard size (shaft) 65,0mm Ø outer dimension (standard) original spare part, NOS few available spare part numbers for comparison: 113 105 531 C, 113 105 531 D & 131 105 531...
in stock
Bearing shells for crankshaft bearing No. 2, 2nd undersize, for type 1 engines (from 05/60)
not for 30hp engines except Bus T1 (from engine no. 3 400 000) 0.50 undersize (shaft) 65.0 mm Ø outer dimension (standard) original spare part, NOS few available spare part numbers for comparison: 113 105 543 D & 131 105 543 Price for...
in stock
Big Pack Engine Gasket Kit 25kw (34PS) 1,2 after 08/60
Das große Set bestehend aus Motordichtsatz Simmering Kurbelwelle Öl-Sieb Stößelschutzrohre Spannbügel passend für 1.2 Liter Motoren ab 08/60
in stock
Big Pack Engine Gasket Kit fits 1,3-1,6 Engines
Das große Set bestehend aus Motordichtsatz in Erstausrüster Qualität Simmering Kurbelwelle Öl-Sieb Stößelschutzrohre Spannbügel passend für 1.3-1.6 Liter Motoren
NEW
in stock
Big-bore cylinder and piston kit 1641cc slip-in
Big-bore cylinder and piston kit 1641cc slip-in fits for: Beetle Type 3 CT/CZ engines Specifications: Bore: 87 mm Stroke: 69 mm Case Ø: 90 mm Cylinder head Ø: 94 mm Piston pin Ø: 22 mm
NEW
Big-bore cylinder and piston kit 1915 cc
Big-bore cylinder and piston kit 1915 cc fits for: Beetle Type 3 CT/CZ engines Specifications: Bore: 94 mm Stroke: 69 mm Casing Ø: 97 mm Cylinder head Ø: 101 mm Piston pin Ø: 22 mm
NEW
Big-bore cylinder and piston kit 2180 cc
Big-bore cylinder and piston kit 2180 cc fits for: Beetle Type 3 CT/CZ engines Specifications: Bore: 92 mm Stroke: 82 mm Casing Ø: 96 mm Cylinder head Ø: 98 mm Piston pin Ø: 22 mm
NEW
Big-bore cylinder and piston kit 2276 cc
Big-bore cylinder and piston kit 2276 cc fits for: Beetle Type 3 CT/CZ engines Specifications: Bore: 94 mm Stroke: 82 mm Casing Ø: 97 mm Cylinder head Ø: 101 mm Piston pin Ø: 22 mm
in stock
Bracket for distributor, T2, Type 3, Type 34 & Type 181
fits for: T2 Type 3 Type 34 Type 181 Originalsparepart
in stock
Bracket for thermostat, fits type 1 engines (09/61 to 07/80)
fits for Beetle (engine-no. 6 120 730 until beginning 1975) Karmann Ghia (from engine no. 6 120 730) Type 147 Fridolin (from engine no. 6 120 730) Bus T1 (from engine no. 6 120 730) Type 181 Bus T2 original spare part, NOS limited...
Bracket for thermostat, fits type 1 engines (from 09/59)
galvanized reproduction fits for Beetle (from engine no. AF 0 129 068, AS 0 256 799 & AJ 0 000 001)) Bus T2 (from approx. 1975) Type 181 (from approx. 1975) This bracket replaced, already from the mid 70's, all brackets used from 06/59...
Cable harness fits for Type 181
Diese Kabelbäume werden nach US-Spezifikationen hergestellt und können im Vergleich zu europäische Modellen Abweichungen aufweisen. Für europäische Modelle und Sonderausstattungen müssen somit entsprechende Änderungen oder Ergänzungen...
Viewed