Typ 3 1500 | 1600
Novelties
No results were found for the filter!
in stock
Needle roller bearing for drive shaft of synchromesh gearbox
Dimensions for comparison Outside approx. 42 mm Inside approx. 25.5 mm Thickness approx. 17 mm
in stock
Noise damper for fuel hose, fits Type 3 & 4
for vehicles with fuel injection fits for Type 3 (from engine no. U 0 000 001) Type 4 original spare part, NOS single item
NOS yellow Headlight Lens, French Edition, Hella
Yellow Lens Manufacturer Hella NOS Parts Remaining Stock Diameter 188mm fit for Beetle (08/67 to 02/74) Bus T2 (up to 07/73) Typ 3 Thing 181 Fridolin Typ 147 Unit Price
in stock
Nose Cone Bushing with seal
suitable for Golf/Jetta 4 speed 1.0-1.3 08/83-10/91 Golf/Jetta 4 speed 1.1-1.3 08/80-07/83 Golf/Jetta 4 speed (GF) 1.3 08/79-07/80 Golf/Jetta 5 speed 1.3 08/85-10/91 Golf/Vento 4 speed 1.4 11/91-08/95 Golf/Vento 5 speed 1.4-1.6...
Notchback Rear Window Seal with groove for chrome trim insert, fits for Type 3
Notchback rear window seal with groove W/molded corner
in stock
Nozzle g45 for idle shut-off valve, fits Type 3 & Type 34 (08/65 to 06/67)
for idle cut-off valves 341 129 413 D (6V) & 341 129 413 E (12V) fits for: Type 3 (engine no. T 0 000 001 to T 0 244 543) original spare part, NOS limited quantity
in stock
Nozzle g50 for idle shut-off valve, fits Type 3 & Type 34 (from 06/67)
for idle cut-off valves 341 129 413 F (6V) & 341 129 413 G (12V) fits for: Type 3 (from engine no. T 0 244 544) original spare part, NOS limited quantity
in stock
Nut for wiper water tank, suitable for various models
fits for: Beetles 1200, 1300 (08//70 to 08/71) Superbeetle Karmann Ghia Type 14 (from 08/67) Type 181 Bus T2 Bus T3 Type 3 (from 11/63) Type 4 Golf Mk I Cabrio (1.3l; all with headlight washer system) Golf Mk I, Scirocco Mk I (with...
in stock
O-Ring for axle flange
Dichtring für seitliche Lagerdeckel am Getriebe passend für: Modelle mit Pendelachse Durchmesser 13 cm
in stock
O-ring for lower torsion arm, original quality
fits for ball joint axle Käfer Karmann Ghia type 14 Type 147 Type 181 Type 3 (from VIN 315 000 001) Type 34 (from VIN 345 000 001) original quality spare part number for comparison 131 405 129
in stock
Oil breather and breather tower, used, fits Type 3 (up to 07/67)
fits for Type 3 (up to engine no. K 0 098 700/ T0 476 124) original spare part, used with traces of use consisting of breather tower 311 101 165 B, oil breather 311 115 451 Cap with scratches, spring and washer without filter single piece
in stock
Oil cooler seals (2 pcs.), fit various models (from 08/69)
for 10mm oil channel fits for Beetle (from VIN 110 2000 001) Karmann Ghia (from VIN 140 2000 001) Type 147 (from VIN 140 2000 001) Type 3 (from VIN 310 2000 001) Type 4 Type 181 (engine code AG) Bus T2 (from VIN 211 2000 001) Bus T3...
in stock
Oil cooler seals (2 pcs.), fit various models (till 07/69)
for 8mm oil channels fit for Beetle (up to VIN 119 1200 000) Karmann Ghia (up to VIN 149 1200 000) Type 147 (up to VIN 149 1200 000) Type 3 (up to VIN 65 745) Type 34 (up to VIN 65 745) Bus T1 Bus T2 (up to VIN 219 300 000)
in stock
Oil cooler, suitable for Type 3/34 (up to 07/62)
passend für: Typ 3/34 (bis Motor-Nr. 65 745) Original-Ersatzteil, NOS Einzelstück
NEW
in stock
Oil cooler, Type 3 + Bus T3
Oil cooler fits for: Type 3 engines, 08/62 and later Bus T3 1.6 petrol engine code CT 08/79-93
in stock
Oil deflector ring, 8mm
Oil scraper ring for inlet valve for camshaft for industrial engine, T2, T3 and 1200 also compatible with Type 1 Mex, Type 181, Type 2 Mex, 1300, 1302, 1303, 1500 and 1600. Vehicle identification number: ab M 122-126 001.
in stock
Oil dipstick with cap, fits for Type 3 + Karmann Ghia Type 14, used
Oil dipstick with cap fits for: Type 3 Karmann Ghia type 14 used
in stock
Oil dipstick, chrome, fits type 1 engines (from 06/59)
fits for Beetle (from 34HP) Bus T1 (from engine no. 3 400 000) Karmann Ghia (from 34HP) Typ 147 (from 34HP) Bus T2 Type 181
in stock
Oil drain plug, magnetic, fits type 1 engines (06/59 to 07/72)
M14 x 1,5 x 10mm fits for Beetle (from engine no. 3 072 320 up to VIN 112 3200 000) Karmann Ghia (from engine no. 3 072 320 up to VIN 142 3200 000) Type 147 (up to VIN 142 3200 000) Bus T1 (from engine no. 3 400 000) Bus T2 (up to VIN...
in stock
Oil Filler Neck, Alu, fit for Typ 1 Engines
Oil filler neck aluminum with angled aluminum cover simplifies filling in oil considerably
in stock
in stock
Oil pan behind the brake drum, fits for Type 3 + Karmann Ghia Typ 34
Oil pan behind the brake drum fits for: Type 3 + Karmann Ghia Type 34 models until 08/62
Oil pressure booster kit, fits for Type 1 engines
Oil pressure booster set consisting of 2 oil pressure control pistons and springs specially designed larger piston and stronger springs increase the oil pressure a must when installing an oil cooler or external filter Installation in...
in stock
Oil pressure booster kit, single
Oil pressure booster kit single fits for Karmann Ghia 08/55-07/69, 1.2-1.6 Bus T1 01/50-07/67, 1.2-1.5 Bus T2 08/67-07/69, 1.6 Type 1 12/47-07/69, 1.2-1.6 Type 3 04/61-07/69, 1.5-1.6
in stock
Oil pressure Switch
suitable for: Golf MK1 engine 1.1 - 1.6 year of manufacture 02/74 - 07/78 Polo MK1 engine 1.1 - 1.6 year of manufacture 02/74 - 07/78 Derby Motor 1.1 - 1.6 Year of manufacture 02/74 - 07/78 Beetle Bus until 07/79 Karmann Ghia bucket Type...
Oil pressure switch 0.3 bar, fit for Type 3/34
0.15...0.45 bar not exact classifiable please compare with existing oil pressure switch Originalsparepart, NOS few available
in stock
Oil Pump 25-37 kW (34-50 PS) from 08/71 + WBX
To year of construction 08/71 cam shafts with 3-point attachment were inserted by the factory. Starting from year of construction 09/71 cam shafts with 4-point attachment were used. In some exchange engines after year of construction...
in stock
Oil Pump 31-37kW(42-50 PS)+25kW(34PS)08/65- from Mot.Nr.9800
To year of construction 08/71 cam shafts with 3-point attachment were inserted by the factory. Starting from year of construction 09/71 cam shafts with 4-point attachment were used. In some exchange engines after year of construction...
in stock
Oil pump cover series, suitable for 25 to 37 kW (34 to 50 PS) and WBX
Fits: Type 1 '67 and later Type 3 '67 and later CT/CZ Water boxer engines
Oil pump extractor for all type 1 engines
fits for: Bus T1 Bus T2 Fridolin Typ 147 Beetle Kübelwagen Karmann Ghia Typ 34 Karmann Ghia Typ 14 Typ 3
in stock
Oil pump for dish cam, 26 mm gears
Oil pump for dish cam 26 mm gears with gaskets suitable for Karmann Ghia 08/71-07/73, 1.3 (AB) Karmann Ghia 04/71-07/73, 1.6 (AD) Thing 181 09/69-07/71, 1.5-1.6 Bus T2 08/69-07/79, 1.6 Bus T3 05/79-12/82, 1.6 Bus T3 07/85-07/92, 2.1 Type...
in stock
Oil pump for flat cam, 26 mm gears
Oil pump for flat cam 26 mm gears with gasket fits for Thing 181 09/69-07/71, 1.5-1.6 Karmann Ghia 08/69-07/71, 1.3-1.6 Bus T2 08/69-07/71, 1.6 Type 1 08/69-12/85, 1.2 Type 1 08/69-07/71, 1.3-1.6 Type 3 08/69-07/71, 1.5-1.6
in stock
Oil pump housing for type 1 engines 08/67 to 07/69
fits for: Type 1/14 (engine no. D 0 230 001 to D 0 525 049, E 0 013 651 to E 0 020 021, F 1 225 019 to F 1 778 163, H 0 822 052 to H 1 124 668 & L 0 018 100 to L 0 024 106) Type 3/34 (engine no. K 0 090 196 to K 0 150 000 & T 0 445 098...
Viewed