Karmann Ghia Typ 14 - Engine
Novelties
No results were found for the filter!
in stock
Carburetor 30 PICT-3, 25kW (34HP), overhauled, in exchange, deposit included in the price
Alle Vergaser außer Repro sind neue original Solex-Vergaser.
in stock
Carburetor 30 PICT-3, 25kW (34PS), in exchange, sport-save-conversion
overhauled and improved - external unchanged more power, less consumption + 11 Nm, + 4 HP, - 0.5 l/100 km old part delivery after receipt of the product The old part deposit of 50.00 EUR is included in the purchase price and will be...
Carburetor 31 PICT-3, 32kW (44HP), fits 08/70 to 07/74, overhauled in exchange
completely overhauled Solex carburetor 31 PICT-3, fits for VW Type 1 engines, 1300cc with 40 & 44HP up to engine no. AB 990 000, AC 008 519 & AR 121 271 All add-on parts were newly yellow chromated, and partially renewed. The newly...
in stock
Carburetor 31 PICT-4, 29/32kW (40/44 hp), fits 08/72 to 07/75, overhauled in exchange
completely overhauled Solex carburetor 31 PICT-4, fits for VW Type 1 engines, 1300cc with 40 & 44HP engine no. AB 715 883 to AB 990 000, from engine no. AC 006 966 & up to engine no. AR 150 000 All add-on parts were newly yellow...
Carburetor 34 PICT-3, 34 to 37kW (46 to 50HP), fits from 08/70, overhauled in exchange
complete overhauled Solex carburetor 34 PICT-3 fits for VW Type 1 engines, 1600cc with 46, 48 & 50HP engine code AH & AE, up to engine no. AF 129 119, AD 990 000, AK 233 364, AS 369 000 All add-on parts were newly yellow chromated, and...
in stock
Carburetor 37 PICT-3
Carburetor 37 PICT-3 Main: 132 Idle: 55 Venturi: 28mm fits for: Beetle Bus T1 Bus T2a + T2b Karmann Ghia Kübelwagen 181
in stock
Carburetor 39 PICT-3
Carburetor 39 PICT-3 Main jet: 137 Idle jet: 55 28mm fits for: Beetle Bus T1 Bus T2a + T2b Karmann Ghia Kübelwagen 181
in stock
Carburetor adaptor 30/31 pict » 1600 manifold
suitable for Type 1/Karmann Ghia all 1.6 Bus 1.6 (not CT) Thing 1.6
in stock
Carburetor base seals for Weber IDF 40 & 44
fit for Weber IDF 40 & 44 Dellorto DRLA 40 & 44 EMPI HPMX 40 & 44
in stock
Carburetor flange 25mm, suitable for 28 to 31 PICT carburetors
You can use this adapter if you convert your engine from 6V to 12V and the carburetor collides with the alternator or dynamo.
in stock
Carburetor gasket set, fits carburetors 28 PICT-1, 28 PICT-2 & 30 PICT-1
fits for Beetle Karmann Ghia type 14 Bus T1 Fridolin type 147 consisting of: gasket between carburetor housing upper part and lower part sealing ring 1,00mm for float needle valve sealing ring for screw plug of main jet gasket 30 for...
Carburetor Kit Type-1 Weber 40 IDF. Bellcrank Linkage
the complete carburetor kits consist of:´ 2 carburetors Air filters Suction tubes throttle linkage gaskets mounting kit the 40IDF system can be used already from a standard 1600 dual channel engine, power increase ca 9kW(12HP) the...
Carburetor Kit Type-1 Weber 44 IDF. Bellcrank Linkage
Die Vergaserkomplettsätze bestehen aus zwei Vergasern, Luftfiltern, Saugrohren, Gasgestänge, Dichtungen und Anbausatz. Die STD- Vergasersätze werden mit einfachem Gasgestänge und Papierluftfiltern geliefert.
Carburetor Kit Type-1 Weber 48 IDF. Bellcrank Linkage
Die Vergaserkomplettsätze bestehen aus zwei Vergasern, Luftfiltern, Saugrohren, Gasgestänge, Dichtungen und Anbausatz. Die Vergasersätze werden mit Gasgestänge und auswaschbaren Luftfiltern geliefert.
in stock
Carburetor repair kit , fits carburetor 28 PICT-1, 28 PICT-2 & 30 PICT-1
fits for Beetle Karmann Ghia type 14 Bus T1 Fridolin type 147 consisting of: gasket between carburetor housing upper part and lower part sealing ring 15x12x1 for float needle valve sealing ring 14,8x11x1,2 for screw plug of main nozzle...
in stock
Carburetor, Repair Set for Solex, 28 PCI
These carburetor repair kits contain all the necessary seals, sealing rings and membranes, as well as a float needle valve and small items to overhaul a carburetor.
in stock
Carburettor 26 VFIS, 18 kW (25 PS), fits until 10/52, overhauled in exchange
fits for Beetle (up to engine no. 1 - 481 712) Bus T1 (up to engine no. 20 - 518 652) The old part deposit of 100,00 EUR is included in the purchase price and will be refunded if the old part is exchangeable.
Carburettor 34 PICT-3 Machined to 37 mm throttle, overhauled in exchange, old part in advance
completely overhauled Solex carburetor 34 Pict 3, with modified throttle body diameter to 37.00 mm. Venturi is also enlarged as well as various other modifications. This results in an increase in power and torque from 1776 cc, which is...
Carburettor 34 PICT-3 Machined to 39 mm throttle, overhauled in exchange, old part delivery after receipt of the product. Deposit included in the price!
komplett überholter Solex Vergaser 34 Pict 3, mit geändertem Drosselklappendurchmesser auf 39,00 mm. Venturi wird ebenfalls vergrössert sowie diverse andere Modifikationen. Das ergibt einen Leistungszuwachs und Drehmomentzuwachs ab 1776...
Carburettor 34 PICT-4, 34 & 37kW (46 & 50HP), fits from 08/75, overhauled in exchange
All carburettors (except repro) are new original Solex carburettors.
Check valve for fuel pipe, fits for pump with screw connection
fits for: fuel pump with screw connection (6 mm pipe) original spare part only few available
Choke Element, 6Volt
fit for Solex 28 PICT-1 Solex 28 PICT-2 Solex 30 PICT-1 Solex 30 PICT-2 Solex 30 PICT-3 Solex 31 PICT-3 Only 6 Volt
in stock
Chrome screw and washer for pulley Typ1 engines
dient zur befestigung der unteren Riemenscheibe zur Kurbelwelle Lieferumfang Schraube M20x1,5 20mm lang und Wellenscheibe Innen 20,7 mm Außen 44 mm Stärke 2 mm
Chrome oil strainer cover, fits 30-54HP
for type 1 engines fits for: Beetle Karmann Ghia Bus T1 (from 30 PS, engine no. 3 999 999) Typ 3 Typ 34 Typ 147 Typ 181 Bus T2 Bus T3 (engine code CT & CZ)
in stock
Chrome oil strainer cover, for 18/22 kW (25/30 hp) engine
including drain plug and gasket therefor fits for: Bus T1 (up to engine no. 3 999 999) Karmann Ghia type 14 Beetle
in stock
Chrome Pulley Bolt & Washer
Extra long chrome Pulley must be used with Bolt-in Sand Seal Pulleys suitable for 181 Thing 09/69-02/79, 1.5-1.6 Karmann Ghia 08/55-07/74, 1.2-1.6 Bus T1 01/50-07/67, 1.2-1.5 Bus T2 08/67-07/79, 1.6 Type 1 12/47-12/85, 1.2-1.6
in stock
Chromoly racing flywheel, 12 Volt, 130 teeth, 200 mm
Chromoly racing flywheel 12 Volt 130 teeth 200 mm suitable for Thing 181 09/69-07/73, 1.5-1.6 Karmann Ghia 08/66-07/73, 1.5-1.6 Bus T1 08/66-07/67, 1.5 Bus T2 08/67-07/73 Type 1 08/66-07/73, 1.5-1.6
Clamp for intake manifold, fits various models (from 01/54)
for carburetor connection fits for Bus T1 (except 25hp) Beetle (up to engine no. H 0 874 199, L 0 019 336 & engine code: AB, AC, AD, AE, AF & AH) Karmann Ghia (up to engine no. E 0 006 000 & F 0 940 716) original spare part, NOS with...
in stock
Clamp for intake manifold, fits various models (from 01/54)
for carburetor connection fits for Bus T1 (except 25hp) Beetle (up to engine no. H 0 874 199, L 0 019 336 & engine code: AB, AC, AD, AE, AF & AH) Karmann Ghia (up to engine no. E 0 006 000 & F 0 940 716) original spare part, NOS with...
in stock
Clamp for intake manifold, fits various models (from 01/54), used
for carburetor connection fits for Bus T1 (except 25hp) Beetle (up to engine no. H 0 874 199, L 0 019 336 & engine code: AB, AC, AD, AE, AF & AH) Karmann Ghia (up to engine no. E 0 006 000 & F 0 940 716) original spare part, used with...
in stock
Clamp for preheating hose, for type 1 engines
for 1200 to 1500 engines fits for Beetle (from engine no. 5 000 001 and 30hp from engine no. 3 949 223) Karmann Ghia (from engine no. 5 000 001 and 30hp from engine no. 3 949 223) Type 147 Bus T1 (from engine no. 3 400 000) Type 3 (from...
in stock
Clamp for throttle cable, suitable for Beetle + Bus
Beetles: 1302/03, 1.2-1.6, 08/6- 07/79 Bus: 1.2-1.6, 08/60-07/79
in stock
Clamp for Valve Cover 18/22 kW (25/30 PS)
Clamping bracket for valve cover 18/22 kW (25/30 hp) fits for: Beetle Karmann Ghia, type 14 Bus T1
in stock
Clip Clutch Release Shaft, only fit for models until year 07/70
fit for Beetle 12/47-07/70 Karmann Ghia 08/55-07/70 Type 3 04/61-07/70 Bus T1 01/50-07/67 Bus T2 08/67-07/70 Thing 09/69-07/70 Not compatible with release bearing 111 141 165 (first version without ball bearing)
in stock
Clip valve clearence 0,1 mm (.004")
for rocker shaft fits for: Beetle Karmann Ghia (14 & 34) T1 Type 3 Type 181 Originalsparepart
in stock
Closing cover, suitable for Type 3, steel
Cap to lock the opening of the oil filler tube in the cankcases of Typ1 and Type 3-engines. Supplied with gasket.
Closing damper for carburetor throttle lever, fits various models
fits for late 34 PICT-3 carburetors original spare part, NOS single item spare part numbers for comparison: 113 129 103, 055 129 103 B
in stock
Clutch disc, 180 mm, spring loaded
Clutch disc 180 mm spring loaded fits for: Beetle, 1.2, 08/70-12/86 Beetle, 1.3, 08/70-07/75 Karmann Ghia, 1.3, 08/70-07/74
in stock
Clutch disc, 200 mm, new, without springs
suitable for: Beetle Typ 3 Karmann Ghia Bus T1 Bus T2 Kübelwagen 181
in stock
Clutch operating shaft fitting kit, fits from 06/59 - 07/75
fits for operating shaft with 16mm diameter
Viewed