Karmann Ghia Typ 14 - Rear axle

schraeglenker-hinterachse
Novelties
Close filters
  •  
  •  
  •  
  •  
  •  
from to
1 From 3
No results were found for the filter!
in stock
Oberes Gummilager für Ausgleichfederstreben, passend für Modelle ab 08/66
1.) Mount, Block Rear Anti Roll, fit for models from year 08/66
passend für Hinterachse ab 08/66 mit Ausgleichsfeder bei Pendelachse
Order number: 501 113 813
€4.25 *
Prices incl. 19% VAT plus shipping costs
501 111 141 b.jpg
Order number: 501 111 141 B
€49.90 *
Prices incl. 19% VAT plus shipping costs
Drehstabschwerter verstellbar 553 mm Schräglenkerachse
Adjustable spring plates (Per Pair) 553 mm
This adjustable torsion bar Swords enable raising or lowering by 40mm by simply adjusting the adjusting screw which is accessible even with mounted wheel. A must for drag racing cars to make fine adjustments on the circuit can, however,...
Order number: 205 511 553 PV
€174.57 *
Prices incl. 19% VAT plus shipping costs
Drehstabschwerter verstellbar 553 mm Pendelachse
Adjustable spring plates (Per Pair) 553 mm
This adjustable torsion bar Swords enable raising or lowering by 40mm by simply adjusting the adjusting screw which is accessible even with mounted wheel. A must for drag racing cars to make fine adjustments on the circuit can, however,...
Order number: 205 511 553 SV
€159.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Drehstabschwerter verstellbar 627 mm Pendelachse
Adjustable spring plates (Per Pair) 627 mm
This adjustable torsion bar Swords enable raising or lowering by 40mm by simply adjusting the adjusting screw which is accessible even with mounted wheel. A must for drag racing cars to make fine adjustments on the circuit can, however,...
Order number: 205 511 627 PV
€203.49 *
Prices incl. 19% VAT plus shipping costs
in stock
Drehstabschwerter verstellbar 675 mm Schräglenkerachse
Adjustable spring plates (Per Pair) 675 mm
This adjustable torsion bar Swords enable raising or lowering by 40mm by simply adjusting the adjusting screw which is accessible even with mounted wheel. A must for drag racing cars to make fine adjustments on the circuit can, however,...
Order number: 205 511 675 SV
€197.75 *
Prices incl. 19% VAT plus shipping costs
10617.89670ab5.jpg
Axle journal, semi-trailing arm
fit for the following vehicles with semi-trailing arm rear axle Beetle Karmann Ghia Type 14 Type 3 Bus T1 -67 converted to semi-trailing arm rear axle Originalpartnumber is only used for comparison 113 501 231
Order number: 231 501 100
€79.95 *
Prices incl. 19% VAT plus shipping costs
in stock
00-9917-7.jpg
Axle Seal closed, fits for Beetle + Typ 3 + Karmann Ghia + Bus T1
closed axle boot fits for: Beetle Typ 3, 1500/1600 Karmann Ghia Typ 14 Karmann Ghia Typ 34 Bus T1
Order number: 501 111 151
€14.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Achsmanschette geschraubt, Rep.-Satz mit Schrauben und Schlauchschellen
Order number: 501 111 153
€11.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Deckel für Ausgleichsfeder außen, passend für Käfer ab 08/66
Order number: 501 113 811
€10.60 *
Prices incl. 19% VAT plus shipping costs
in stock
Anschlagstütze für Federstrebe rechts, passend ab 07/58
Bump Stop Bracket, right, fit from 07/58
passend für Käfer 1,2-1,6 08/59-12/86 Karmann Ghia 1,2-1,6 08/59-07/86 Typ3 1,5-1,6 04/61-07/73
Order number: 501 131 190 A
€19.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Anschlagstütze für Federstrebe links, passend ab 08/58
Order number: 501 131 189 A
€19.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Gummilager für Drehstabdeckel
Bush Torsion Bar inner right, fit for all models from year 08/59-
fit for Beetle Karmann Ghia Type 3 Porsche 356
Order number: 511 311 246
€4.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Gummilager für Drehstabdeckel
Bush Torsion Bar left inner, fit for all models from year 08/59-
fit from 08/59-07/68 left inside and right outside and from 08/68 all models left inside Beetle Karmann Ghia Type 3 Porsche 356
Order number: 511 311 245
€4.95 *
Prices incl. 19% VAT plus shipping costs
in stock
307111325-01.jpg
Bushing for gear, 4. on crown wheel
Originalpartnumber: 111 307 325
Order number: 307 111 325
€31.65 *
Prices incl. 19% VAT plus shipping costs
in stock
Zylinderschraube, M8x48, für Gleichlaufgelenk (24 Stück empfohlen)
Cap screw, M8x48, for constant velocity joint (24 pieces recommended)
fits for: Golf/Jetta, 1.1-1.8 (incl. D), 02/74-02/84 Golf/Jetta, 1.0-1.8 (incl. D), 08/83-12/92 Bus T3, 1.6-2.1 (incl. D), 05/79-07/92 Porsche 914, 1.7-2.0, 01/69-02/76
Order number: 501 113 229 A
€0.85 *
Prices incl. 19% VAT plus shipping costs
in stock
Kronenmutter
Castle nut M 24 x 1.5, fit for different models up to 07/66
wrench size 36 mm fits for Type 1 & Type 14 (up to 07/66) Bus T1 (1200 up to 07/63)
Order number: 501 111 221 Z
€9.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Kronenmutter M 24 x 1,5, passend für verschiedene Modelle ab 09/61
Castle nut M24 x 1.5, fit for different Models from 09/61
wrench size 36 mm fits for Type 3 Type 34 Bus T1 (1500, up to 07/63) Type 147 Type 181 Type 1 & Type 14 (from 08/66)
Order number: 501 311 221 Z
€9.90 *
Prices incl. 19% VAT plus shipping costs
in stock
Drehstabdeckel Pendelachse bis 10/52
Order number: 511 111 255 B
€49.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Drehstabdeckel Pendelachse 10/52-08/59
Cover plates, swing axle
dieser Deckel entspricht dem original Teil original Teile Nummer dient nur zum Vergleich 111 511 255 C
Order number: 511 111 255 C
€27.29 *
Prices incl. 19% VAT plus shipping costs
in stock
301113195-1.png
Cover washer for safety cap, fits various models (08/67 to 07/92)
of the manual or automatic transmission fits for manual transmission of Bus T2 Bus T3 Type 4 fits for automatic transmission of Beetle (from VIN 118 071 440) Karmann Ghia (from VIN 148 071 440) original spare part, NOS limited quantity...
Order number: 301 113 195
€4.90 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Gelenkschutzhülle für Antriebswellengelenk mit Schmierfett MOS2 und Befestigungsmaterial, passend für alle 1302/1303 und Automatik-Käfer Achsmanschette Schräglenker
CV boot with assembly items and grease
mit Schmierfett MOS2 und Befestigungsmaterial passend für 1302, 1303 und Automatik Käfer, Karmann Ghia und Typ 3 mit Schräglenkergetriebe oder Automatik original Qualität Hersteller Febi-Bilstein
Order number: 598 113 151
€14.59 *
Prices incl. 19% VAT plus shipping costs
in stock
501111296-1.jpg
Dichtring am Radlager der Pendelachse, passend für verschiedene Modelle
25,5x2,6mm passend für Käfer Karmann Ghia Typ 147 "Fridolin" Bus T1 Typ 3 Typ 34 Typ 181 "Kübel" (bis FIN 183 2346 524) als Dichtring des Wasserablaufschlauchs der Frischluftregulierung Bus T2 als Dichtring am automatischen Trittbrett...
Order number: 501 111 296
€5.19 *
Prices incl. 19% VAT plus shipping costs
501111133-1.jpg
Order number: 501 111 133
€1.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Doppelblattschwert rechts, passend für Schräglenkerhinterachse von Bj. 08/68 - 12/70
Order number: 511 113 206
€102.71 *
Prices incl. 19% VAT plus shipping costs
in stock
511113116.jpg
Drehstab rechts, passend für Käfer & Karmann Ghia (ab 08/66)
Länge 522mm, Ø 21mm für Fahrzeuge mit Pendelachse passend für Käfer mit Ausgleichsfeder (ab FIN 117 000 001) Karmann Ghia (ab FIN 147 000 001) Original-Ersatzteil, NOS begrenzte Stückzahl
Order number: 511 113 116
€109.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Dichtring für Lagerdeckel, nur für Pendelachse
Drive flange cover o-ring for swing axle
fits for swing axle original spare part, NOS limited quantity material thickness 2 mm
Order number: 501 113 291 A
€1.95 *
Prices incl. 19% VAT plus shipping costs
in stock
8153100110.jpg
Drive shaft , not automatic
passend für: 1302 1303 Typ 3
Order number: 501 113 211
€79.95 *
Prices incl. 19% VAT plus shipping costs
in stock
517113167F-2.jpg
Druckring für Ausgleichsgetriebe, 3,8 mm
passend für Käfer (außer 1302/03) Karmann Ghia Typ 14 Bus T1 Fridolin Typ 147 Typ 181 Typ 3/34 (bis 08/68 - Fahrgest.-Nr. 318 500 000) Original-Ersatzteil, NOS wenige verfügbar
Order number: 517 113 167 F
€6.90 *
Prices incl. 19% VAT plus shipping costs
in stock
513211537-2.jpg
Federscheibe für verschiedene Befestigungen bei Fahrzeugen mit Schräglenkerachse
12 x 24 passend für u.a. Befestigung der Hinterachsstrebe Bus T2 Befestigung der Federstrebe Käfer Karmann Ghia Typ 14 & Typ 34 Typ 181 Typ 3 Original-Ersatzteil, NOS begrenzte Stückzahl
Order number: 513 211 537
€1.50 *
Prices incl. 19% VAT plus shipping costs
in stock
Paßschraube für Schräglenker
Fitting screw for semi-trailing arms
Fitting screw for fastening the trailing arm to the frame
Order number: 501 113 557
€24.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Führung für Schubstange, links, passend für Modelle ab 08/66
Guide for push rod, left side, fits for models from 08/66
fits for: Käfer ( from FIN 117 000 001) Karmann Ghia Typ 14 (from FIN 148 000 001)
Order number: 501 113 839
€19.99 *
Prices incl. 19% VAT plus shipping costs
in stock
mega1457.jpg
Gummibuchse Stabilisator hinten, 08/66- Paar
passend für Käfer und Karmann Ghia 08/66-
Order number: 501 113 753
€8.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Gummilagersatz für einen Schräglenker Lieferumfang 2 Stück
Gummilagersatz für einen Schräglenker (Silent Block)
Einbauseite: hinten pro Schräglenker 2 Stück verbaut
Order number: 501 113 555
€19.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Gummilagersatz für beide Schräglenker (Silent Block) aus Urethan Käfer
Order number: 501 113 555 U
€39.00 *
Prices incl. 19% VAT plus shipping costs
in stock
501113595-01.jpg
Handbrake cable clip (per pair) for IRS axle
fits for Beetle Karmann Ghia, type 14 Type 3 Karmann Ghia, type 34 Type 181 Bus T3 (until 07/84) spare part numbers for comparison 113 501 595 & 251 501 595 A
Order number: 501 113 595
€5.45 *
Prices incl. 19% VAT plus shipping costs
in stock
517113145-1.png
Hexagon bolt M 10 x 18, 10 K, fits different models (05/59 to 08/65)
for ring gear mounting fits for Beetle with fully synchnonized gear box (from VIN 3 192 507) Karmann Ghia Type 14 (from VIN 3 192 507) Bus T1 (from VIN 469 505 until 216 028 431) Type 3 (up to VIN 316 042 518) Type 34 (up to VIN 346 042...
Order number: 517 113 145
€3.90 *
Prices incl. 19% VAT plus shipping costs
in stock
2.) Lagerplatte außen für Ausgleichsfeder, passend für Modelle ab 08/66
Order number: 501 113 809
€10.60 *
Prices incl. 19% VAT plus shipping costs
501 113 504_01.jpg
Left semi-trailing arm bead-blasted and high-gloss powder coated
Left trailing arm used but sandblasted and primed, without bearings and bushings. When ordering, please note whether you need this article by Dec. or from Dec. 70, or whether the feather sword has the single or double attachment. Tip:...
Order number: 501 113 503
€192.78 *
Prices incl. 19% VAT plus shipping costs
in stock
Drehstab links, Pendelachse, 08/59 -
Left-hand torsion bar, fits Beetle & Karmann Ghia (from 08/59)
Länge 522/523mm, Ø 22mm für Fahrzeuge mit Pendelachse ohne Ausgleichsfeder passend für Käfer (ab FIN 2 528 668) Karmann Ghia (FIN 2 528 668 bis 146 1021 300) Original-Ersatzteil, NOS begrenzte Stückzahl
Order number: 511 111 115
€109.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Drehstab links, Schräglenker
Left-hand torsion bar, fits models with double articulated axle (from 08/66)
length 676mm, Ø 22mm fits for Beetle (from VIN 117 000 001) Karmann Ghia (from VIN 147 000 001) Type 3 Sedan (from VIN 317 000 001) Type 34 (from VIN 347 000 001) original spare part, NOS limited quantity
Order number: 511 311 115 D
€99.00 *
Prices incl. 19% VAT plus shipping costs
Ölfangschale hinter der Bremstrommel Käfer, Karmann etc.
Oil pan behind the brake drum
fit for Beetle, Karmann Ghia etc. Models up to 07/63
Order number: 501 111 631
€43.55 *
Prices incl. 19% VAT plus shipping costs
in stock
Distanzring außen für Hinterradlager Pendelachse
Outer Axle Spacer, Swing Axle
Made in Germany polished and nitrided
Order number: 501 111 303
€16.27 *
Prices incl. 19% VAT plus shipping costs
in stock
8152250602.jpg
Outer rubber bearing for torsion bar, fits various models (from 08/59)
fits for Beetle (from VIN 118 071 440 (automatic gear) or VIN 119 00 001 (manual gear)) Karmann Ghia (from VIN 148 071 440 (automatic gear) or VIN 149 00 001 (manual gear)) Type 3 (from VIN 318 015 226 (automatic gear) or VIN 319 00 001...
Order number: 511 111 245 E
€5.00 *
Prices incl. 19% VAT plus shipping costs
in stock
501113303-1.png
Outer spacer ring for rear wheel bearing of the double articulated axle
fits for Beetle, Karmann Ghia, Type 3 & Type 181 "Thing"
Order number: 501 113 303
€15.90 *
Prices incl. 19% VAT plus shipping costs
in stock
Paar Urethan Drehstabgummilager mit 45mm Innendurchmesser Käfer
Pair of urethan torsion bar bearings, fits various models (from 08/59)
45mm inner diameter fits for inner right & outer left Beetle (VIN 2 528 668 to 118 1016 100) Karmann Ghia (VIN 2 528 668 to 148 1016 100) Type 3 (up to VIN 318 500 000) Typ 34 (up to VIN 348 500 000) Typ 147 (up to VIN 148 1016 100)...
Order number: 511 315 247
€33.80 *
Prices incl. 19% VAT plus shipping costs
in stock
Paar Urethan Drehstabgummilager mit 48mm Durchmesser für innen, passend für Modelle ab Bj. 08/59 Käfer
Pair of urethan torsion bar bearings, fits various models (from 08/59)
48mm inner diameter fits for outer right & inner left Beetle (VIN 2 528 668 to 118 1016 100) Karmann Ghia (VIN 2 528 668 to 148 1016 100) Type 3 (up to VIN 318 500 000) Typ 34 (up to VIN 348 500 000) Typ 147 (up to VIN 148 1016 100)...
Order number: 511 315 246 U
€28.27 *
Prices incl. 19% VAT plus shipping costs
1 From 3
Viewed