Karmann Ghia Typ 14 - Engine
Novelties
No results were found for the filter!
in stock
Main bearing set, Std./+0.50mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, Std./+0.75mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
Main bearing set, Std./Std.
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main Gearing Set until 18/22 kW (25/30 PS), Welle: 0.25, Housing: 0,5 mm
suitable for: Beetle Karmann Ghia Typ3 Bus
in stock
Main Gearing Set, 18 kW/30 PS, Welle: 0.5 , Housing: 0,5 mm
for 18KW/25HP and 22KW/30HP Beetle, Karmann Ghia 1.2 -12.62 Bus T1 1.2 -12.62 Crankcase : 0.50mm 1. oversize Crankshaft : 0.50mm 2. undersize Bearing collar: 24.00mm STD
in stock
Main Gearing Set, until 18/22 kW (25/30 PS), Welle: Std, Housing: 0,5 mm
suitable for: Beetle Karmann Ghia Typ 3 Bus
in stock
Main jet 100, for Solex carburetor 28 PCI (10/52 to 07/65)
fits for Beetle (engine no. 1 - 481 713 to 4 050 000) Karmann Ghia (up to engine no. 3 912 903) Type 147 (up to engine no. 4 050 000) original spare part, NOS limited quantity
in stock
Main jet 105, for Solex carburetor 28 PCI (10/52 to 07/65)
fits for Beetle (engine no. 1 - 481 713 to 4 050 000) Karmann Ghia (up to engine no. 3 912 903) Type 147 (up to engine no. 4 050 000) Bus T1 (engine no. 20 - 518 653 to 3 580 000) original spare part, NOS limited quantity
in stock
Main jet 117.5, for Solex carburetor 28 PCI (10/52 to 07/65)
fits for Beetle (engine no. 1 - 481 713 to 4 050 000) Karmann Ghia (up to engine no. 3 912 903) Type 147 (up to engine no. 4 050 000) Bus T1 (engine no. 20 - 695 356 to 3 580 000) original spare part, NOS limited quantity
in stock
Main jet screw plug, for various carburettors (10/52 to 07/73)
for Solex carburettors 28 PCI, 28 PICT, 28 PICT-1, 30 PICT-1, 32 PHN-1 & 32 PHN-2 fits for Beetle (engine no. 1 - 481 713 to D 0 050 314, up to engine no. E 0 014 000, F 1 237 506, H 0 874 199 & L 0 019 336) Karmann Ghia (up to engine...
in stock
Manifold boot kit for air intake with clamps, silicone, red
Quantity Unit: Set Material: Silicone Colour: Red approx. 34 mm Ø and 41mm Ø
in stock
Master Bearing, Housing: Std, Welle: Std, Bund: Std
65,00mm Außen-Ø Standard Gehäusemaß Standard Kurbelwellenmaß Standard Lagerbund passend für Käfer (ab Motor-Nr. 5 000 001) Karmann Ghia (ab Motor-Nr. 5 000 001) Typ 147 "Fridolin" (ab Motor-Nr. 5 000 001) Bus T1 (ab Motor-Nr. 3 400 000)...
Membrane für Kraftstoffpumpe, passend für 25- & 30PS-Motor
passend für Käfer Karmann Ghia Bus T1 Original-Ersatzteil, NOS nur wenige vorhanden
in stock
Metal gasket for flywheel, fits various models (08/60 to 04/66)
for flywheel 113 105 271 B & 211 105 271 fits for Beetle (up to engine no. D 0 076 331, E 0 004 200 & F 0 741 384) Karmann Ghia (up to engine no. D 0 076 331, E 0 004 200 & F 0 741 384) Type 147 (up to engine no. D 0 076 331) Bus T1...
in stock
Mitnehmerscheibe Kühlgebläserad, für Typ 1-Motoren (bis 07/80)
geeignet für Käfer (bis FIN 118 600 001) Karmann Ghia (bis FIN 148 600 001) Typ 147 Fridolin (bis FIN 148 600 001) Bus T1 (teilweise, irgendwann weggefallen ohne Datum) Bus T2 (Motor-Nr. B 0 137 106 bis B 0 520 000 & C 0 017 009 bis C 0...
in stock
Motordichtsatz von Goetze, passend für Bus T1 30 PS
passend für 30 PS Transporter Motor original Schachtel mit Neuteilen aus Altbestand, NOS wenige verfügbar
in stock
Mounting kit for release shaft, fits for models from year 08/70
The set consists of: 1 bushing left 1 bushing right 1 circlip 1 shim 1 return spring for the release lever Dimensions of the individual parts are as follows: Bushing on release lever side : inside 20 mm Ø, outside approx. 26.98, length...
in stock
Mutter für Zylinderkopf M10, passend ab 08/55
passend für Typ 1-Motoren (ab Motor-Nr. 1 - 1 120 615) Typ 3-Motoren Typ 4-Motoren Original-Ersatzteil, NOS wenige vorhanden
Nabe des Kühlgebläserades, für Typ 1-Motoren
passend für Käfer Karmann Ghia Typ 147 Fridolin Bus T1 Reproduktion der Mitte der 60er Jahre entfallenen Nabe 111 119 123
in stock
Nabe des Kühlgebläserades, für Typ 1-Motoren
passend für Käfer Karmann Ghia Typ 147 Fridolin Bus T1 Original-Ersatzteil, NOS begrenzte Menge Mitte der 60er Jahre entfallen und durch 111 119 123 A ersetzt
Nabe des Kühlgebläserades, für Typ 1-Motoren
passend für Käfer Karmann Ghia Typ 147 Fridolin Bus T1 Bus T2 (bis FIN 218 220 000) Typ 181 (außer M 63) Original-Ersatzteil, NOS ersetzte Mitte der 60er Jahre 111 119 123
in stock
Narrow oil sump, with filter kit, cast aluminium
Narrow oil sump with filter kit cast aliminium only 4,5 cm deep Capacity 0,95 L fits for Thing 181 09/69-02/79, 1.5-1.6 Karmann Ghia 08/55-07/74, 1.2-1.6 Bus T1 01/50-07/67, 1.2-1.5 Bus T2 08/67-07/79,1.6 Type 1 12/47-12/85, 1.2-1.6 Type...
in stock
Nozzle g55 for idle cut-off valve, for various Solex carburetors (from 08/65)
for carburetors 28 PICT-2, 30 PICT-1, 30 PICT-2, 34 PDSIT-2 & 34 PDSIT-3 for idle cut-off valves 111 129 413 A (6V) & 111 129 413 B (12V) not for vehicles with exhaust gas purification system (M 157 for USA & CDN) fits for: Beetle...
in stock
Oil Cooler Flange, fits for 1300 -1600 engines, 08/70 up
fits for 1300 to 1600 engines from 08/70 Beetle Karmann Ghia Type 14 Kübelwagen Type 181 Bus T2
in stock
Oil cooler seals (2 pcs.), fit various models (from 08/69)
for 10mm oil channel fits for Beetle (from VIN 110 2000 001) Karmann Ghia (from VIN 140 2000 001) Type 147 (from VIN 140 2000 001) Type 3 (from VIN 310 2000 001) Type 4 Type 181 (engine code AG) Bus T2 (from VIN 211 2000 001) Bus T3...
in stock
Oil cooler seals (2 pcs.), fit various models (till 07/69)
for 8mm oil channels fit for Beetle (up to VIN 119 1200 000) Karmann Ghia (up to VIN 149 1200 000) Type 147 (up to VIN 149 1200 000) Type 3 (up to VIN 65 745) Type 34 (up to VIN 65 745) Bus T1 Bus T2 (up to VIN 219 300 000)
Oil cooler, fits type 1 engines till 07/70
suitable for: Beetle Karmann Ghia Bus T1 Type 147 Type 181 (with 1500cc) Bus T2 (engine code B & C)
in stock
Oil deflector ring, 8mm
Oil scraper ring for inlet valve for camshaft for industrial engine, T2, T3 and 1200 also compatible with Type 1 Mex, Type 181, Type 2 Mex, 1300, 1302, 1303, 1500 and 1600. Vehicle identification number: ab M 122-126 001.
in stock
Oil dipstick, chrome, fits type 1 engines (from 06/59)
fits for Beetle (from 34HP) Bus T1 (from engine no. 3 400 000) Karmann Ghia (from 34HP) Typ 147 (from 34HP) Bus T2 Type 181
in stock
Oil dipstick, fits type 1 engine (from 06/59)
zinc-coated fits for Beetle (from 34HP) Bus T1 (from engine no. 3 400 000) Karmann Ghia (from 34HP) Typ 147 (from 34HP) Bus T2 Type 181
in stock
Oil dipstick, fits type 1 engines (06/59 to 07/80)
variant with angular "ear" fits for Beetle (from 34HP) Bus T1 (from engine no. 3 400 000) Karmann Ghia (from 34HP) Type 147 (from 34PS) Bus T2 (up to VIN 211 2300 000) Type 181 original spare part, NOS limited quantity
in stock
Oil dipstick, fits type 1 engines (06/59 to 07/80))
variant with big "ear" fits for Beetle (from 34HP) Bus T1 (from engine no. 3 400 000) Karmann Ghia (from 34HP) Type 147 (from 34PS) Bus T2 Type 181 original spare part, NOS limited quantity
in stock
Oil dipstick, fits type 1 engines (from 06/59)
variant with small "ear" fits for Beetle (from 34HP) Bus T1 (from engine no. 3 400 000) Karmann Ghia (from 34HP) Type 147 (from 34PS) Bus T2 Type 181 original spare part, NOS limited quantity
Viewed