Beetle/Bug - engine

Novelties
No results were found for the filter!
in stock
123 ignition with vacuum-advance
Intended for standard ex-factory engines which always feature a vacuum for acceleration. Many replaced their standard power Distributor by a Distributor without vacuum advance, a wrong decision. The ignition timing is withdrawn than...
in stock
123 ignition without vacuum-advance
Intended for tuned engines with larger carburetor drive which in most cases no vacuum for advance capabilities. Because the way of carburetor to cylinder head is a lot shorter than with a standard engine has practically no pull this...
123 TUNE ignition for carburetor engines
suitable for: all 1.2-1.6 engines (except 25-30 HP) T3 CT / CZ / CU and all Type 4 engines not suitable for injectors maintenance-free technology, particularly suitable for modified engines
123 Zündverteiler, für D-Jetronic
passend für : Typ 1-Motoren Typ 3-Motoren Typ 4 Motoren mit D-Jetronic
in stock
4 pcs. Set of clamps for intake manifold gaskets (129 111 701 B)
passend für 1,6l (MKB AD, AE, AF, AH, AL, CT & CZ) 47mm & 40mm
in stock
6 Volt alternator, 90 mm diameter, overhaul in exchange, old part delivery after receipt of the product
Please indicate to us when placing your order, if you need an alternator with tapped holes for mounting the controller!
69 mm Counter-weighted crankshaft, 4140 Chromoly
69 mm Counter-weighted crankshaft 4140 Chromoly fits for 181 Thing 09/69-02/79, 1.5-1.6 Karmann Ghia 08/66-12/76, 1.3-1.6 Bus T1 08/63-07/67, 1.5 Bus T2 08/67-07/71, 1.6 Type1 incl. 1302/1303 08/65-03/81, 1.3-1.6 Type3 08/65-07/73, 1.5-1.6
in stock
Abdeckblech für Kraftstoffpumpe, passend für 25 & 30 PS Motoren
passend für 25 & 30 PS Motoren bis Motornr.: 3 949 222 original-Ersatzteil, NOS wenige verfügbar
NEW
in stock
Abdeckblech für untere Riemenscheibe, passend für 30 PS
passend für Käfer Karmann Ghia Bus T1 Original-Ersatzteil, NOS
in stock
AC motor with 3 connector, for external control, overhaul in exchange, old part delivery after receipt of the product
The old deposit of 50.00 EUR is included in the purchase price and will be refunded upon exchangeable old part.
Adapter-Dichtsatz für Ölkühler, passend für Typ 1- & Typ 3-Motoren
für den Einbau von Ölkühlern ab 08/69 in Motoren bis 07/69 Ölkühlern bis 07/69 in Motoren ab 08/69 bestehend aus 2x Dichtring 8mm/10mm 3x Scheibe Einbauanleitung Original-Ersatzteilsatz, NOS wenige vorhanden
in stock
Air baffle bottom left, galvanized, top quality, fits 29-37 kW (40-50 hp)
This galvanized air baffle for the pushrod protection tubes has the nuts and mounting holes in place. No rework is necessary as with the inexpensive repros.
in stock
Air baffle bottom, front right, galvanized, top quality, 25 kW (34 hp)
This galvanized air baffle for the pushrod protection tubes has the nuts and mounting holes in place. No rework is necessary as with the inexpensive repros.
in stock
Air baffle bottom, front right, galvanized, top quality, 29-37 kW (40-50 hp).
This galvanized air baffle for the pushrod protection tubes has the nuts and mounting holes in place. No rework is necessary as with the inexpensive repros.
in stock
Air baffle bottom, right rear, galvanized, top quality, 25 kW (34 hp)
This galvanized air baffle for the pushrod protection tubes has the nuts and mounting holes in place. No rework is necessary as with the inexpensive repros.
in stock
Air baffle bottom, right rear, galvanized, top quality, 29-37 kW (40-50 hp).
This galvanized air baffle for the pushrod protection tubes has the nuts and mounting holes in place. No rework is necessary as with the inexpensive repros.
in stock
Air filter element (paper), fits various models (from 08/71)
original quality fits for Beetle (with paper air filter) Golf Mk 1, Jetta Mk 1, Scirocco Mk 1 - 1.1 to 1.6 until 05/75; FN; diesel (CK) Golf Mk 2, Jetta Mk 2 - 1.3 (NZ); 1.8 (GX, EV, GZ, HT) Passat Mk 1 - diesel Passat Mk 2 - diesel (CR,...
in stock
Alternator with 51 Ampere, fit for ACD Engine
Die Altteil-Kaution in Höhe von 50,00 EUR ist im Kaufpreis enthalten und wird bei tauschfähigem und gereinigtem Altteil erstattet. Altteil-Anlieferung nach Erhalt des Produktes
in stock
Alternator/dynamo back plate set
fits for 34 to 50hp type 1 engines for alternator or dynamo with 105mm diameter consisting of inner and outer plate for fan housing and stiffening flange spare part numbers for comparison 131 119 259, 131 119 261 & 131 119 271
Alu-Valve covers with ventilation , Evolution Type 1
German Product fits all Typ 1 engines except 24,5-30 HP
in stock
Aluminum oil cooler, standard
suitable for: Beetle, 1.6 year of construction 08/70 to 04/79 Bus T2, 1.6 from 08/70 to 07/71 Golf GTI, 1.6 + 1.8 GTI year 01/77 to 02/84 Scirocco GTI, 1.6 + 1.8 from 01/77 to 10/83
Andrehklaue, passend für verschiedene Modelle
passend für Industriemotor Typ 122, 122/1, 122/2, 126 Typ 181 Kübelwagen Original-Ersatzteil, NOS Ausführung mit Loch durch Schaft 11,5 mm Ø Loch für die Kurbel 21 mm Ø Schaftlänge 25 mm M 20 Nut im Schaft gelb verzinkt wenige vorhanden...
NEW
in stock
Ausrücklager mit Kohlering, passend für Fahrzeuge (bis 08/57)
passend für Käfer bis 57 Bus T1 bis 57 Kübelwagen Typ 82 Schwimmwagen 166 original-Ersatzteil, NOS wenige verfügbar Lieferung ohne Befestigungsklammern.
Ausrückwelle, passend für verschiedene Modelle (08/70 bis 09/71)
passend für Käfer (FIN 111 2000 001 bis 112 2070 812; alle 1302 , nicht Standard mit kurzem Vorderwagen) Karmann Ghia Typ 14 (FIN 141 2000 001 bis 142 2070 812) Typ 181 (FIN 181 200 001 bis 181 3200 000) Typ 3 (FIN 311 2000 001 bis...
in stock
Ausrückwelle, passend für verschiedene Modelle (ab 09/71)
passend für Käfer (ab FIN 112 2070 813 bis Dezember 1985; auch 1302 und 1303 ) Käfer Standard (ab April 1972) Karmann Ghia Typ 14 (ab FIN 142 2070 813) Typ 181 (ab FIN 182 2000 001) Typ 3 (ab September 1971)
in stock
Baffle plate for cylinder
MODEL Engine Construction Year Beetle 1.2-1.6 08/65-12/77 T1 1303 1.3-1.6 08/70-04/79 Bus 1.5-1.6 01/63-07/71 Type 3 1.5-1.6 04/61-07/73
in stock
Ball bearing for dynamo, fits various types
fits for armature of all DC alternators two pieces required per dynamo
Bearing bush for release shaft, fits various models (until 10/64)
fits for Beetle (up to VIN 3 192 507) Beetle standard (up to VIN 115 247 528) Karmann Ghia type 14 (up to VIN 3 192 507) Bus T1 (up to VIN 469 505) original spare part, NOS
Big Pack Engine Gasket Kit 25kw (34PS) 1,2 after 08/60
Das große Set bestehend aus Motordichtsatz Simmering Kurbelwelle Öl-Sieb Stößelschutzrohre Spannbügel passend für 1.2 Liter Motoren ab 08/60
Big Pack Engine Gasket Kit fits 1,3-1,6 Engines
Das große Set bestehend aus Motordichtsatz Simmering Kurbelwelle Öl-Sieb Stößelschutzrohre Spannbügel passend für 1.3-1.6 Liter Motoren
in stock
Cam Shaft Drive Gear 25-37 kW (34-50 PS) + WBX
Fits: Type 1 (except 25 and 30 hp) Type 3 CT Water boxer engines
in stock
Cam Shaft Kit, Engle W 110, suitable for Type 1
consisting of: Sport cam shaft 284 degrees Beam Springs Hardware
Viewed