181 Thing - Engine
Novelties
No results were found for the filter!
in stock
Lock ring for distributer drive gear
fit for Thing 181 09/69-02/79, 1.5-1.6 Karmann Ghia 08/55-07/74, 1.2-1.6 Bus T1 01/50-07/67, 1.2-1.5 Bus T2 08/67-07/79, 1.6-2.0 Type 1 12/47-12/85, 1.2-1.6 Type 3 04/61-07/73, 1.5-1.6 Type 4 07/68-03/75, 1.7-1.8
in stock
Lower Cylinder Bolt fits for 1,2 engine 10 x 230 mm
für eine schnellere Reparatur bei einem ausgerissenen oder verschlissenen Gewinde im Kurbelgehäuse zu ermöglichen
in stock
Lower Cylinder Bolt, fit for 1.5-1.6, 10x240mm
to enable faster repair of a stripped or worn thread in the crankcase
Magnetic ring for oil strainer, fits engines (from 08/60)
fits for Type 1 engines (34 to 50hp) Type 3 engines original spare part, NOS single item
in stock
Main bearing set + 0,5 mm/ Std./+ 1,0 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, + 0,5 mm/+ 0,25 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
Main bearing set, + 0,50 mm/Standard
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
Main bearing set, + 0,50/+ 0,50
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, + 1,00 mm/Standard
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing Set, +0,5 mm/+0,25/+1,0 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
Main bearing set, +0,5 mm/Std./+2,0 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, +0,50 mm/+0,50 mm/+1,0 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, +1,0 mm/+0,25/+1,0 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, +1,0/+0,25
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, +1,00 mm/Std./+1,0 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, +1,00 mm/Std./+2,0 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, fits Type 1 engines from 30 hp (from 06/59)
65.50mm outer Ø housing +0.50 (1st oversize) crankshaft -0.50 (2nd undersize) collar 21mm -1.00 (1st undersize) fits for Beetle (from engine no. 5 000 001) Karmann Ghia (from engine no. 5 000 001) Type 147 "Fridolin" (from engine no. 5...
Main bearing set, Std./+0,25 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, Std./+0.50mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, Std./+0.75mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
Main bearing set, Std./Std.
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main Gearing Set, 18 kW/30 PS, Welle: 0.5 , Housing: 0,5 mm
for 18KW/25HP and 22KW/30HP Beetle, Karmann Ghia 1.2 -12.62 Bus T1 1.2 -12.62 Crankcase : 0.50mm 1. oversize Crankshaft : 0.50mm 2. undersize Bearing collar: 24.00mm STD
in stock
Main Gearing Set, until 18/22 kW (25/30 PS), Welle: Std, Housing: 0,5 mm
suitable for: Beetle Karmann Ghia Typ 3 Bus
in stock
Manifold boot kit for air intake with clamps, silicone, red
Quantity Unit: Set Material: Silicone Colour: Red approx. 34 mm Ø and 41mm Ø
in stock
in stock
in stock
in stock
in stock
Master Bearing, Housing: Std, Welle: Std, Bund: Std
65,00mm Außen-Ø Standard Gehäusemaß Standard Kurbelwellenmaß Standard Lagerbund passend für Käfer (ab Motor-Nr. 5 000 001) Karmann Ghia (ab Motor-Nr. 5 000 001) Typ 147 "Fridolin" (ab Motor-Nr. 5 000 001) Bus T1 (ab Motor-Nr. 3 400 000)...
in stock
in stock
Mitnehmerscheibe Kühlgebläserad, für Typ 1-Motoren (bis 07/80)
geeignet für Käfer (bis FIN 118 600 001) Karmann Ghia (bis FIN 148 600 001) Typ 147 Fridolin (bis FIN 148 600 001) Bus T1 (teilweise, irgendwann weggefallen ohne Datum) Bus T2 (Motor-Nr. B 0 137 106 bis B 0 520 000 & C 0 017 009 bis C 0...
in stock
Mounting kit for release shaft, fits for models from year 08/70
The set consists of: 1 bushing left 1 bushing right 1 circlip 1 shim 1 return spring for the release lever Dimensions of the individual parts are as follows: Bushing on release lever side : inside 20 mm Ø, outside approx. 26.98, length...
in stock
Mutter für Zylinderkopf M10, passend ab 08/55
passend für Typ 1-Motoren (ab Motor-Nr. 1 - 1 120 615) Typ 3-Motoren Typ 4-Motoren Original-Ersatzteil, NOS wenige vorhanden
Nabe des Kühlgebläserades, für Typ 1-Motoren
passend für Käfer Karmann Ghia Typ 147 Fridolin Bus T1 Bus T2 (bis FIN 218 220 000) Typ 181 (außer M 63) Original-Ersatzteil, NOS ersetzte Mitte der 60er Jahre 111 119 123
Narrow oil sump, with filter kit, cast aluminium
Narrow oil sump with filter kit cast aliminium only 4,5 cm deep Capacity 0,95 L fits for Thing 181 09/69-02/79, 1.5-1.6 Karmann Ghia 08/55-07/74, 1.2-1.6 Bus T1 01/50-07/67, 1.2-1.5 Bus T2 08/67-07/79,1.6 Type 1 12/47-12/85, 1.2-1.6 Type...
in stock
Nozzle g55 for idle cut-off valve, for various Solex carburetors (from 08/65)
for carburetors 28 PICT-2, 30 PICT-1, 30 PICT-2, 34 PDSIT-2 & 34 PDSIT-3 for idle cut-off valves 111 129 413 A (6V) & 111 129 413 B (12V) not for vehicles with exhaust gas purification system (M 157 for USA & CDN) fits for: Beetle...
in stock
in stock
in stock
Oil Cooler Flange, fits for 1300 -1600 engines, 08/70 up
fits for 1300 to 1600 engines from 08/70 Beetle Karmann Ghia Type 14 Kübelwagen Type 181 Bus T2
in stock
Oil cooler seals (2 pcs.), fit various models (from 08/69)
for 10mm oil channel fits for Beetle (from VIN 110 2000 001) Karmann Ghia (from VIN 140 2000 001) Type 147 (from VIN 140 2000 001) Type 3 (from VIN 310 2000 001) Type 4 Type 181 (engine code AG) Bus T2 (from VIN 211 2000 001) Bus T3...
Oil cooler, fits type 1 engines till 07/70
suitable for: Beetle Karmann Ghia Bus T1 Type 147 Type 181 (with 1500cc) Bus T2 (engine code B & C)
in stock
Oil deflector ring, 8mm
Oil scraper ring for inlet valve for camshaft for industrial engine, T2, T3 and 1200 also compatible with Type 1 Mex, Type 181, Type 2 Mex, 1300, 1302, 1303, 1500 and 1600. Vehicle identification number: ab M 122-126 001.
Viewed