181 Thing - Engine
Novelties
No results were found for the filter!
Clutch operating shaft fitting kit, fits from 06/59 - 07/75
fits for operating shaft with 16mm diameter
in stock
Clutch operating shaft, fits for various models (07/60 to 08/71)
fits for Beetle (from 08/60 to 07/70, FIN 3 192 507 to 110 3100 000) Beetle Standard (from 10/64 to 08/71, VIN 115 247 528 to 112 2070 812) Karmann Ghia Type 14 (from 07/60 to 07/70, from VIN 3 192 507 to 140 3100 000) Type 147 (until...
in stock
Clutch operating shaft, fits for various models (08/70 to 09/71)
passend für Käfer (FIN 111 2000 001 bis 112 2070 812; alle 1302 , nicht Standard mit kurzem Vorderwagen) Karmann Ghia Typ 14 (FIN 141 2000 001 bis 142 2070 812) Typ 181 (FIN 181 200 001 bis 181 3200 000) Typ 3 (FIN 311 2000 001 bis...
in stock
Clutch pressure spring outside, fits various models
white marked fits for Beetle (for clutch 113 141 025 A, 6 pieces required) Bus T1 (up to engine no. 6 908 639, 3 pieces required / from engine no. 6 908 340, 9 pieces required) Karmann Ghia (for clutch 113 141 025 A, 6 pieces required)...
in stock
Clutch Set 180mm, fit for all models from year 08/70, original LUK
Kupplungsset bestehend aus : 1 x Druckplatte 1 x Mitnehmerscheibe 1 x Ausrücklager Die Angaben bei Kuplungen beziehen sich auf den Durchmesser der Kupplungsscheibe bzw. der Druckplatte in mm. Im Zweifelsfall vor der Bestellung die alte...
Clutch Set 200 mm 08/62-07/70
Kupplungsset bestehend aus : 1 x Druckplatte 1 x Mitnehmerscheibe 1 x Ausrücklager Die Angaben bei Kuplungen beziehen sich auf den Durchmesser der Kupplungsscheibe bzw. der Druckplatte in mm. Im Zweifelsfall vor der Bestellung die alte...
Clutch Set 200 mm 08/70-02/76
Kupplungsset bestehend aus : 1 x Druckplatte 1 x Mitnehmerscheibe 1 x Ausrücklager Die Angaben bei Kuplungen beziehen sich auf den Durchmesser der Kupplungsscheibe bzw. der Druckplatte in mm. Im Zweifelsfall vor der Bestellung die alte...
Clutchkit, 180 mm, fit for models up to 07/70, original LUK
Kupplungsset bestehend aus : 1 x Druckplatte 1 x Mitnehmerscheibe 1 x Ausrücklager Die Angaben bei Kuplungen beziehen sich auf den Durchmesser der Kupplungsscheibe bzw. der Druckplatte in mm. Im Zweifelsfall vor der Bestellung die alte...
in stock
NEW
in stock
Condenser, fits various models (05/60 to 02/71)
for ignition distributors 111 905 205 AA, 113 905 205 M, T, 211 905 205 N, P, 311 905 205 E, F, AB, 315 905 205, B & Q fits for Beetle (engine no. D 0 234 015 to D 0 382 979 & from D 0 675 000, to L 0 021 115, engine code H & B) Karmann...
in stock
Connecting bearing set, 0,25 mm
Connecting bearing set 0,25 mm black suitable for Bus T1 08/60-07/67, 1.2-1.5 Bus T2 08/67-07/79, 1.6-2.0 Bus T3 05/79-07/92, 1.6-2.1 Type 1 08/60-12/85, 1.2-1.6 (25-37 kW) Type 3 04/61-07/73, 1.5-1.6
in stock
Connecting rod bearing set, standard
Connecting rod bearing set standard fit for Bus T1 08/60-07/67, 1.2-1.5 Bus T2 08/67-07/79, 1.6-2.0 Bus T3 05/79-07/92 Type 1 08/60-12/85, 1.2-1.6 (25-37kW) Type 3 04/61-07/73, 1.5-1.6
in stock
Connecting rod bearing shell, 2nd undersize, fits engines from 05/60 onwards
+0,50mm not for 30hp engines except Bus T1 (from engine no. 3 400 000) fits for Type 1 engines from 34hp Type 3 engines CT & CZ engines WBX engines original spare part, NOS few available Spare part number for comparison: 113 105 713
NEW
in stock
Connecting rod screw, fits for various models
fits for 37, 40, 44, 46, 47, 48, 50 hp engine Original spare part, NOS
in stock
Core cover for camshaft housing, suitable for Type 1, 2, 4 and WBX
Core cover for camshaft housing suitable for Type 1 Type 2 Type 4 WBX
in stock
Cover with integrated draining plug, for 22/39 kW (30/54PS) engines
with oil drain plug and gasket set fits for all type 1 engines from 34HP onwards Bus T1 (from 30HP, engine no. 3 999 999)
in stock
Cover with integrated draining screw 25/34kW (34-50 PS)
passend für alle 25 bis 37kW (34 bis 50 PS) Motoren
Crank Shaft, Serial, fit for 1300-1600 Typ1 Engines
fit for all 1.3 - 1.6 Typ 1 Engines for example Käfer, Bus, Typ3 etc. New Part (Kein Austausch) 69mm Hub Über Kreuz gebohrt
in stock
Crankshaft bearing no. 1, standard size, fits type 1 engines (from 05/60)
standard dimension 65,0 mm Ø outer dimension original spare part, NOS with storage traces few available
in stock
Crankshaft bearing no. 3, 1st undersize, fits type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 0.25mm undersize (shaft) 65.0mm Ø outer dimension original spare part, NOS few available
in stock
Crankshaft bearing no. 3, 2nd undersize, fits type 1 engines (from 04/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 0.50mm undersize (shaft) 65.0mm Ø outer dimension original spare part, NOS few available
in stock
Crankshaft bearing No. 3, 4th undersize, for type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 1.00 undersize (shaft) 65.0 mm Ø outer dimension (standard) original spare part, NOS few available
in stock
Crankshaft bearing no. 4, 1st undersize, for type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 0.25mm undersize (shaft) 50.0mm Ø outer dimension (standard size) original spare part, NOS not all in original box, not selectable few available
in stock
Crankshaft bearing no. 4, standard size, for type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) standard dimension (shaft) 50.5mm Ø outer dimension (1st housing oversize) original spare part, NOS not all in original box, not selectable few available
in stock
Cushion grip clutch disc, 200 mm
Due to the special lining mixture of organic material and sintered material which is located on both surface sides, a soft but not skidding engagement of the clutch is made possible.
in stock
Cylinder and piston set diameter 1679ccm / 1600 slip-in
Bore: 88 mm Stroke: 69 mm Case Ø: 90 mm Cylinder head Ø: 94 mm Piston pin Ø: 22 mm If you want more power from your engine, there are many options. You can increase the engine power without changing the displacement by changing the...
in stock
Cylinder Bolt Top fits for engine 1.2 , 10 x 178 mm
to enable faster repair of a stripped or worn thread in the crankcase
in stock
Cylinder Bolt, top, fit for 1.5-1.6, 10x204mm
to enable faster repair of a stripped or worn thread in the crankcase
in stock
Cylinder coats (pair) for single port engine 1300, 1500 & 1600
Beetle, Bus, cylinder barrels and air deflector panels are always delivered in pairs.
in stock
Cylinder head nuts M10 (16 pieces), fit from 08/55
fit for Type 3 engines Type 4 engines Type 1 engines (from engine no. 1 120 615)
Cylinders and Pistons 1,6 85,5x69 Mahle
Each set consists of 4 cylinders, 4 pistons with gudgeon pins and piston rings. Piston sets and piston ring sets by request.
in stock
Cylinders and Pistons 22 kW (30 PS)
Bore 77mm / stroke 64mm / cylinder 83.90 above, 81.90 below / piston pin 20mm / 1192ccm Manufacturer Mahle Mahle is finally delivering pistons and cylinders for 30 HP engines again, and these engines have already been delivered from the...
Viewed