181 Thing
Novelties
No results were found for the filter!
Ölfilter, Hochdruck, HP1 Fram
Ölfilter Hochdruckfilter für Full Flow Filterung oder auch an kalten Tagen die beste Wahl , sehr gute Filterleistung bei sehr geringem Durchfluss-Wiederstand HP1 Fram passend für alle Zusatzölfilterhalterungen
in stock
Operating sleeve, 3rd and 4th gear
Original part number: 113 311 315 Beetle 1961 to 67 Karmann Ghia from 1961 to 67 Bus 1961 to 71
Original Hella Comet 500 driving lamp H3, with cap yellow round universal
Original Hella Comet 500 driving lamp H3 with cap yellow round universal included: bulb H3 mounting material cap right + left diameter: 165 mm depth: 65 mm Registration free with corresponding E-mark Universally usable
in stock
Original Valve Cap Pair, with Clamps and Seals
fit for Käfer Karmann Ghia Bus T1, T2 und T3 Engine1.2 -.1.6 (34-50 PS) Wasserboxer 1.9 + 2.1 Set includes 2x Valve Cap 2x Clamp 2x Seal for Valve Cap
in stock
OSRAM NIGHT BREAKER® H4 LED, Conversion kit
Road legal H4 LED in low beam and high beam application in Germany! See and be seen better, for more safety on the road, especially when driving at night. Up to 230% more brightness (compared to minimum ECE R112 requirements....
in stock
OSRAM NIGHT BREAKER® LASER H4 +130%, 2 pcs
With OSRAM Performance- halogen lamps you will have more light on the street: Your daily drive through the city will be more stressless and you will more relax during longer trips with the car. Your vision on the road will be better and...
in stock
in stock
Outer rubber bearing for torsion bar, fits various models (from 08/59)
fits for Beetle (from VIN 118 071 440 (automatic gear) or VIN 119 00 001 (manual gear)) Karmann Ghia (from VIN 148 071 440 (automatic gear) or VIN 149 00 001 (manual gear)) Type 3 (from VIN 318 015 226 (automatic gear) or VIN 319 00 001...
in stock
in stock
Outer spacer ring for rear wheel bearing of the double articulated axle
fits for Beetle, Karmann Ghia, Type 3 & Type 181 "Thing"
in stock
Outer Tie Rod Head with Left-Hand Thread, from 08/67-07/79
fits for: Bus T2 (from 08/67 - 07/79) Beetle (from 05/68) outer left 1302/1303 interior, fits from 08//70 - 07/74 Beetle 1302/ 1303 Type 3 (from 08/67) Made by WERK34 identifying features: up to 05/68 M10 x 1 from 05/68 M12 x 1.5
in stock
Outer Tie Rod Head with Right-Hand Thread, from 08/67-07/79
fits for Bus T2 (from 08/67 - 07/79) Beetle (from 05/68) outer right Beetle 1302/ 130 Outside from 08/70 Type 3 (from 08/67) Made by WERK34 identifying features: up to 05/68 M10 x 1 from 05/68 M12 x 1.5
Outlet connection for left heat exchanger, fits for Type 1 engines from 01/63
with flap diameter 60mm fits for: 30 HP engines (from engine no. 3 949 223) 34 HP engines (from engine no. 7 336 420) 37 to 50 HP engines original spare part, NOS only few available
Outlet connection for right heat exchanger, fits for Type 1 engines (from 01/63)
with flap diameter 60mm fits for: 30 HP engines (from engine no. 3 949 223) 34 HP engines (from engine no. 7 336 420) 37 to 50 HP engines original spare part, NOS only few available
in stock
Outlet valves 1300 & 1600 ccm
30,0 x 9 mm 4 piece fits for Type 1 engines: AC (ab 008 540) AR (ab 009 253) AK AJ AF (ab 124 871) AS (ab 194 453) ACD (bis 258 800) and for: CT CZ
in stock
Paar Exzenterbuchsen für Achsschenkel mit erweitertem Einstellbereich
Paar Exzenterbuchsen für Achsschenkel mit erweitertem Einstellbereich für negative Sturzeinstellung.
in stock
in stock
in stock
in stock
in stock
in stock
Pair Lowering Springs 50mm, with certificate for all 1302/03
Abnahme und Eintragung erforderlich passend für alle 1302 / 1303 Bei diesen Tieferlegungsfedern kann der Serienstabilisator weiter verwendet werden. Mit Gutachten Käfer 1302/03 8.70-
in stock
Pair of EMPI valve covers, aluminium, screwable
fit for all 1,2/1,5/1,6 from year 11/61 and WBX-Engines
in stock
Pair of intake manifolds (right and left), used , fits 1.3 L engine
fits for 1,3 engine the pair consists of 113 129 709 J 113 129 710 E original spare part, used few available
in stock
Pair of pull handles, aluminum, for Bus T1
Hergestellt aus Aluminium passend für Bus T1 auch für andere Fahrzeuge verwendbar
Pair of shielding plates, fits for single channel preheating
type 1 engines 1200 to 1600ccm with single preheating fits for Beetle (from engine no. 7 336 420) Bus T1 (from engine no. 5 000 001) Karmann Ghia (from engine no. 7 336 420) Type 147 (from engine no. 7 336 420) Bus T2 Type 181 Since this...
Pair of steering knuckles complete with flanged bolts, overhauled, in exchange, old part delivery after receipt of the product
The old deposit of 200.00 EUR is included in the purchase price and will be refunded upon exchangeable old part.
in stock
in stock
Pair of urethan torsion bar bearings, fits various models (from 08/59)
45mm inner diameter fits for inner right & outer left Beetle (VIN 2 528 668 to 118 1016 100) Karmann Ghia (VIN 2 528 668 to 148 1016 100) Type 3 (up to VIN 318 500 000) Typ 34 (up to VIN 348 500 000) Typ 147 (up to VIN 148 1016 100)...
in stock
Pair of urethan torsion bar bearings, fits various models (from 08/59)
48mm inner diameter fits for outer right & inner left Beetle (VIN 2 528 668 to 118 1016 100) Karmann Ghia (VIN 2 528 668 to 148 1016 100) Type 3 (up to VIN 318 500 000) Typ 34 (up to VIN 348 500 000) Typ 147 (up to VIN 148 1016 100)...
in stock
Pair of urethane torsion bar bearings, fits various models
inner diameter 2" (50.8mm) fits Beetle, Karmann Ghia, Type 3, Type 147....
in stock
in stock
Paper gasket for flywheel, fits different models
fits for Bus T1 (34 hp from 11/64) Beetle (34 hp (from 08/66) Thing type 181 Bus T2 (1.6 engine) original spare part, NOS
in stock
in stock
in stock
PETEC, Body Adhesive and Sealant, black, 310ml
wide range of harbors strong adhesion bridges differently sized sealing gaps lasting sealing effect durable and vibration resistant paintable silicone-free not corrosive weather and UV resistant resistant to dilute acids and alkalis
Order number: 9397
Content 0.31 Liter (€35.32 * / 1 Liter)
€10.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Pilot shaft bearing
This bearing is located in the flywheel bolt of a type 1, type 3 and CT/CZ engine and in the crankshaft of a type 4, WBX and diesel engine. It is advisable to always replace this bearing when you are going to replace the clutch disc and...
in stock
in stock
in stock
Pinion and crown wheel 7:31
Original part number: 113 517 141 B Beetle to (Fg No. 3 192 506) Bus to (Fg No. 469 505)
in stock
in stock
in stock
Pinion gear for starters, 12 Volt, after 08/69, NOS
NOS original part suitable for the following starters 311 911 023 C 311 911 023 D original part number serves only for comparsion 311 911 023 A please, compare the number of your pinion gear for starters with this number
Viewed