181 Thing
Novelties
No results were found for the filter!
in stock
in stock
Lock upper part of front hood, fits various types
fits for Golf MK1 Golf Convertible (until 07/1983) Caddy MK1 (until 07/83) Jetta MK1 Scirocco MK1 Karmann Ghia Type 14 (from 10/64) Type 181 Type 3 Type 4 Type 147 Made by WERK34 spare part number for comparison 321 823 507 A replaces...
in stock
in stock
in stock
Locking pawl, fits various models
fits for Beetle Karmann Ghia Type 147 Type 181 Bus T1 Type 3 Type 34 Type 4 LT 1st generation original spare part, NOS limited stock
in stock
in stock
in stock
Locking wedge, right on lock pillar, fits for various models
Locking wedge, right on lock column fits for Bus T1 (from VIN 217 000 001) Bus T2 Type 181 LT Mk I (fits rear cargo door as well) original spare part, NOS
in stock
Lower Cylinder Bolt fits for 1,2 engine 10 x 230 mm
für eine schnellere Reparatur bei einem ausgerissenen oder verschlissenen Gewinde im Kurbelgehäuse zu ermöglichen
in stock
Lower Cylinder Bolt, fit for 1.5-1.6, 10x240mm
to enable faster repair of a stripped or worn thread in the crankcase
in stock
Lower shock pad for body mounting on the front axle
fits for: Beetle (from 08/60; not 1302/03) Karmann Ghia (Type 14, from 08/60) Type 147 Type 181 lower underlay between body and front axle
Lowered front axle. Beetle/ Karmann Typ 14 08/65 and later
passend für Käfer (von Bj.1966 bis 2003, außer 1302/03 ), Karmann Ghia Achskörper Zubehör-Qualität Zubehör-Qualität Rasterplatten verstellbarer Vorderachskörper ohne TÜV Gutachten
in stock
Lowered oil shock absorbers
Beetle/Karmann Ghia 1952 and later rear Beetle/Karmann Ghia 1952 until 7/1965 front Bus until 7/1967 rear Bus until 7/1979 front
in stock
Lowered oil shock absorbers, pair
Beetle 1200/1300/1500 08 / 65-, Front Karmann Ghia 08 / 65-, Front Kübelwagen 181 from 08/65
in stock
Lowered/raised ball joint lower side (each) 08/65 and later
Diese Spezial-Traggelenke haben einen extra großen Arbeitsweg für extrem tiefe Fahrzeuge. Ein Muß bei verstellbaren Vorderachsen.
in stock
Lowered/raised ball joint upper side (each) 08/65 and later
Diese Spezial-Traggelenke haben einen extra großen Arbeitsweg für extrem tiefe Fahrzeuge. Ein Muß bei verstellbaren Vorderachsen.
M7 wing nut for clutch cable, sfits various models (04/65 to 12/82)
fits for: Beetle (from VIN 115 685 587) Karmann Ghia (from VIN 145 685 587) Type 147 "Fridolin" (from VIN 145 685 587) Type 3 (from VIN 315 158 980) Type 34 (from VIN 345 158 980) Bus T1 (from VIN 215 134 683) Brazil T1 (from VIN B 8-464...
Magnetic ring for oil strainer, fits engines (from 08/60)
fits for Type 1 engines (34 to 50hp) Type 3 engines original spare part, NOS single item
in stock
Main bearing set + 0,5 mm/ Std./+ 1,0 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, + 0,5 mm/+ 0,25 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
Main bearing set, + 0,50 mm/Standard
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
Main bearing set, + 0,50/+ 0,50
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, + 1,00 mm/Standard
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing Set, +0,5 mm/+0,25/+1,0 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
Main bearing set, +0,5 mm/Std./+2,0 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, +0,50 mm/+0,50 mm/+1,0 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, +1,0 mm/+0,25/+1,0 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, +1,0/+0,25
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, +1,00 mm/Std./+1,0 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, +1,00 mm/Std./+2,0 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, fits Type 1 engines from 30 hp (from 06/59)
65.50mm outer Ø housing +0.50 (1st oversize) crankshaft -0.50 (2nd undersize) collar 21mm -1.00 (1st undersize) fits for Beetle (from engine no. 5 000 001) Karmann Ghia (from engine no. 5 000 001) Type 147 "Fridolin" (from engine no. 5...
Main bearing set, Std./+0,25 mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, Std./+0.50mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main bearing set, Std./+0.75mm
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
Main bearing set, Std./Std.
We recommend Silverline main bearing sets as they have a steel support center main bearing, just like the original bearings. The cheaper bearings have only one main bearing made of aluminium, which can not withstand the long term. This...
in stock
Main Gearing Set, 18 kW/30 PS, Welle: 0.5 , Housing: 0,5 mm
for 18KW/25HP and 22KW/30HP Beetle, Karmann Ghia 1.2 -12.62 Bus T1 1.2 -12.62 Crankcase : 0.50mm 1. oversize Crankshaft : 0.50mm 2. undersize Bearing collar: 24.00mm STD
in stock
Main Gearing Set, until 18/22 kW (25/30 PS), Welle: Std, Housing: 0,5 mm
suitable for: Beetle Karmann Ghia Typ 3 Bus
in stock
in stock
Manifold boot kit for air intake with clamps, silicone, red
Quantity Unit: Set Material: Silicone Colour: Red approx. 34 mm Ø and 41mm Ø
in stock
in stock
in stock
in stock
in stock
in stock
Viewed