Fridolin Typ 147 - Engine
Novelties
No results were found for the filter!
in stock
in stock
Clutch pressure spring outside, fits various models
white marked fits for Beetle (for clutch 113 141 025 A, 6 pieces required) Bus T1 (up to engine no. 6 908 639, 3 pieces required / from engine no. 6 908 340, 9 pieces required) Karmann Ghia (for clutch 113 141 025 A, 6 pieces required)...
in stock
in stock
in stock
in stock
Clutch Set 180mm, fit for all models from year 08/70, original LUK
Kupplungsset bestehend aus : 1 x Druckplatte 1 x Mitnehmerscheibe 1 x Ausrücklager Die Angaben bei Kuplungen beziehen sich auf den Durchmesser der Kupplungsscheibe bzw. der Druckplatte in mm. Im Zweifelsfall vor der Bestellung die alte...
Clutch Set 200 mm 08/62-07/70
Kupplungsset bestehend aus : 1 x Druckplatte 1 x Mitnehmerscheibe 1 x Ausrücklager Die Angaben bei Kuplungen beziehen sich auf den Durchmesser der Kupplungsscheibe bzw. der Druckplatte in mm. Im Zweifelsfall vor der Bestellung die alte...
Clutch Set 200 mm 08/70-02/76
Kupplungsset bestehend aus : 1 x Druckplatte 1 x Mitnehmerscheibe 1 x Ausrücklager Die Angaben bei Kuplungen beziehen sich auf den Durchmesser der Kupplungsscheibe bzw. der Druckplatte in mm. Im Zweifelsfall vor der Bestellung die alte...
Clutchkit, 180 mm, fit for models up to 07/70, original LUK
Kupplungsset bestehend aus : 1 x Druckplatte 1 x Mitnehmerscheibe 1 x Ausrücklager Die Angaben bei Kuplungen beziehen sich auf den Durchmesser der Kupplungsscheibe bzw. der Druckplatte in mm. Im Zweifelsfall vor der Bestellung die alte...
in stock
in stock
in stock
in stock
Connecting bearing set, 0,25 mm
Connecting bearing set 0,25 mm black suitable for Bus T1 08/60-07/67, 1.2-1.5 Bus T2 08/67-07/79, 1.6-2.0 Bus T3 05/79-07/92, 1.6-2.1 Type 1 08/60-12/85, 1.2-1.6 (25-37 kW) Type 3 04/61-07/73, 1.5-1.6
in stock
Connecting rod bearing set, standard
Connecting rod bearing set standard fit for Bus T1 08/60-07/67, 1.2-1.5 Bus T2 08/67-07/79, 1.6-2.0 Bus T3 05/79-07/92 Type 1 08/60-12/85, 1.2-1.6 (25-37kW) Type 3 04/61-07/73, 1.5-1.6
in stock
Connecting rod bearing shell, 2nd undersize, fits engines from 05/60 onwards
+0,50mm not for 30hp engines except Bus T1 (from engine no. 3 400 000) fits for Type 1 engines from 34hp Type 3 engines CT & CZ engines WBX engines original spare part, NOS few available Spare part number for comparison: 113 105 713
in stock
Connecting rod screw, fit for various models (until 07/65)
fit for: Type 1/14 (25, 30 & 34 PS, 37 PS to E 0 003 599, 40 PS to F 0 451 421) Type 147 Type 3/34 (up to engine no. 1 100 000) Bus T1 (up to engine no. 1 100 000) original spare part, NOS limited quantity
in stock
Connecting rod screw, fits for various models
fits for 37, 40, 44, 46, 47, 48, 50 hp engine Original spare part, NOS
in stock
in stock
Core cover for camshaft housing, suitable for Type 1, 2, 4 and WBX
Core cover for camshaft housing suitable for Type 1 Type 2 Type 4 WBX
in stock
Cover plate for lower belt pulley
fits for original spare part, NOS few available Spare part numbers for comparison 111 119 551 B
in stock
Cover plate for lower pulley, fits models from 12/63 to 07/69
fits for Beetle, Karmann Ghia, Type 147 (engine no. 7 336 420 up to D 0 525 049, up to E 0 020 021, up to F 1 778 163, up to H 0 874 199, up to L 0 019 336) Bus T1 (from engine no. 7 336 420) original spare part, NOS few available spare...
in stock
Cover with integrated draining plug, for 22/39 kW (30/54PS) engines
with oil drain plug and gasket set fits for all type 1 engines from 34HP onwards Bus T1 (from 30HP, engine no. 3 999 999)
in stock
Cover with integrated draining screw 25/34kW (34-50 PS)
passend für alle 25 bis 37kW (34 bis 50 PS) Motoren
Crank Shaft, Serial, fit for 1300-1600 Typ1 Engines
fit for all 1.3 - 1.6 Typ 1 Engines for example Käfer, Bus, Typ3 etc. New Part (Kein Austausch) 69mm Hub Über Kreuz gebohrt
in stock
Crankshaft bearing no. 1, standard size, fits type 1 engines (from 05/60)
standard dimension 65,0 mm Ø outer dimension original spare part, NOS with storage traces few available
in stock
Crankshaft bearing no. 3, 1st undersize, fits type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 0.25mm undersize (shaft) 65.0mm Ø outer dimension original spare part, NOS few available
in stock
Crankshaft bearing no. 3, 2nd undersize, fits type 1 engines (from 04/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 0.50mm undersize (shaft) 65.0mm Ø outer dimension original spare part, NOS few available
in stock
Crankshaft bearing No. 3, 4th undersize, for type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 1.00 undersize (shaft) 65.0 mm Ø outer dimension (standard) original spare part, NOS few available
in stock
Crankshaft bearing no. 4, 1st undersize, for type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 0.25mm undersize (shaft) 50.0mm Ø outer dimension (standard size) original spare part, NOS not all in original box, not selectable few available
in stock
Crankshaft bearing no. 4, standard size, for type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) standard dimension (shaft) 50.5mm Ø outer dimension (1st housing oversize) original spare part, NOS not all in original box, not selectable few available
in stock
in stock
in stock
Cushion grip clutch disc, 200 mm
Due to the special lining mixture of organic material and sintered material which is located on both surface sides, a soft but not skidding engagement of the clutch is made possible.
in stock
in stock
Cylinder and piston kit 1192 cc (1200)
suitable for Type 1 engines Specifications Bore: 77 mm Stroke: 64 mm Case: 90 mm Cylinder head: 90 mm Piston pin: 20 mm
in stock
Cylinder and piston set diameter 1679ccm / 1600 slip-in
Bore: 88 mm Stroke: 69 mm Case Ø: 90 mm Cylinder head Ø: 94 mm Piston pin Ø: 22 mm If you want more power from your engine, there are many options. You can increase the engine power without changing the displacement by changing the...
in stock
Cylinder Bolt Top fits for engine 1.2 , 10 x 178 mm
to enable faster repair of a stripped or worn thread in the crankcase
in stock
Cylinder Bolt, top, fit for 1.5-1.6, 10x204mm
to enable faster repair of a stripped or worn thread in the crankcase
in stock
Cylinder coats (pair) for single port engine 1300, 1500 & 1600
Beetle, Bus, cylinder barrels and air deflector panels are always delivered in pairs.
in stock
in stock
Cylinder head nuts M10 (16 pieces), fit from 08/55
fit for Type 3 engines Type 4 engines Type 1 engines (from engine no. 1 120 615)
in stock
Cylinders and Pistons 1,6 85,5x69 Mahle
Each set consists of 4 cylinders, 4 pistons with gudgeon pins and piston rings. Piston sets and piston ring sets by request.
Viewed