Fridolin Typ 147 - Engine
Novelties
No results were found for the filter!
in stock
123 ignition with vacuum-advance
Intended for standard ex-factory engines which always feature a vacuum for acceleration. Many replaced their standard power Distributor by a Distributor without vacuum advance, a wrong decision. The ignition timing is withdrawn than...
in stock
123 ignition without vacuum advance for carburetor engines
1-2-3 ignition distributor without vacuum connection , contactless for Type 1 engine in Beetle, Bus, Thing, Fridolin, Type 3 and Karmann Ghia, except 25 and 30 hp engines. This ignition distributor no longer wears out, the adjustment of...
in stock
123 TUNE ignition for carburetor engines
suitable for: all 1.2-1.6 engines (except 25-30 HP) T3 CT / CZ / CU and all Type 4 engines not suitable for injectors maintenance-free technology, particularly suitable for modified engines
in stock
4 pcs. Set of clamps for intake manifold gaskets (129 111 701 B)
passend für 1,6l (MKB AD, AE, AF, AH, AL, CT & CZ) 47mm & 40mm
in stock
6 Volt alternator, 90 mm diameter, overhaul in exchange, old part delivery after receipt of the product
Please indicate to us when placing your order, if you need an alternator with tapped holes for mounting the controller!
in stock
Abdeckblech an doppeltem Vorwärmrohr, hinten links (03/73 bis 01/80)
für 1300- und 1600ccm-Motoren passend für: Käfer 1303 Karmann Ghia Typ 147 Fridolin Original-Ersatzteil, NOS begrenzte Stückzahl
NEW
in stock
Abdeckblech an doppeltem Vorwärmrohr, vorn links (03/73 bis 01/80)
für 1300- und 1600ccm-Motoren passend für: Käfer 1303 Karmann Ghia Typ 147 Fridolin Original-Ersatzteil, NOS
in stock
Abdeckblech an doppeltem Vorwärmrohr, vorn rechts (03/73 bis 01/80)
für 1300- und 1600ccm-Motoren passend für: Käfer 1303 Karmann Ghia Typ 147 Fridolin
NEW
Abdeckblech an doppeltem Vorwärmrohr, vorn rechts (03/73 bis 01/80)
für 1300- und 1600ccm-Motoren passend für: Käfer 1303 Karmann Ghia Typ 147 Fridolin original-Ersatzteil, NOS
NEW
in stock
Abdeckblech für untere Riemenscheibe, gebraucht, passend für Modelle von 1963-67
passend für Käfer Bus T 1 34-,42-,44 PS original-Ersatzteil, gebraucht
Adapter-Dichtsatz für Ölkühler, passend für Typ 1- & Typ 3-Motoren
für den Einbau von Ölkühlern ab 08/69 in Motoren bis 07/69 Ölkühlern bis 07/69 in Motoren ab 08/69 bestehend aus 2x Dichtring 8mm/10mm 3x Scheibe Einbauanleitung Original-Ersatzteilsatz, NOS wenige vorhanden
in stock
Adapting seal kit for oil cooler, fits type 1 & type 3 engines
for the installation of oil coolers from 08/69 in engines up to 07/69 oil coolers up to 07/69 in engines from 08/69 onwards kit consisting of 2x sealing ring 8mm/10mm 3x washer
in stock
in stock
Alternator/dynamo back plate set
fits for 34 to 50hp type 1 engines for alternator or dynamo with 105mm diameter consisting of inner and outer plate for fan housing and stiffening flange spare part numbers for comparison 131 119 259, 131 119 261 & 131 119 271
Alu-Valve covers with ventilation , Evolution Type 1
German Product fits all Typ 1 engines except 24,5-30 HP
in stock
Aluminum oil cooler, standard
suitable for: Beetle, 1.6 year of construction 08/70 to 04/79 Bus T2, 1.6 from 08/70 to 07/71 Golf GTI, 1.6 + 1.8 GTI year 01/77 to 02/84 Scirocco GTI, 1.6 + 1.8 from 01/77 to 10/83
in stock
in stock
Ausrückwelle, passend für verschiedene Modelle (ab 09/71)
passend für Käfer (ab FIN 112 2070 813 bis Dezember 1985; auch 1302 und 1303 ) Käfer Standard (ab April 1972) Karmann Ghia Typ 14 (ab FIN 142 2070 813) Typ 181 (ab FIN 182 2000 001) Typ 3 (ab September 1971)
in stock
Bearing piece for rocker arm axle, fits 1200 & 1500cc engines
fits for Beetle, Karmann Ghia & Type 147 (34hp; up to engine no. 8 339 392) Bus T1 (34hp and 42hp; up to engine no. 7 816 341 and 243 325) Type 3 & Type 34 (45hp; up to engine no. 266 357) original spare part, NOS limited quantity
in stock
Bearing piece for rocker arm axle, fits 1200 & 1500cc engines
fits for Beetle, Karmann Ghia & Type 147 (34hp; from engine no. 8 339 393) Bus T1 (34hp and 42hp; from engine no. 7 816 342 and 243 326 to 710 799) Type 3 & Type 34 (45hp; engine no. 266 358 to 672 697) original spare part, NOS limited...
Bearing piece for rocker arm shaft, fits type 1 engines & WBX
fits for Beetle, Karmann Ghia & Type 147 (from engine no. 9 205 700) Bus T1 (from engine no. 710 800) Type 3 & Type 34 (from engine no. 672 698) Type 181 Bus T2 Bus T3 (CT, CZ & WBX) original spare part, NOS limited quantity
in stock
Bearing shell for crankshaft bearing no. 2, 4th undersize, for type 1 engine (from 05/60)
not for 30hp engines except Bus T1 (from engine no. 3 400 000) 1,00mm undersize (shaft) 65,0mm Ø outer dimension (standard) original spare part, NOS few available spare part numbers for comparison: 113 105 555 D & 131 105 555 Price for...
in stock
Bearing shell for crankshaft bearing no. 2, 4th undersize, for type 1 engine (from 05/60)
not for 30hp engines except Bus T1 (from engine no. 3 400 000) 1.00mm undersize (shaft) 65.0mm Ø outer dimension (standard) original spare part, NOS few available Spare part numbers for comparison: 113 105 555 D & 131 105 555 Price for...
in stock
Bearing shell for crankshaft bearing no. 2, standard size, for type 1 engines (from 05/60)
not for 30hp engines except Bus T1 (from engine No. 3 400 000) standard size (shaft) 65,0mm Ø outer dimension (standard) original spare part, NOS few available spare part numbers for comparison: 113 105 531 C, 113 105 531 D & 131 105 531...
in stock
Bearing shells for crankshaft bearing No. 2, 2nd undersize, for type 1 engines (from 05/60)
not for 30hp engines except Bus T1 (from engine no. 3 400 000) 0.50 undersize (shaft) 65.0 mm Ø outer dimension (standard) original spare part, NOS few available spare part numbers for comparison: 113 105 543 D & 131 105 543 Price for...
in stock
in stock
Big Pack Engine Gasket Kit 25kw (34PS) 1,2 after 08/60
Das große Set bestehend aus Motordichtsatz Simmering Kurbelwelle Öl-Sieb Stößelschutzrohre Spannbügel passend für 1.2 Liter Motoren ab 08/60
in stock
Big Pack Engine Gasket Kit fits 1,3-1,6 Engines
Das große Set bestehend aus Motordichtsatz in Erstausrüster Qualität Simmering Kurbelwelle Öl-Sieb Stößelschutzrohre Spannbügel passend für 1.3-1.6 Liter Motoren
in stock
in stock
in stock
Bracket for thermostat, fits type 1 engines (06/59 to 09/61)
fits for Beetle (engine no. 5 000 001 to 6 120 730) Karmann Ghia (engine no. 5 000 001 to 6 120 730) Typee 147 (engine no. 5 000 001 to 6 120 730) Bus T1 (engine no. 3 400 000 to 6 120 730) original spare part, NOS limited quantity The...
in stock
Bracket for thermostat, fits type 1 engines (09/61 to 07/80)
fits for Beetle (engine-no. 6 120 730 until beginning 1975) Karmann Ghia (from engine no. 6 120 730) Type 147 Fridolin (from engine no. 6 120 730) Bus T1 (from engine no. 6 120 730) Type 181 Bus T2 original spare part, NOS limited...
Bracket for thermostat, fits type 1 engines (from 09/59)
galvanized reproduction fits for Beetle (from engine no. AF 0 129 068, AS 0 256 799 & AJ 0 000 001)) Bus T2 (from approx. 1975) Type 181 (from approx. 1975) This bracket replaced, already from the mid 70's, all brackets used from 06/59...
in stock
in stock
in stock
Cam Shaft Drive Gear 25-37 kW (34-50 PS) + WBX
Fits: Type 1 (except 25 and 30 hp) Type 3 CT Water boxer engines
in stock
Cam Shaft Kit, Engle W 110, suitable for Type 1
consisting of: Sport cam shaft 284 degrees Beam Springs Hardware
in stock
Cam Shaft with Wheel Series (3-Point), fit for Engines until 07/71
fit for engine 25-37 kW (34-50) Up to year of construction 07/71
in stock
Cam Shaft-Set Engle W120 fit for Typ 1 Engines
Set consisting of Sports camshaft 294 degrees Plunger Tappet springs Small parts
Cam, distributor, 25 HP, NOS
For distributor: 211 905 205 C 211 905 205 E 211 905 205 F Beetle -12/53 Bus T1 -12/53
Viewed