Typ 4 411 | 412 - Engine
Novelties
No results were found for the filter!
Protection cap set for ignition cables, fits various models
fits for ignition coil and distributor original spare parts, NOS single set
in stock
Protective cap for 2-fold plug housing, fits Type 3 & Type 4
for vehicles with fuel injection system fits for Type 3 Type 4 original spare part, NOS# only few available
Protective cap for 3-fold plug housing, fits Type 3 & Type 4
for vehicles with fuel injection system fits for Type 3 Type 4 original spare part, NOS# only few available
in stock
Protective cap for 4-way plug housing, fits Type 3 (from 07/71) & Type 4
fits for Type 3 (from engine no. U 0 502 001) Type 4 original spare part, NOS only few available
Protective cap for fuel pump connector, fits Type 3 & Type 4
for vehicles with fuel injection system fits for Type 3 Type 4 original spare part, NOS only few available
in stock
Protective caps for ignition cables, fits various models
fits for spark plug connector, ignition distributor, ignition coil and some electrical connections for air and water cooled models original spare part, NOS marked with 311 905 429 A
in stock
Push Rod Tube 208mm, fit for T2 1.7-2.0
914/4 All 08/69-07/76 VW T.2 1.7-1.8 08/71-07/75 VW T.2 2.0 08/75-12/82
in stock
Retaining ring for automatic choke, fit for Type 3/34, Type 4 & Bus T2
fits for: Type 3/34 Type 4 (carburetor models) Bus T2 (1700 cc) Originalsparepart only few available
Rocker arm shaft, fits Type 4 engines
fits for: Bus T2 Bus T3 Type 4 VW Porsche 914 Porsche 912 original spare part, NOS few available
in stock
Screw plug for oil pressure control piston, suitable for bus T2 & T3
Fits for: Bus T2 1.7-2.0 Baujahr 08/71-07/79 Bus T3 1.6-2.1 05/79-07/92
Seal for oil breather, fits Type 4 engines
fits for Type 4 Bus T2 original spare part, NOS few available
in stock
Seal ring for ignition distributor, fits various models (till 2004)
fits for Beetle Karmann Ghia 14 & 34 Type 147 Type 181 Bus T1, T2 & T3 Type 3 Type 4 K70 industrial engine original spare part
Series resistor for injection, fits various models (from 08/74)
fits for Beetle (with L-JETRONIC) Karmann Ghia (with L-JETRONIC) Type 4 (from engine no. EC 0 000 001) Bus T2 (from engine no. 215 2000 001) Bus T3 (from engine no. CV 0 000 001) original spare part, used single item
in stock
Set of contact breaker points, fits various models (from 08/67)
one-piece with angled plug fits for the following ignition distributors (air cooled models) 113 905 205 P / AA / AB / AC / AD / AE / AH / A J / AK / AL / AM / AN 211 905 205 R / Q / S 311 905 205 R / L / P / S / AA / T / AB / M / AC / AD...
Set of contact breaker points, fits various models (from 08/67)
one-piece with angled plug fits for the following ignition distributors (air cooled models) 113 905 205 P / AA / AB / AC / AD / AE / AH / A J / AK / AL / AM / AN 211 905 205 R / Q / S 311 905 205 R / L / P / S / AA / T / AB / M / AC / AD...
Set of pushrods, fits all Boxer engines
Heads only on one side ready mounted, other sides can be brought to the appropriate length before the heads are mounted.
Set of pushrods, heavy duty, fits all Boxer engines
Heads only on one side ready mounted, other sides can be brought to the appropriate length before the heads are mounted.
in stock
Set of valve guides, 1st oversize, fits Type 4 engines & WBX
bronze alloy with high wear resistance and good fatigue and corrosion resistance for inlet valves inner dimension 7.99 mm outer dimension 12,11 mm length 61mm
in stock
Set of valve guides, 1st oversize, fits Type 4 engines & WBX
bronze alloy with high wear resistance and good fatigue and corrosion resistance for exhaust valves inner dimension 8.98mm outer dimension 13.11 mm length 66.5mm
in stock
Set of valve guides, fits Type 4 engines & WBX
bronze alloy with high wear resistance and good fatigue and corrosion resistance for inlet valves inner dimension 7.99mm outer dimension 12.06mm length 61mm standard size
in stock
Set of valve guides, for Type 4 engines & WBX
bronze alloy with high wear resistance and good fatigue and corrosion resistance for exhaust valves inner dimension 8.98mm outer dimension 13.06mm length 66.5mm standard size
Silicone valve cover gasket, fits 1,7-2,0
Silicone gaskets can be used multiple times over cork gaskets.
in stock
Spacer ring for 123 ignition distributor
The 123ignition ignition distributors have a universal housing, which could be pressed too deep into the crankshaft housing if not installed correctly. This spacer ring is required to create the correct distance and to avoid damage to...
Spark plug with heavy-duty center electrode, fits various models (08/68 to 07/92)
corresponds to BOSCH W7DCO 0.7mm electrode gap fits for Type 4, Golf, Jetta, Polo, Derby, Bus T2 & T3, Passat and others original spare part, NOS few available
Spark plug with heavy-duty center electrode, fits various models (08/68 to 07/92)
manufacturer BOSCH with copper core fits for Type 4, Golf, Jetta, Polo, Derby, Bus T2 & T3, Passat and others original spare part, NOS few available
in stock
Spring of the actuating shaft, fits Type 4 & Bus T2 (08/68 to 07/73)
fits for Type 4 Bus T2 (up to engine no. CA 017 215 & CB 060 604) original spare part, NOS few available
in stock
Stiftschraube für Kipphebelachse, passend für verschiedene Modelle
teilweise passend ab 34 PS für Käfer Karmann Ghia Typ 34 Bus T1 Bus T2 Typ 3 Typ 34 Kübelwagen Typ 181 Fridolin Typ 147 Bus T3 Maße der Stiftschraube M8/M10,gesamt 62 mm lang
in stock
stud for rocker arm axle, Type 4, T2 & T3
fits for. Type 4 T2 (Type 4 engine) T3 (to 07/85, CU & CV engines)
in stock
T-piece for fuel hose, e.g. With double carburettor, fits for fuel line 8mm
Diameter: 7mm Shape: T-Piece Carburettor Type: Dual
in stock
Temperature sensor for suction manifold, fits Type 3 (from 08/69) & Type 4
fits for Type 3 (from engine no. U 0 231 101, U 5 000 000 & X 0 000 001) Type 4 original spare part, NOS only a few available
in stock
Unterdruckschlauch für Typ 4-Einspritzmotoren
passend für Typ 4 (am Abzweigstück mit Flammsperre) Bus T2 (am Zusatzluftregler) Bus T3 (am Zusatzluftregler)
in stock
Vaccum Hose, diameter 4mm inner diamter, Price/Sold per Meter
Vaccum Hose inner diameter 4 mm Price sold per Meter
in stock
Vaccum Hose, diameter 5,5x3mm, black, Price/Sold per Meter
aguide to the promotion of unleaded fuels Can be used for gasoline, oil, diesel, petroleum aromatics, lubricants and liquids based on mineral and glycol Temperature range: -35°C to +90°C, short-term +110°C
Valve Cap, Typ 4, aluminium
Schraubbare Aluminium Ventildeckel mit Verrippung. Auch diese Ventildeckel sind geräuschdämpfend. Im Lieferumfang sind Spezialmuttern für die Kipphebelböcke sowie Kleinmaterial enthalten.
in stock
Valve Cover Seal 1,7/1,8/2,0
fit for: Bus T2 engine 1.7 - 1.8 built in 08/71 to 07/75 Bus T2 and T3 engine 2.0 year of construction 07/75 to 12/82 Porsche 914 engine 1.7 - 1.8 built from 01/69 to 02/76
Valve covers evolution, suitabel for all Type 4 engines
german product suitzable for all Type 4 engines
Ventlil bearing for injection valve, inside
fits for: Type 3 (up to engine no. U 0 384 499) Type 4 (up to engine no. W 0 057 035) original spare part, NOS
in stock
Vergaser 36-40 PDSIT-2 (links), passend für Industriemotor
24 V wurden auch in Typ 4, Porsche 914 & bei Okrasa-Anlagen verbaut (12 V und teilw. andere Düsen) Original-Ersatzteil, NOS nur wenige vorhanden Wir haben nur die linken Vergaser, keine passenden rechten Vergaser!
in stock
Vergaserdichtsatz, passend für Bus T2 & Typ 4 (08/68 bis 12/73)
passend für Bus T2 mit 1700ccm Typ 4 (bis Motor-Nr. Z 030 000) Original-Ersatzteilset, NOS wenige vorhanden
Viewed