Karmann Ghia Type 34 - Engine
Novelties
No results were found for the filter!
Clutchkit, 180 mm, fit for models up to 07/70, original LUK
Kupplungsset bestehend aus : 1 x Druckplatte 1 x Mitnehmerscheibe 1 x Ausrücklager Die Angaben bei Kuplungen beziehen sich auf den Durchmesser der Kupplungsscheibe bzw. der Druckplatte in mm. Im Zweifelsfall vor der Bestellung die alte...
in stock
Compensation line for double carburettor, suitable for type 3/34, NOS
NOS original part suitable for the following engines: Code Letter T 0 805013 1.6 39.71 kw (54hp) Code Letter P 0 006 080 1.6 39.71 kw (54hp) original part number serves only for comparsion 311 129 743 available in limited quantities
Compensation line for double carburettor, suitable for type 3/34, NOS
NOS original part suitable for the following engines: Code letter T to engine number T 0 244 543 1.6 39.71 kw (54hp) Code letter P to engine number P 0 001 299 1.6 39.71 kw (54hp) original part number serves only for comparsion 341 129...
in stock
Connecting bearing set, 0,25 mm
Connecting bearing set 0,25 mm black suitable for Bus T1 08/60-07/67, 1.2-1.5 Bus T2 08/67-07/79, 1.6-2.0 Bus T3 05/79-07/92, 1.6-2.1 Type 1 08/60-12/85, 1.2-1.6 (25-37 kW) Type 3 04/61-07/73, 1.5-1.6
in stock
Connecting piece for air filter, Type 3/34 from 08/67
fits for: Type 3 & Type 34 with injection system (from 318 000 001) Originalsparepart single item
in stock
Connecting rod bearing set, standard
Connecting rod bearing set standard fit for Bus T1 08/60-07/67, 1.2-1.5 Bus T2 08/67-07/79, 1.6-2.0 Bus T3 05/79-07/92 Type 1 08/60-12/85, 1.2-1.6 (25-37kW) Type 3 04/61-07/73, 1.5-1.6
in stock
Connecting rod bearing shell, 2nd undersize, fits engines from 05/60 onwards
+0,50mm not for 30hp engines except Bus T1 (from engine no. 3 400 000) fits for Type 1 engines from 34hp Type 3 engines CT & CZ engines WBX engines original spare part, NOS few available Spare part number for comparison: 113 105 713
in stock
Connecting rod screw, fit for various models (until 07/65)
fit for: Type 1/14 (25, 30 & 34 PS, 37 PS to E 0 003 599, 40 PS to F 0 451 421) Type 147 Type 3/34 (up to engine no. 1 100 000) Bus T1 (up to engine no. 1 100 000) original spare part, NOS limited quantity
NEW
in stock
Connecting rod screw, fits for various models
fits for 37, 40, 44, 46, 47, 48, 50 hp engine Original spare part, NOS
Contact base plate for ignition distributor, fits Type 3/34
fits for Type 3 Type 34 original spare part, NOS only few available spare part numbers for comparison 311 905 227 C BOSCH 1 237 110 064
in stock
Control box for carburetor preheating, fits for all models, NOS
fits for: Karmann Ghia Type 34 Type 3 1500 NOS
in stock
Control box for carburettor preheating, used, suitable for type 3 1600
fits for: Type 3 1600 up to engine no. T 0 893 489 / P 0 006 526 original spare part, used only few available
in stock
Cooling air regulating flap left, fit for type 3/34 (from 08/63)
fits for: Type 3/34 (from engine no. 255 340) Originalsparepart, NOS only few available
in stock
Cooling air regulating flap right, fit for type 3/34 (from 08/63)
fits for: Type 3/34 (from engine no. 255 340) Originalsparepart, NOS only few available
in stock
Cover cap for belt pulley, fits Type 3/34
fits for: Type 3 Type 34 original spare part only few available
in stock
Cover with integrated draining plug, for 22/39 kW (30/54PS) engines
with oil drain plug and gasket set fits for all type 1 engines from 34HP onwards Bus T1 (from 30HP, engine no. 3 999 999)
in stock
Cover with integrated draining screw 25/34kW (34-50 PS)
passend für alle 25 bis 37kW (34 bis 50 PS) Motoren
Crank Shaft, Serial, fit for 1300-1600 Typ1 Engines
fit for all 1.3 - 1.6 Typ 1 Engines for example Käfer, Bus, Typ3 etc. New Part (Kein Austausch) 69mm Hub Über Kreuz gebohrt
in stock
Crankcase vent, used, type 3 & type 34
fits for: Type 3 Type 34 used original spare part single item
in stock
Crankshaft bearing no. 1, standard size, fits type 1 engines (from 05/60)
standard dimension 65,0 mm Ø outer dimension original spare part, NOS with storage traces few available
in stock
Crankshaft bearing no. 3, 1st undersize, fits type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 0.25mm undersize (shaft) 65.0mm Ø outer dimension original spare part, NOS few available
in stock
Crankshaft bearing no. 3, 2nd undersize, fits type 1 engines (from 04/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 0.50mm undersize (shaft) 65.0mm Ø outer dimension original spare part, NOS few available
in stock
Crankshaft bearing No. 3, 4th undersize, for type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 1.00 undersize (shaft) 65.0 mm Ø outer dimension (standard) original spare part, NOS few available
in stock
Crankshaft bearing no. 4, 1st undersize, for type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) 0.25mm undersize (shaft) 50.0mm Ø outer dimension (standard size) original spare part, NOS not all in original box, not selectable few available
in stock
Crankshaft bearing no. 4, standard size, for type 1 engines (from 05/60)
not for 30 HP engines except Bus T1 (from engine no. 3 400 000) standard dimension (shaft) 50.5mm Ø outer dimension (1st housing oversize) original spare part, NOS not all in original box, not selectable few available
in stock
Cup disc for oil vent, fit for type 3/34 (from 08/63)
fits for: two-carburetor engines Type 3 (from engine no. 255 340) Type 34 (from engine no. 255 340) Originalsparepart
in stock
Cushion grip clutch disc, 200 mm
Due to the special lining mixture of organic material and sintered material which is located on both surface sides, a soft but not skidding engagement of the clutch is made possible.
in stock
Cylinder and piston set diameter 1679ccm / 1600 slip-in
Bore: 88 mm Stroke: 69 mm Case Ø: 90 mm Cylinder head Ø: 94 mm Piston pin Ø: 22 mm If you want more power from your engine, there are many options. You can increase the engine power without changing the displacement by changing the...
in stock
Cylinder head nuts M10 (16 pieces), fit from 08/55
fit for Type 3 engines Type 4 engines Type 1 engines (from engine no. 1 120 615)
in stock
Cylinder head, unequipped, fits Type 3 1500 S (08/63 to 07/65)
fits for Type 3 1500 S engine no. 255 340 to 1 100 000 with or without code letter R original spare part, NOS unequipped Inlet approx. 30mm Ø, beveled for 1500 S intake manifolds few available required inlet valves 35 mm Ø required...
in stock
Cylinder head, used, fits Type 3 1500 S (08/63 to 07/65)
fits for Type 3 1500 S engine no. 255 340 to 1 100 000 with or without code letter R original spare part, used inlet valve 35 mm Ø exhaust valves missing 1 stud bolt for rocker arm shaft missing inlet approx. 30mm Ø, beveled for 1500 S...
Cylinder head, without valves, fits 1500/1600 Type 1 & Type 3 single port engines
Cylinder head fits 1500/1600 Type 1 Type 3 single port engines without valves
Cylinders and Pistons 1,6 85,5x69 Mahle
Each set consists of 4 cylinders, 4 pistons with gudgeon pins and piston rings. Piston sets and piston ring sets by request.
in stock
Cylinders and Pistons 22 kW (30 PS)
Bore 77mm / stroke 64mm / cylinder 83.90 above, 81.90 below / piston pin 20mm / 1192ccm Manufacturer Mahle Mahle is finally delivering pistons and cylinders for 30 HP engines again, and these engines have already been delivered from the...
Deckel für Ansaug-Gehäuse, gebraucht, passend für Typ 3 & 34 (ab 04/64)
passend für Typ 3 Karmann Ghia Typ 34 Ab Motor-Nr. 574 404 ( bis dahin geschraubt) original-Ersatzteil, gebraucht Einzelstück
Diaphragm with pressure rod, 1500 cc, fit for Type 3 (up to 07/70) & Type 34 (up to 07/63)
fits for: carburetor 32 PHN Type 3 (up to engine no. K 0 173 002 & M 0 004 016) Type 34 (up to engine no. 255 339) Originalsparepart only few available
in stock
Dichtring für Stiftschrauben, passend für Typ 1-Motoren & WBX
für Stiftschrauben 113 101 399 B passend für Käfer, Karmann Ghia & Typ 147 (ab Motor-Nr. 9 205 700) Bus T1 (ab Motor-Nr. 710 800) Typ 3 & Type 34 (ab Motor-Nr. 672 698) Typ 181 Bus T2 Bus T3 (CT, CZ & WBX) Original-Ersatzteil, NOS...
in stock
Dirko HT sealing compound 70ml
Sealant Dirko HT (red) Permanently elastic silicone sealant, (temperature resistant from -50 ° C to + 280 ° C, short term + 315 ° C): Safe and universal sealing - even of moving parts. Whether surfaces, columns (up to approx. 2 mm) or...
Order number: 11586
Content 0.07 Liter (€232.86 * / 1 Liter)
€16.30 *
Prices incl. 19% VAT plus shipping costs
in stock
Distributor cap, "wide version", 90 mm diameter, fit for for models from 08/60 to 01/64 with 25KW / 34PS
Please compare the diameter and the spare part number 113 905 207 with your old ignition distributor cap before ordering!
Viewed