Karmann Ghia Type 34 - Engine
Novelties
No results were found for the filter!
in stock
Shim for cylinder head 0.8 mm, fit for 1500 & 1600 (from 07/62)
fits for: Type 3 (starting engine no. 065 746) Type 34 (starting engine no. 065 746) T1 T2 T3 (not diesel) originalsparepart only few available
in stock
Shim for cylinder head 1.0 mm, fit for 1500 (up to 07/62)
fits for: Type 3 (up to engine no. 065 745) Type 34 (up to engine no. 065 745) originalsparepart only few available
in stock
Shim for cylinder head 1.0 mm, fit for 1500 & 1600 (from 07/62)
fits for: Type 3 (starting engine no. 065 746) Type 34 (starting engine no. 065 746) T1 T2 T3 (not diesel) originalsparepart only few available
in stock
Shim for cylinder head 1.5 mm, fit for 1500 (up to 07/62)
fits for: Type 3/34 (up to engine no. 065 745) original spare part onlyfewavailable
in stock
Shim for cylinder head 1.5 mm, fit for Type 3 & Type 34
fits for: Type 3 (starting engine no. 065 746) Type 34 (starting engine no. 065 746) T1 T2 T3 (not diesel) originalsparepart only few available
in stock
Shut-off diaphragm, fit for Type 3/34 (08/65 to 07/70)
fits for: Type 3/34 (up to engine no. K 0 173 002 & T 0 805 013) original spare part, NOS only few available
in stock
Sicherheitsabschaltung Benzinpumpe 12 Volt
Aus Sicherheitsgründen darf bei Motorstillstand die Benzinpumpe nicht fördern. Was bei einer mechanischen Benzinpumpe selbstverständlich ist, wird interessant bei der Nachrüstung auf eine elektrische Benzinpumpe. Hier muss eine...
NEW
in stock
Sicherungsscheibe des Drosselklappenhebels für Solex-Vergaser
bei verschiedenen Vergasern verbaut bei Volkswagen früh entfallen und durch erst durch 113 129 355 A, später durch 113 129 355 B ersetzt Original-Ersatzteil, NOS begrenzte Stückzahl
in stock
Sicherungsscheibe für Schwungrad, passend für Typ 1 Motoren
passend für Motoren ab 25 bis 50 PS Original-Ersatzteil, NOS deutsches Produkt begrenzte Stückzahl außen 42mm Ø innen 29mm Ø Materialstärke 1,35 mm
Silicone crank seal standard (flywheel side)
suitable for: Bus T1 Engines 1200 (except 25-30HP) Bus T1 Engines 13-1600 Typ3 Bus T3 only CT/CZ engines
Silicone valve cover gasket, fits 1.2-1.6 from 01/62 & WBX
Silicone gaskets can be used multiple times over cork gaskets.
Single Carburetor Kit Weber 40 IDF Type 1 engine
Recommended is the central carburetor system(with a carburetor) for 1600-1776 cc type 1, please note that we recommend a maximum of 276 degrees camshaft. Tuning should be done by a specialist company. You should also with a series engine...
in stock
Spacer for flywheel, 0.25mm, for Type 1 & Type 3 engines (from 04/66)
fits for Beetle, Karmann Ghia, Type 147 (from engine no. D 0 076 332, E 0 004 201, F 0 741 385 & engine codes H, L, B, AB, AC, AD, AE, AF, AH, AR, AS & AJ) Bus T1 (from engine no. H 0 140 93 Bus T2 Bus T3 (engine codes CT & CZ) Type 3...
in stock
Spacer for flywheel, 0.30mm, for Type 1 & Type 3 engines (from 04/66)
fits for Beetle, Karmann Ghia, Type 147 (from engine no. D 0 076 332, E 0 004 201, F 0 741 385 & engine codes H, L, B, AB, AC, AD, AE, AF, AH, AR, AS & AJ) Bus T1 (from engine no. H 0 140 93 Bus T2 Bus T3 (engine codes CT & CZ) Type 3...
in stock
Spacer for flywheel, 0.34mm, fits Type 1 & Type 3 engines (from 04/66)
fits for Beetle, Karmann Ghia, Type 147 (from engine no. D 0 076 332, E 0 004 201, F 0 741 385 & engine code H, L, B, AB, AC, AD, AE, AF, AH, AR, AS & AJ) Bus T1 (from engine no. H 0 140 93 Bus T2 Bus T3 (engine codes CT & CZ) Type 3...
in stock
Spacer ring for oil cooler, fit for type 3/34 (from 08/69)
fits for: Type 3 (from engine no. K 0 150 001/T 0 690 001) Type 34 (from engine no. K 0 150 001/T 0 690 001) originalsparepart
Spark plug 145 with short thread, fits Type 1 & Type 3 engines
manufacturer BERU heat value 145 electrode gap 0,7mm original spare part, NOS few available
in stock
Spark Plug for cylinder heads with Langgewinde, W8CC
fit for Bus 1.7 - 2.0 (air cooled) sowie andere luftgekühlte Fahrzeuge mit Langgewinde im Zylinderkopf
in stock
Spark Plug Holder
Perfect and neat looking holder to carry a spare set of four spark plugs for your vintage VW or Porsche Produced from fully polished billet aluminium and supplied with stainless steel hardware ready to mount in your engine bay. Designed...
Spark plug NGK BP6HS for tuned engines, 4 pieces
Spark plug NGK BP6HS for tuned engines 4 pieces fits for: Type-1 engines until 9.1992 Type-3 engines CT/CZ engines until 1980 (engine nr. 065010) Specifications: Thread size: M14 x 1.25 Thread length: 12.7 mm Wrench size: 21 mm Gap: 0.7...
in stock
Sport Cam Shaft Engle 276° W100
Sport Cam Shaft Engle 276° W100 suitable for Beetle Bus T1 Bus T2 Fridolin Type 147 Karmann Ghia Type 14 Karmann Ghia Type 34 Type 3 181 Thing
Sport Cam Shaft Engle 284° W110
Sport Cam Shaft Engle 284° W110 suitable for Beetle Type 3 Karmann Ghia Type 14 Karmann Ghia Type 34 Bus T1 Bus T2 181 Thing Fridolin Type 147
Sport Cam Shaft Engle 301° W125
für Dragrace Ventilhub mit Kipphebel 1,1/1:11,679 Gesamtsteuerzeit 301 Spreizu
in stock
Spring clamp for rocker arm shaft, fits type 1 engines & WBX (from 05/59)
fits for Beetle, Karmann Ghia & Type 147 (from 34hp) Bus T1 (from engine no. 3 400 000) Type 3 & Type 34 Type 181 Brasil T1 Bus T2 Bus T3 (CT, CZ & WBX) original spare part, NOS limited quantity
in stock
Spring clip for rocker arm shaft, fits Type 1 engines & WBX (05/59 onwards)
fits for Beetle, Karmann Ghia & Type 147 (from 34hp) Bus T1 (from engine no. 3 400 000) Type 3 & Type 34 Type 181 Brasil T1 Bus T2 Bus T3 (CT, CZ & WBX)
in stock
Spring for cut-off diaphragm, fit for several models (from 08/65)
fits for: Type 181 Bus T2 (1700 to 2000 cc) Bus T3 (engine code CU/CV) Type 3/34 (from engine no. K/T 0 000 001) Type 4 Originalsparepart only few available
in stock
Spring for fast idle cam, Type 3/34 (08/63 - 07/65)
fits for: 1500 ccm engine carburetor 32 PDSIT, 6 V Type 3 & Type 34 (motor nr. 255 340 to 1 100 000) Originalsparepart
in stock
Spring for one-piece drive lever of fuel pump, fits 30 to 50hp engines
length 33mm fits for Beetle (from engine no. 5 000 001) Karmann Ghia (from engine no. 5 000 001) Type 147 (from engine no. 5 000 001) Bus T1 (from engine no. 3 400 000) Typ 3 (from engine no. 13 113) Typ 34 (from engine no. 13 113) Typ...
in stock
Spring for three-arm lever, fit for Type 3/34 (08/63 to 07/65)
fits for: two-carburetor engine with flat piston (M 249) Type 3/34 (engine no. 255 340 to 1 100 000) Originalsparepart only few available
in stock
Stock connection rods (4 pieces)
Scope of delivery 4 pieces Fit for all type 1 engines 13-1600 and for Bus T3 CT / CZ engines
in stock
Stock cylinder head complete
fit for Beetle, Bus and Type 3 1600 cc with dual port carburetor and injection engines Bore: 85.5 mm Combustion chamber: 53 cc Valves: 35.5 x 32 mm Stainless Steel Spark plug size: 14 mm Even with complete cylinder heads, it is always...
in stock
Stock oil pump 21mm gears/6mm studs
original Number is for comparsion only 111 115 107/311 115 107/111 115 111 A
in stock
Stop lever for fast idle cam, Type 3/34
fits for: 1500 ccm engine carburetor 32 PHN originalsparepart
in stock
Sump plate stud kit (6 pieces)
Scope of delivery 6 pieces see Fig. fit for all 1.2-1.6 (except 25 and 30 HP)
in stock
T-piece for fuel hose, e.g. With double carburettor, fits for fuel line 8mm
Diameter: 7mm Shape: T-Piece Carburettor Type: Dual
in stock
Tension spring for cooling air throttle, fit for type 3/34 (from 08/63)
fits for: Type 3 (from engine no. 255 340) Type 34 (from engine no. 255 340) Originalsparepart
Viewed