Karmann Ghia Type 34
Novelties
No results were found for the filter!
in stock
Cap nut for starter protection cap
fits for following starters 311 911 021 113 911 023 211 911 023 311 911 023 B 003 911 023 A 311 911 023 C original spare part, NOS only few available
in stock
Cap screw, M8x48, for constant velocity joint (24 pieces recommended)
fits for: Golf/Jetta, 1.1-1.8 (incl. D), 02/74-02/84 Golf/Jetta, 1.0-1.8 (incl. D), 08/83-12/92 Bus T3, 1.6-2.1 (incl. D), 05/79-07/92 Porsche 914, 1.7-2.0, 01/69-02/76
Capacitor for ignition distributor, fits various models
fits for the following ignition distributors 113 905 205 B / 113 905 205 J / 113 905 205 L please note: length of the cable approx. 65mm In the 60's, several very similar condensers were installed. Their main difference is the length of...
Capacitor for ignition distributor, suitable for various models
length of the cable approx. 43mm In the 60's several very similar capacitors were used. The main difference is the length of the connecting cable - but in function and size they are interchangeable. Therefore this capacitor can be used...
Capacitor for the "giant" distributors
fits for the following ignition distributors VJR 4 BR 25/1 ZV/PAU 4 R 1 ZV/PAU 4 R 2 ZV/PAU 4 R 4 ZV/PAU 4 R 5 ZV/PAU 4 R 6
Carbon brush set (BOSCH) for many 12V starters
fits for many 12V starters from the mid 60s onwards Original part number for comparison: 311 911 215 A original spare part, NOS only few available
in stock
Carbon brush set (SWF) for wiper motor, suitable for Type 3/34 (up to 07/68)
fits for: all SWF wiper motors (up to VIN 318 500 000) original spare part, NOS limited quantity
Carburetor 32 PHN fit for 1.5 with 12 volts
Der Vergaser wird in 12V-Ausführung geliefert. Sollten Sie die 6V-Ausführung benötigen, geben Sie dies bitte bei der Bestellung an. Die Altteil-Kaution in Höhe von 100,00 EUR ist im Kaufpreis enthalten und wird bei tauschfähigen und...
in stock
Carburetor base gasket (Per Pair)
fit for Solex 32 PDSIT-2/3 Brosol H32/34 PDSI-2/3 Weber 34 ICT EMPI EPC 34
in stock
Carburetor base seals for Weber IDF 40 & 44
fit for Weber IDF 40 & 44 Dellorto DRLA 40 & 44 EMPI HPMX 40 & 44
in stock
Carburetor gasket, fits Type 3
for PHN single carburetor original spare part, NOS limited quantity Gaskets from different manufacturers were used - no selection possible.
in stock
Carburetor gasket, fits Type 3
for PHN single carburetor original spare part, NOS limited quantity Gaskets from different manufacturers were used - no selection possible.
in stock
Carburetor housing throttle body, left side
fits for: carburetor 32 PDSIT-2 for Type 3 original spare part
in stock
Carburetor housing throttle body, right side
fits for: carburetor 32 PDSIT-3 for Type 3 original spare part
in stock
Carburetor, Repair Set for Solex, 28 PCI
These carburetor repair kits contain all the necessary seals, sealing rings and membranes, as well as a float needle valve and small items to overhaul a carburetor.
in stock
in stock
Castle nut for tie rod end, fits for all models from 68
M 12 x 1,5 fits for Type 1 (from VIN 118 857 240) Type 14 & 147 (from VIN 148 857 240) Type 181 Bus T2 & T3 Type 3 & 34 Type 4 K 70 LT (1. generation) Golf MK1 Jetta MK1 Caddy MK1 Scirocco MK1 original quality
Castle nut M24 x 1.5, fit for different Models from 09/61
wrench size 36 mm fits for Type 3 Type 34 Bus T1 (1500, up to 07/63) Type 147 Type 181 Type 1 & Type 14 (from 08/66)
in stock
Cavity protection & conservation Spray
long-term corrosion protection for body cavities quick-drying, long-lasting plastic protective film infiltrates and suppresses moisture very good penetration ability, hard-to-reach body cavities are also reached high heat resistance and...
Order number: 14970
Content 0.5 Liter (€25.00 * / 1 Liter)
€12.50 *
Prices incl. 19% VAT plus shipping costs
in stock
Check valve for fuel line, fits for Type 3 & Type 34 (up to 07/65)
fits for: two-carburetor engines (up to 1 100 000) Originalsparepart
in stock
Check valve for fuel line, fits for Type 3 & Type 34 (up to 07/65)
fits for: single-carburetor engines (up to engine no. 1 100 000) original spare part, NOS only few available
in stock
Check valve for fuel line, fits for Type 3 & Type 34 (up to 07/65), used
fits for: single-carburetor engines (up to engine no. 1 100 000) original spare part, used only few available
in stock
Check valve for vacuum line to brake booster
Check valve for vacuum line to brake booster fits for: Bus T2, from 08/67 Bus T3, all Type 3, 08/67-07/73 Type 4, 08/68-07/74 Golf MK1 Jetta MK1 Scirocco MK1
in stock
Cheese-head screw for starter flap housing, fit for Type 3/34
fits for: 1500 ccm engine carburetor 32 PHN Originalsparepart
in stock
Chrome oil strainer cover, fits 30-54HP
for type 1 engines fits for: Beetle Karmann Ghia Bus T1 (from 30 PS, engine no. 3 999 999) Typ 3 Typ 34 Typ 147 Typ 181 Bus T2 Bus T3 (engine code CT & CZ)
in stock
Chromoly racing flywheel, 12 Volt, 130 teeth, 200 mm
Chromoly racing flywheel 12 Volt 130 teeth 200 mm suitable for Thing 181 09/69-07/73, 1.5-1.6 Karmann Ghia 08/66-07/73, 1.5-1.6 Bus T1 08/66-07/67, 1.5 Bus T2 08/67-07/73 Type 1 08/66-07/73, 1.5-1.6
in stock
Cigarette lighter with button, black 6 and 12 volts
A “must have” for the perfect restoration fit for all Beetles, Karmann Ghia, buses, type 3, buckets. Etc. Very good quality
Cigarette lighter with button, gray 6 and 12 volts
A “must have” for the perfect restoration fit for all Beetles, Karmann Ghia, buses, type 3, buckets. Etc. Very good quality
in stock
Cigarette lighter with button: ivory
A "must have" for the perfect restoration fits for all Beetles, Karmann Ghia, Bus, Type 3, Kübel. etc. Very good quality
Clamp for air filter cuff, fit for Type 3/34
fit for: Type 3/34 (only at engines with carburettor) Originalsparepart, NOS
in stock
Clamp for heat exchanger, suitable for Type 3/34
fits for: Type 3/34 original spare part only few available
in stock
Clamp for preheating hose, for type 1 engines
for 1200 to 1500 engines fits for Beetle (from engine no. 5 000 001 and 30hp from engine no. 3 949 223) Karmann Ghia (from engine no. 5 000 001 and 30hp from engine no. 3 949 223) Type 147 Bus T1 (from engine no. 3 400 000) Type 3 (from...
in stock
Clamp for tail pipe, fits for Type 3 & 34 (until 07/71)
fits for Type 3 (up to FIN 311 2500 000) Karmann Ghia type 34 original spare part, NOS limited quantity
in stock
Clamp for throttle cable, suitable for Beetle + Bus
Beetles: 1302/03, 1.2-1.6, 08/6- 07/79 Bus: 1.2-1.6, 08/60-07/79
Clamping bolt for shift cable, suitable for Type 3/34 & Type 4 (automatic)
fits for: Type 3 Type 34 Type 4 only for vehicles with automatic transmission original spare part, NOS only few available
in stock
Clamping bush for heating flap cable, for all vehicles (till 11/66)
fits for Beetle (up to VIN 116 314 086) Karmann Ghia (up to VIN 146 348 599) Type 147 (up to VIN 146 348 599) Bus T1 (up to VIN 216 054 821) Type 3 (up to VIN 316 087 039) Type 34 (up to VIN 346 087 039) original spare part, NOS limited...
Viewed