Karmann Ghia Type 34
Novelties
No results were found for the filter!
in stock
Mounting kit for heater flap cable, for air-cooled models (11/66 to 07/03)
can also be used on earlier vehicles consisting of: 1x intermediate piece for heater flap cable 1x bolt for intermediate piece 1x bolt for heater flap cable 1x hexagon head screw M 5X10 1x lock washer 4 fits for Beetle (from VIN 116 314...
NEW
Mounting kit for rear brake shoes, fits Type 3 / 34 (from 08/63)
fits for Type 3 (from VIN 221 975) Type 34 (from VIN 221 975)
in stock
Mounting kit for release shaft, fits for models from year 08/70
The set consists of: 1 bushing left 1 bushing right 1 circlip 1 shim 1 return spring for the release lever Dimensions of the individual parts are as follows: Bushing on release lever side : inside 20 mm Ø, outside approx. 26.98, length...
in stock
Mounting Kit for Seat Belt
universal mounting kit for seat belt (2 or 3 point-belt) includes: flat washer adapter ring mounting angle screws cover Made by WERK34
in stock
Mutter für Zylinderkopf M10, passend ab 08/55
passend für Typ 1-Motoren (ab Motor-Nr. 1 - 1 120 615) Typ 3-Motoren Typ 4-Motoren Original-Ersatzteil, NOS wenige vorhanden
Nabe für Speedwell Lenkrad passend für Fahrzeuge ab Bj. 75
passend für Speedwell Lenkrad Hersteller: Flat4
in stock
Nadellager (Übergröße) für unteren Traghebel, passend für Typ 3/34 (bis 12/62)
Durchmesser 47,2mm passend für Typ 3 (bis FIN 127 587) Typ 34 (bis FIN 127 587) Original-Ersatzteil, NOS (leichte Lagerspuren möglich) begrenzte Stückzahl
in stock
Narrow oil sump, with filter kit, cast aluminium
Narrow oil sump with filter kit cast aliminium only 4,5 cm deep Capacity 0,95 L fits for Thing 181 09/69-02/79, 1.5-1.6 Karmann Ghia 08/55-07/74, 1.2-1.6 Bus T1 01/50-07/67, 1.2-1.5 Bus T2 08/67-07/79,1.6 Type 1 12/47-12/85, 1.2-1.6 Type...
in stock
Needle bearing (oversize) for lower support lever, fits Type 3/34 (up to 12/62)
diameter 47.2mm fits for Type 3 (up to VIN 127 587) Type 34 (up to VIN 127 587) original spare part, NOS (slight storage traces possible) limited quantity
in stock
Needle bearing for 3rd gear, fully synchronized transmission
fits for Beetle, Karmann Ghia, Bus T1, T2 & T3, Type 3, Type 147 & Type 181 original spare part, NOS few available
in stock
Needle bearing for reverse gear shaft, fully
Original part number: 113 311 523 Beetle to (number 112 2430 353) Karmann Ghia to (Fg No. 112 2430 353) Bucket 181 to (Fg No. 182 2482 841) Bus T1 (Fg No. 469 506 to 217 148 459) Bus T2 to (Fg No. 213 2082 847) Type 3 to (Fg No. 312 2078...
in stock
Needle roller bearing for drive shaft of synchromesh gearbox
Dimensions for comparison Outside approx. 42 mm Inside approx. 25.5 mm Thickness approx. 17 mm
in stock
in stock
Nose Cone Bushing with seal
suitable for Golf/Jetta 4 speed 1.0-1.3 08/83-10/91 Golf/Jetta 4 speed 1.1-1.3 08/80-07/83 Golf/Jetta 4 speed (GF) 1.3 08/79-07/80 Golf/Jetta 5 speed 1.3 08/85-10/91 Golf/Vento 4 speed 1.4 11/91-08/95 Golf/Vento 5 speed 1.4-1.6...
in stock
in stock
in stock
O-ring for lower torsion arm, original quality
fits for ball joint axle Käfer Karmann Ghia type 14 Type 147 Type 181 Type 3 (from VIN 315 000 001) Type 34 (from VIN 345 000 001) original quality spare part number for comparison 131 405 129
in stock
Oil breather and breather tower, used, fits Type 3 (up to 07/67)
fits for Type 3 (up to engine no. K 0 098 700/ T0 476 124) original spare part, used with traces of use consisting of breather tower 311 101 165 B, oil breather 311 115 451 Cap with scratches, spring and washer without filter single piece
in stock
Oil cooler seals (2 pcs.), fit various models (from 08/69)
for 10mm oil channel fits for Beetle (from VIN 110 2000 001) Karmann Ghia (from VIN 140 2000 001) Type 147 (from VIN 140 2000 001) Type 3 (from VIN 310 2000 001) Type 4 Type 181 (engine code AG) Bus T2 (from VIN 211 2000 001) Bus T3...
in stock
Oil cooler seals (2 pcs.), fit various models (till 07/69)
for 8mm oil channels fit for Beetle (up to VIN 119 1200 000) Karmann Ghia (up to VIN 149 1200 000) Type 147 (up to VIN 149 1200 000) Type 3 (up to VIN 65 745) Type 34 (up to VIN 65 745) Bus T1 Bus T2 (up to VIN 219 300 000)
in stock
Oil cooler, suitable for Type 3/34 (up to 07/62)
passend für: Typ 3/34 (bis Motor-Nr. 65 745) Original-Ersatzteil, NOS Einzelstück
in stock
Oil deflector ring, 8mm
Oil scraper ring for inlet valve for camshaft for industrial engine, T2, T3 and 1200 also compatible with Type 1 Mex, Type 181, Type 2 Mex, 1300, 1302, 1303, 1500 and 1600. Vehicle identification number: ab M 122-126 001.
in stock
Oil dipstick with cap, fits for Type 3 + Karmann Ghia Type 14, used
Oil dipstick with cap fits for: Type 3 Karmann Ghia type 14 used
in stock
Oil dipstick, chrome, fits type 1 engines (from 06/59)
fits for Beetle (from 34HP) Bus T1 (from engine no. 3 400 000) Karmann Ghia (from 34HP) Typ 147 (from 34HP) Bus T2 Type 181
in stock
Oil dipstick, fits type 1 engine (from 06/59)
zinc-coated fits for Beetle (from 34HP) Bus T1 (from engine no. 3 400 000) Karmann Ghia (from 34HP) Typ 147 (from 34HP) Bus T2 Type 181
in stock
Oil drain plug, magnetic, fits type 1 engines (06/59 to 07/72)
M14 x 1,5 x 10mm fits for Beetle (from engine no. 3 072 320 up to VIN 112 3200 000) Karmann Ghia (from engine no. 3 072 320 up to VIN 142 3200 000) Type 147 (up to VIN 142 3200 000) Bus T1 (from engine no. 3 400 000) Bus T2 (up to VIN...
in stock
in stock
Oil Filler Neck, Alu, fit for Typ 1 Engines
Oil filler neck aluminum with angled aluminum cover simplifies filling in oil considerably
in stock
in stock
in stock
in stock
in stock
in stock
Oil pan behind the brake drum, fits for Type 3 + Karmann Ghia Typ 34
Oil pan behind the brake drum fits for: Type 3 + Karmann Ghia Type 34 models until 08/62
in stock
Oil pressure booster kit, fits for Type 1 engines
Oil pressure booster set consisting of 2 oil pressure control pistons and springs specially designed larger piston and stronger springs increase the oil pressure a must when installing an oil cooler or external filter Installation in...
in stock
Oil pressure booster kit, single
Oil pressure booster kit single fits for Karmann Ghia 08/55-07/69, 1.2-1.6 Bus T1 01/50-07/67, 1.2-1.5 Bus T2 08/67-07/69, 1.6 Type 1 12/47-07/69, 1.2-1.6 Type 3 04/61-07/69, 1.5-1.6
in stock
Oil pressure Switch
suitable for: Golf MK1 engine 1.1 - 1.6 year of manufacture 02/74 - 07/78 Polo MK1 engine 1.1 - 1.6 year of manufacture 02/74 - 07/78 Derby Motor 1.1 - 1.6 Year of manufacture 02/74 - 07/78 Beetle Bus until 07/79 Karmann Ghia bucket Type...
Oil pressure switch 0.3 bar, fit for Type 3/34
0.15...0.45 bar not exact classifiable please compare with existing oil pressure switch Originalsparepart, NOS few available
in stock
Oil Pump 25-37 kW (34-50 PS) from 08/71 + WBX
To year of construction 08/71 cam shafts with 3-point attachment were inserted by the factory. Starting from year of construction 09/71 cam shafts with 4-point attachment were used. In some exchange engines after year of construction...
in stock
Oil Pump 31-37kW(42-50 PS)+25kW(34PS)08/65- from Mot.Nr.9800
To year of construction 08/71 cam shafts with 3-point attachment were inserted by the factory. Starting from year of construction 09/71 cam shafts with 4-point attachment were used. In some exchange engines after year of construction...
in stock
Viewed