Jetta + Vento + Bora - MK1 Garage

Logo-MK1-Garage
Novelties
Close filters
  •  
  •  
  •  
  •  
from to
1 From 2
No results were found for the filter!
in stock
8899 -01.jpg
16V/G60 brake, conversion kit for rear axle
16V/G60 brake Conversion kit for rear axle Scope of delivery 16V/G60 brake caliper rear left + rear right 16V/G60 brake caliper holder rear left + rear right 16V/G60 brake pads rear
Order number: 23107
€219.00 *
Prices incl. 19% VAT plus shipping costs
23099.jpg
Aluminum Oil Catch Tank, 300ml
Aluminum Oil Catch Tank, 300ml an oil catch tank filters out the oil vapors from the crankcase breather the oil condenses in the oil catch tank and collects in the tank the air cleaned from the oil is then returned to the air filter box...
Order number: 23099
€29.00 *
Prices incl. 19% VAT plus shipping costs
25082-1.jpg
Brake booster 9" with adjustable push rod, fits for Golf MK1
Brake booster 9" with adjustable push rod fits for: Golf MK1 Golf MK1 Convertible Jetta MK1 Caddy MK1 Scirocco MK1 +MK2 Scope of delivery: 1 brake booster 1 protective cover for the push rod
Order number: 25082
€199.00 *
Prices incl. 19% VAT plus shipping costs
in stock
24747.jpg
Brake caliper holder for Plug&Play G60 brake, Wheel bearing housing
Brake caliper holder for Plug&Play G60 brake Wheel bearing housing fits for: Golf MK1 Golf MK1 Convertible Jetta MK1 Caddy MK1 Scirocco MK1 Scope of delivery : 2 brake caliper adapter incl. mounting material
Order number: 24747
€199.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Bremsschlauchhalter für die Hinterachse - ohne bohren oder schweißen
Brake hose holder for all Golf 1 models - no welding or drilling !
They are required when converting the rear axle to a disc brake Rear axle just freshly powder-coated? Don't feel like welding? No welding or drilling is necessary with these brake hose holders. You simply attach it to a screw on your...
Order number: 21820
€28.36 *
Prices incl. 19% VAT plus shipping costs
in stock
Bremslichtschalter inkl. Halter für Bremsenumbau, passend für Golf I
Bremslichtschalter inkl. Halter für Bremsenumbau, passend für Golf I
Mit diesem Halter lässt sich der Bremslichtschalter super einfach montieren. Den Halter an dem serienmäßig vorhandenem Loch mit einer Schraube an der Pedalerie montieren. Bremslichtschalter einstecken , verdrehen , fertig !...
Order number: 16500
€24.56 *
Prices incl. 19% VAT plus shipping costs
in stock
Stoßstangen Spray 400ml - Neuer Glanz für alte Stoßstangen !
Bumper spray 400ml - new shine for old bumpers!
Bumper spray - new shine for old bumpers! Bumper-Paint-Spray is a high-quality, quick-drying textured coating for restoring the typical plastic surfaces of vehicle parts such as bumpers, exterior mirrors and spoilers. Are your bumpers or...
Order number: 21818
€18.65 *
Prices incl. 19% VAT plus shipping costs
in stock
23376-1.jpg
Complete set 16V brake for the front axle, 256 mm, internally ventilated
Complete set 16V brake for front axle 256 mm Internally ventilated the Plug&Play 16V brake which fits without adapter to the original steering knuckle fits for: Golf MK1 Golf MK1 Convertible Jetta MK1 Scirocco MK1 + MK2 Caddy MK1 Scope...
Order number: 23376
€299.00 *
Prices incl. 19% VAT plus shipping costs
24748.jpg
Complete set 16V brake, front, 256 mm, Internally ventilated
Complete set 16V brake front 256 mm Internally ventilated fits for: Golf MK2 Jetta MK2 Corrado Scope of delivery: 2 brake discs 256mm internally ventilated 1 set of brake pads 1 brake caliper front left 1 brake caliper front right 1...
Order number: 24748
€299.00 *
Prices incl. 19% VAT plus shipping costs
in stock
8380-01.jpg
Complete set conversion from drum to disc brake on rear axle 4x100
Complete set conversion from drum to disc brake on rear axle 4x100 Scope of delivery 2 brake discs 1 set of brake pads 2 brake calipers 2 brake caliper holders 2 wheel bearings 2 axle pivots 2 brake hose holders for rear axle 2 hand...
Order number: 23104
€419.00 *
Prices incl. 19% VAT plus shipping costs
in stock
8383-01.jpg
Complete set conversion from drum to disc brake on rear axle 5x100
Complete set conversion from drum to disc brake on rear axle 5x100 Scope of delivery 2 brake discs 1 set of brake pads 2 brake calipers 2 brake caliper holders 2 wheel bearings 2 axle pivots 2 brake hose holders for rear axle 2 hand...
Order number: 23105
€419.00 *
Prices incl. 19% VAT plus shipping costs
in stock
25871-1.jpg
Complete set G60 brake front axle Plug&Play, 280mm internally ventilated
Complete set G60 brake Front axle Plug&Play 280mm Internally ventilated fits for: Golf MK1 Golf MK1 Convertible Jetta MK1 Scirocco MK1 + MK2 Caddy MK1 Scope of delivery: 2 brake disks 280mm internally ventilated 1 set of brake pads 1...
Order number: 25871
€299.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Steuergerätehalter zur Montage an der Spritzwand
Control unit / ECU bracket, for mounting on the bulkhead
Control unit holder for mounting on the bulkhead Often you have the problem that after a motor conversion no suitable holder / space for the new controller is present. With our hater you can solve the problem easily and quickly. The...
Order number: 14777
€74.60 *
Prices incl. 19% VAT plus shipping costs
Kühler, inklusive Kühlerabdeckung und Hochleistungslüfter
Cooler, including cooler cover and high-performance fan, Aluminum
Engine cooler 525x322 mm PL / AU suitable for: Golf MK1 Caddy MK1 Jetta MK1 Scirocco MK1 + MK2 Golf MK1 convertible Engine codes: DX, KT, JH, 2H, PF, EG, EM, PB, EV, RH, RP, JP, ME Consists: Engine radiator Radiator cover with mount for...
Order number: 20011
€234.39 *
Prices incl. 19% VAT plus shipping costs
in stock
Kühler, inklusive Kühlerabdeckung und Hochleistungslüfter
Cooler, including cooler cover and high-performance fan, powder-coated in black
Engine cooler 525x322 mm PL / AU suitable for: Golf MK1 Caddy MK1 Jetta MK1 Scirocco MK1 + MK2 Golf MK1 Cabrio Engine codes: DX, KT, JH, 2H, PF, EG, EM, PB, EV, RH, RP, JP, ME Set consistsof: Engine radiator Radiator cover with mount for...
Order number: 20006
€234.39 *
Prices incl. 19% VAT plus shipping costs
in stock
Dünne Antriebswelle mit 100er Flansch Beifahrerseite, passend für Golf I - MK1 Garage -
Dünne Antriebswelle mit 100er Flansch Beifahrerseite, passend für Golf I - MK1 Garage -
Die Welle schleift am Rahmen ? Das Problem können wir lösen ! Mit dieser Welle spart Ihr euch lästiges schneiden am Rahmen eurer Karosse. Diese speziell angefertigte Welle wurde aus einem Stück gefertigt , es wurde nix geschweißt oder...
Order number: 16668
€213.13 *
Prices incl. 19% VAT plus shipping costs
in stock
Dünne Antriebswelle mit 90er Flansch Fahrerseite, passend für Golf I - MK1 Garage -
Dünne Antriebswelle mit 100er Flansch Fahrerseite, passend für Golf I - MK1 Garage -
Die Welle schleift am Rahmen ? Das Problem können wir lösen ! Mit dieser Welle spart Ihr euch lästiges schneiden am Rahmen eurer Karosse. Diese speziell angefertigte Welle wurde aus einem Stück gefertigt , es wurde nix geschweißt oder...
Order number: 16665
€213.13 *
Prices incl. 19% VAT plus shipping costs
in stock
Dünne Antriebswelle mit 100er Flansch Beifahrerseite, passend für Golf I - MK1 Garage -
Dünne Antriebswelle mit 90er Flansch Beifahrerseite, passend für Golf I - MK1 Garage -
Die Welle schleift am Rahmen ? Das Problem können wir lösen ! Mit dieser Welle spart Ihr euch lästiges schneiden am Rahmen eurer Karosse. Diese speziell angefertigte Welle wurde aus einem Stück gefertigt , es wurde nix geschweißt oder...
Order number: 16667
€213.13 *
Prices incl. 19% VAT plus shipping costs
in stock
Dünne Antriebswelle mit 90er Flansch Fahrerseite, passend für Golf I - MK1 Garage -
Dünne Antriebswelle mit 90er Flansch Fahrerseite, passend für Golf I - MK1 Garage -
Die Welle schleift am Rahmen ? Das Problem können wir lösen ! Mit dieser Welle spart Ihr euch lästiges schneiden am Rahmen eurer Karosse. Diese speziell angefertigte Welle wurde aus einem Stück gefertigt , es wurde nix geschweißt oder...
Order number: 16666
€213.13 *
Prices incl. 19% VAT plus shipping costs
in stock
Befestigungsset für Achszapfen inkl. Bremsschlauchhalter - Kein schweißen oder bohren notwendig!
Fastening set for axle journals including brake hose holder - no welding or drilling necessary!
You need 8 screws to attach your axle journals to the rear axle. Here in this set you also get the two brake hose holders that you use during the conversion on disc brake. Rear axle just freshly powder-coated? Don't feel like welding?...
Order number: 21821
€44.94 *
Prices incl. 19% VAT plus shipping costs
in stock
9048-01.jpg
Fresh air grille, Race Style
Fresh air grille Race Style made of aluminum and black powder coated is simply put on the window and by the hochkurbeln of the disk in the door frame fixed fits for: Golf MK1, two-door Jetta MK1, two-door not fits for: Golf MK1...
Order number: 23103
€99.00 *
Prices incl. 19% VAT plus shipping costs
22276-1.jpg
Front Axle Cross Brace X-Frame for 02M 6 Speed Transmission
Front Axle Cross Brace X-Frame for 02M 6 Speed Transmission With the front axle cross brace, the front and rear wishbone points are connected to each other. This creates an additional stiffness of the frame which has a positive effect on...
Order number: 22276
€271.95 *
Prices incl. 19% VAT plus shipping costs
in stock
22554-01.jpg
Fuel filter, fit for 60mm fuel filter mounting bracket
Pass-through filter with hose connection on both sides Outer diameter: 60mm Outlet: 8mm Inlet: 8mm Length: 140mm
Order number: 22554
€11.99 *
Prices incl. 19% VAT plus shipping costs
in stock
Kraftstoffpumpe, VENOM, G1 - 300l/h
Fuel Pump, VENOM, G1 / 300lph
suitable for: Golf MK1 convertible Golf MK1 Jetta MK1 Caddy 14d Scirocco MK1 + MK2 External fuel pump 12 volts Delivery rate 300 l / h Operating pressure 5 bar (75PSI) this fuel pump is only intended for electronic fuel injection systems
Order number: 20007
€132.04 *
Prices incl. 19% VAT plus shipping costs
in stock
8893-01.jpg
G60 brake conversion kit for the front axle, for Golf II and others
fits for Golf Mk2 Jetta Mk2 Passat Mk3 Corrado Scope of delivery: G60 brake caliper front left + front right G60 brake caliper holder front left + front right G60 Brake pads front axle
Order number: 23106
€219.00 *
Prices incl. 19% VAT plus shipping costs
in stock
25083-1.jpg
Gear knob, real carbon, 72 mm
It is supplied with 3 adapters and can thus be be mounted on different diameters. The adapters have conical holes in 8 , 10 and 12mm and can simply be screwed onto the existing thread are screwed. The Schaltkanuf fits thereby on all...
Order number: 25083
€39.00 *
Prices incl. 19% VAT plus shipping costs
in stock
9085.JPG
Headliner cleaner / adhesive residue remover
Headliner - cleaner / adhesive residue remover The inner headliner is often renewed during a restoration. The insulating mats underneath are usually in a very bad condition condition and should be exchanged for new ones. In order to...
Order number: 23671
€19.90 *
Prices incl. 19% VAT plus shipping costs
9105.jpg
Headliner cleaning set - for removing the old insulating mats
Headliner cleaning set - for removing the old insulating mats This set contains everything you need to perfectly clean your headliner from the inside so that the new insulation mats can be glued cleanly. scope of delivery 1. Headliner -...
Order number: 23664
€35.00 *
Prices incl. 19% VAT plus shipping costs
in stock
25084-1.jpg
Heat protection hose velcro, silver, 13mm
PTP Heat Protection Tubing creates a thermal barrier between your hoses, wires and cables and the high temperature areas around them. PTP hoses feature an aluminized metal layer on top of a layer of strong, tightly woven fiberglass...
Order number: 25084
€45.00 *
Prices incl. 19% VAT plus shipping costs
in stock
25086-1.jpg
Heat protection hose velcro, silver, 20 mm
PTP Heat Protection Tubing creates a thermal barrier between your hoses, wires and cables and the high temperature areas around them. PTP hoses feature an aluminized metal layer on top of a layer of strong, tightly woven fiberglass...
Order number: 25086
€49.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Halter für Schwerkraftventil - Tankentlüftung - Komplett Set
Holder for gravity valve - tank ventilation - complete set, PVC transparent
Holder for gravity valve - tank ventilation - complete set This holder is located in the rear wheel arch on the right-hand side. Due to the fact that the holder is not particularly good at splashing water, which forms when driving in the...
Order number: 22128
€48.15 *
Prices incl. 19% VAT plus shipping costs
in stock
50023-mk1garage-01.jpg
Holder for gravity valve - tank ventilation - complete set, Rubber steel flex sheathed
Holder for gravity valve - tank ventilation - complete set This holder is located in the rear wheel arch on the right-hand side. Due to the fact that the holder is not particularly good at splashing water, which forms when driving in the...
Order number: 22128-1
€58.30 *
Prices incl. 19% VAT plus shipping costs
in stock
50024-2021-01.jpg
Hoses for tank ventilation - PVC transparent
Set with two hoses for tank ventilation. These are cut to the right length and only need to be placed on the tank as well as the gravity valve are attached. You can also get this item in a complete set! The hoses are available in 2...
Order number: 22382
€18.15 *
Prices incl. 19% VAT plus shipping costs
in stock
50024-2021-01.jpg
Hoses for tank ventilation - Rubber steel flex sheathed
Set with two hoses for tank ventilation. These are cut to the right length and only need to be placed on the tank as well as the gravity valve are attached. You can also get this item in a complete set! The hoses are available in 2...
Order number: 22382-1
€28.36 *
Prices incl. 19% VAT plus shipping costs
in stock
8689-mk1-01.jpg
Insulation mats - for the bonnet in original quality, fit for Golf MK1
Completely self-adhesive! The adhesive layer is protected on the back with a removable film. Significantly reduces the noise level Flame retardant The black fleece (top) is oil and water repellent! Processing information: Processing...
Order number: 22376
€62.54 *
Prices incl. 19% VAT plus shipping costs
in stock
23733-1.jpg
Master brake cylinder, Ø 25.4mm, fits for conversion to larger brake
fits for conversion to a larger brake such as Audi S3, Porsche, etc.. or to increase the original brake pressure! Diameter 25.4mm Connection number 4 For vehicles without ABS
Order number: 23733
€79.00 *
Prices incl. 19% VAT plus shipping costs
in stock
MK1 Garage Bosch Kraftstoffpumpe 044 Anschlußset
MK1 Garage Bosch fuel pump 044 connection set
Connection set for e.g. Bosch fuel pump 044 to Golf 1 injector tank Set consisting of: 2 banjo bolts 2 eyelets 4 copper gaskets 1 piece fuel hose 11mm (connection of the suction side pump with fuel tank) 2 clamps Made by MK1 Garage
Order number: 8134.MK1.001
€42.37 *
Prices incl. 19% VAT plus shipping costs
in stock
MK1 Garage Kraftstoffpumpenhalter
MK1 Garage Fuel Pump bracket
Fuel pump bracket fit for Golf 1 / Golf 1 Convertible / Jetta 1 / Scirocco 1 Plug-to-play solution when converting eg. on Bosch 044 fuel pump This bracket is attached to the rear of the tank on an existing body bolt. Made by MK1 Garage
Order number: 8133.MK1.001
€32.64 *
Prices incl. 19% VAT plus shipping costs
in stock
MK1 Garage Halter für Kraftstofffilter komplett Set, passend für Golf I
MK1 Garage Halter für Kraftstofffilter komplett Set, passend für Golf I
In diesem Set befindet sich alles was du benötigst um den Kraftstofffilter problemlos in dein System zu integrieren. Der Kraftstoffschlauch ist bereits vorgeschnitten , alles was du tun musst ist den Halter und Filter zu montieren und...
Order number: 17006
€63.79 *
Prices incl. 19% VAT plus shipping costs
in stock
MK1 Garage Halter für Kraftstofffilter
MK1 Garage Holder for Fuel filter
When converting to another engine or another fuel pump, it is advisable to install a better fuel filter. The holder can be Plug & Play on two original body bolts installed. Simply screw on, install and connect filters! Plug & Play...
Order number: 14609
€31.65 *
Prices incl. 19% VAT plus shipping costs
in stock
MK1 Garage Kraftstoffpumpenhalter Gummigelagert (Geräuscharm) passend für Golf I+Cabrio
MK1 Garage Kraftstoffpumpenhalter Gummigelagert (Geräuscharm) passend für Golf I+Cabrio
Kraftstoffpumpenhalter passend für Golf I+Cabrio, Jetta I, Scirocco 1 Plug an Play Lösung bei Umbau z.B. auf Bosch 044 Benzinpumpe Dieser Halter wird hinten beim Tank an einem vorhandenen Karosseriegewindebolzen befestigt Bei lauten...
Order number: 17007
€41.37 *
Prices incl. 19% VAT plus shipping costs
MK1 Garage Schaltknauf
MK1 Garage Schaltknauf
Klassisches Golf-Ball Design Aluminium universal passend Hersteller MK1 Garage
Order number: 14608
€21.32 *
Prices incl. 19% VAT plus shipping costs
in stock
70008-03.jpg
Oil pan with connection for return from turbo & oil separator
Oil pan with connection for return from turbo & oil separator Plug&Play oil pan that fits easily on the 827 block additionally this oil pan has a side inlet to connect the return line from the oil separator connection is adjustable and...
Order number: 23098
€89.00 *
Prices incl. 19% VAT plus shipping costs
in stock
70006.jpg
Ölkühler-Kit 10-Reihen mit AN10 Dash Anschlüssen
Ölkühler-Kit 10-Reihen mit AN10 Dash Anschlüssen Die Aufgabe des Ölkühlers ist, wie der Name bereits sagt, die Kühlung des Schmieröls im Motor deines Kraftfahrzeugs. Er sorgt auf diese Weise zusammen mit dem Kühlwassersystem für ein...
Order number: 24405
€139.00 *
Prices incl. 19% VAT plus shipping costs
in stock
25870-1.jpg
Rabbit Racing - Oil cooler bracket Plug&Play, fits for Golf MK1
Rabbit Racing - Oil cooler bracket Plug&Play fits for: Golf MK1 Golf MK1 Convertible Caddy MK1 Jetta MK1 Scirocco MK1 + MK2 The bracket is powder-coated in black and is supplied with the screws required to mount the oil cooler. Scope of...
Order number: 25870
€89.00 *
Prices incl. 19% VAT plus shipping costs
25380-1.jpg
Rabbit Racing Aluminum Radiator, 525x322mm
Rabbit Racing Aluminum Radiator 525x322mm Water cooler made of aluminum for better cooling properties. The cooler is arranged like the series cooler a plug & pay exchange is easily possible. Because the radiator is made of full aluminum...
Order number: 25380
€149.00 *
Prices incl. 19% VAT plus shipping costs
25874-1.jpg
Rabbit Racing fuel pressure gauge 0-11 bar
Rabbit Racing fuel pressure gauge 0-11 bar The set contains various adapters, so it is possible to adapt the gauge directly in the fuel line. Dash 6 connections or simple 8mm hose connections. The holder for the gauge as well as the...
Order number: 25874
€34.50 *
Prices incl. 19% VAT plus shipping costs
in stock
Kühlerabdeckung mit Hochleistungslüfter
Radiator cover with high-performance fan
Radiator cover with high-performance fan perfect fit for all coolers with a mount of 560 mm (see picture 5) Engine codes: DX, KT, JH, 2H, PF, EG, EM, PB, EV, RH, RP, JP, ME the sheet metal is available in black powder-coated
Order number: 20008
€172.98 *
Prices incl. 19% VAT plus shipping costs
1 From 2
Viewed