Jetta + Vento + Bora - front axle + steering

Spurstange-Lenkung
Novelties
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 3
No results were found for the filter!
in stock
24424.jpg
Order number: N 904 840 03
€10.20 *
Prices incl. 19% VAT plus shipping costs
in stock
01801.JPG
Anbausatz zur Befestigung des vorderen Federbeins, passend für Golf, Polo, Jetta etc.
Komplettsatz zum Anbauen für ein Federbein rechts oder links Passend für: Passat B3/B4 Polo III Golf III Jetta II Golf II Vento Caddy II Corrado 53i
Order number: N 10174001
€13.80 *
Prices incl. 19% VAT plus shipping costs
in stock
Sicherungsblech für Querlenker / Führungsgelenk
Order number: 407.191.175
€2.13 *
Prices incl. 19% VAT plus shipping costs
in stock
Führungsgelenk / Traggelenk 17mm, passend für z.B. Golf II
Ball Joint, Front Lower Left or Right
fit for Golf II + Jetta II year 1984-87
Order number: 407 191 365
€9.99 *
Prices incl. 19% VAT plus shipping costs
in stock
Lagerung Lenkgetriebe, passend für Golf III, nur für Fahrzeuge mit TRW Lenkgetriebe
Bearing steering gear, fits for Golf III with TRW power steering
passend für: Golf III/Vento GolfIII/IV Caddy II Polo III (Classic/Variant)
Order number: 422.1H0.884
€8.19 *
Prices incl. 19% VAT plus shipping costs
in stock
Befestigungsschelle, für Servo-Lenkgetriebe
Befestigungsschelle, für Servo-Lenkgetriebe
passend für: Golf III / Vento Golf III/IV Cabrio Golf II / Jetta II (nur ZF-Servolenkung) Corrado VR6 Caddy II Golf IV Cabrio Passat B3 + Syncro Passat B4 + Syncro Polo Classic / Variant länge 119 mm breite 86 mm höhe 16 mm
Order number: 422.1H0.875 A
€19.49 *
Prices incl. 19% VAT plus shipping costs
Halter für Stabilisatorlagerung, vorne, passend für Bora, Golf IV, New Beetle, NOS
Bracket for stabilizer bearing, front, fits for, Bora Golf MK4, New Beetle, NOS
Bracket for stabilizer bearing front fits for Bora (10/98 - 05/05) Golf MK4 (08/97 - 06/06) New Beetle (01/98 - 10/10) NOS Original part number serves for comparison: 1J0 411 336 D
Order number: 411 1J0 336 D
€1.93 *
Prices incl. 19% VAT plus shipping costs
in stock
Anschlagpuffer für Stoßdämpfer, passend für Golf + Polo + Passat, NOS
Bump stop for shock absorber, fits for Golf + Polo + Passat, NOS
fits for: Bora sedan, 1J2, 1390-2792, 68-204 hp Bora Variant, 1J6, 1390-2792, 75-204 hp Caddy MK2 Pickup, 9U7, 1598-1896, 64-75 hp Golf MK3 hatchback, 1H1, 1390-2792, 60-174 hp Golf MK3 Variant, 1H5, 1896-1984, 90-115 hp Golf MK4...
Order number: 412.357.303 F
€3.61 *
Prices incl. 19% VAT plus shipping costs
in stock
Hinteres Gummilager für Querlenker, vorn
Bush for front wishbone (rear)
fit for Golf II + III Jetta II Vento Coraddo
Order number: 407.191.181 D
€6.62 *
Prices incl. 19% VAT plus shipping costs
Lager- und Montagesatz für Stabilisator vorne, Halter Edelstahl, passend für Golf I
Bushes and mounting Kit,Stainles Steel, for front anti-roll-bar, fit Golf MK1
Set consisting of: 2x clamp for stabilizer inside, stainless steel 2x clamp for stabilizer outside, stainless steel 2x rubber bearing stabilizer inside 2x rubber bearing stabilizer outside 6x nut 6x washer fits for Golf I, Jetta I, Caddy...
Order number: 16546
€53.95 *
Prices incl. 19% VAT plus shipping costs
Kappe / Abdeckung, passend für Golf, Bora, Beetle, Jetta, Polo, NOS
Cap / cover, fits for Golf, Bora, Beetle, Jetta, Polo, NOS
Cap / cover fits for Golf MK4 (1998 - 2009) Bora (1999 - 2005) Beetle (2002 - 2010) Beetle Cabrio (2003 - 2010) Jetta (2006 - 2011) Polo 6R (2010 - 2012) NOS Original part number for comparison: 1J0 412 359
Order number: 412 1J0 359
€7.69 *
Prices incl. 19% VAT plus shipping costs
in stock
Kronenmutter für Spurstangenkopf, passend für alle Modelle ab 68
Castle nut for tie rod end, fits for all models from 68
M 12 x 1,5 fits for Type 1 (from VIN 118 857 240) Type 14 & 147 (from VIN 148 857 240) Type 181 Bus T2 & T3 Type 3 & 34 Type 4 K 70 LT (1. generation) Golf MK1 Jetta MK1 Caddy MK1 Scirocco MK1 original quality
Order number: N 011 212 2
€2.41 *
Prices incl. 19% VAT plus shipping costs
in stock
Nabendeckel für Stahlfelge, 80mm Durchmesser, schwarz
Center Cap for Steel Wheel, 80mm diameter, black
Nabenkappe in Satinschwarz passend für diverse Stahlfelgen 80mm Durchmesser Golf I Golf I Cabrio Jetta I Jetta II Passat Typ 32/33 und Passat 32B Santana Polo 86 Polo 86C
Order number: 601.321.171 A
€10.49 *
Prices incl. 19% VAT plus shipping costs
in stock
Haltebügel für Lenkgetriebe, passend für Golf I + Golf I Cabrio
Clamp, Steering Rack, fits for Golf MK1 +MK1 Cabrio
two required per vehicle fits for: Golf MK1 Golf MK1 Cabrio
Order number: 419.171.875
€15.80 *
Prices incl. 19% VAT plus shipping costs
Koppelstange für Stabilisator, vorne, passend für Golf III / Vento
Connecting link for stabilizer, front
passend für Golf III / Vento nur GTI und VR6 Corrado VR6
Order number: 411.535.315
€12.23 *
Prices incl. 19% VAT plus shipping costs
in stock
412171359A-2.jpg
Dome cap, cap for strut bearing, top, fits for Golf + Scirocco
Dome cap cap for strut bearing top fits for: Golf MK1, 06/77-08/83 Golf MK1 Convertible, 01/79-07/93 Golf Caddy, 10/82-07/92 Jetta MK1, 08/79-10/83 Scirocco MK1, 06/77-12/80 Scirocco MK2, 04/81-07/92
Order number: 412 171 359 A
€4.29 *
Prices incl. 19% VAT plus shipping costs
Staubschutzkappe vorn, passend für Golf
Dust cover for Front strut, Golf I-III
fit for Golf I + II +III Jetta I+ II Vento Scirocco I + II
Order number: 412.357.135
€2.81 *
Prices incl. 19% VAT plus shipping costs
in stock
Exzenterschraube zur Befestigung des vorderen Federbeins, passend für Golf I
Eccentric Bolt for Front Strut Housing, fit for Golf MK1
fits for: Caddy, 83-92 Golf MK1, 75-84 Golf MK1 Cabrio, 79-93 Jetta MK1, 79-84 Scirocco MK1 + MK2, 74-92
Order number: 407.171.265
€18.49 *
Prices incl. 19% VAT plus shipping costs
in stock
Exzenterscheibe, für vordere Federbeinbefestigung
Excentric Washer, priced each
Eccentric disc for front suspension strut attachment fits for both sides fits for: Caddy I Golf I Jetta I Scirocco I+II OE Number: 171407267 Made by Werk34
Order number: 407.171.267
€2.49 *
Prices incl. 19% VAT plus shipping costs
422161893A.jpg
Expansion hose for power steering, suitable for Golf I + Cabrio and Golf II
Suitable for all Golf I (incl. Cabrio) and Golf II with hydraulic steering gear. Elaborate replica after original templates, 100% accurate fit. Material NBR with throttle and galvanized pipe parts ( like original ) Pipe with protective...
Order number: 422 161 893 A
€231.70 *
Prices incl. 19% VAT plus shipping costs
in stock
Augenschraube an Servopumpe
Eye Bolt for the Power Steering Pump Support
fit for: Corrado, 89-95 Golf MK1+MK2, 82-92 Golf MK1 Cabrio, 82-93 Jetta MK1+MK2, 82-92 LT, 83-96 Passat, 81-93 Scirocco, 82-92
Order number: 145.035.541
€19.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Schraubensatz "Exzentrisch" für Federbein vorne, passend für Golf I
Fixing Kit for Front Suspension, fit for Golf MK1
Set Including Eccentric Screw Screw 2x Washer Eccentric Washer 2x Nut
Order number: 16544
€30.45 *
Prices incl. 19% VAT plus shipping costs
in stock
Verschlussdeckel für Gelenkflansch
Flange Cup Seal
fits for: Golf MK1, MK2, MK3 and MK4 Jetta MK1 and MK2 Vento Polo 6N Passat Beetle Karmann Ghia Tubing 181 Bus T4
Order number: 517 113 289 B
€5.89 *
Prices incl. 19% VAT plus shipping costs
in stock
Lager Stabi Stabilisator Buchse innen 17mm, passend für Golf II, Corrado etc.
Front Anti Roll Bar Mount Inner
fit for Golf MK2 Golf MK3 Jetta MK2 Vento Corrado Polo 6N
Order number: 411.191.314
€2.95 *
Prices incl. 19% VAT plus shipping costs
Vorderachs Kreuzstrebe "X-Frame"
Front axle cross brace X-Frame
Front axle cross brace X-Frame With our front axle cross brace, the front and rear wishbone points are connected to one another. This creates an additional rigidity of the frame which has a positive effect on the driving characteristics...
Order number: 20993
€261.45 *
Prices incl. 19% VAT plus shipping costs
22276-1.jpg
Front Axle Cross Brace X-Frame for 02M 6 Speed Transmission
Front Axle Cross Brace X-Frame for 02M 6 Speed Transmission With the front axle cross brace, the front and rear wishbone points are connected to each other. This creates an additional stiffness of the frame which has a positive effect on...
Order number: 22276
€271.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Federwegsbegrenzer vorn, passend für Golf I
Front suspension bump stop, fits for Golf MK1
front suspension bump stop fits for: Golf MK1 Jetta MK1 Scirocco MK1 made by WERK34
Order number: 412.171.303 C
€3.00 *
Prices incl. 19% VAT plus shipping costs
in stock
412171341A-222.jpg
Front Suspension Upper Spring Retaining Cup, fits for Golf MK1 from 08/78
fits for: Golf MK1 Golf MK1 Convertible unit Price Made by WERK34
Order number: 412.171.341 A
€17.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Federteller, vorne, oben
Front Top Spring Plate / Seat
fit for Golf MK2 Jetta MK2 Golf MK3 -1995 (will not fit VR6)
Order number: 412.191.341
€6.69 *
Prices incl. 19% VAT plus shipping costs
in stock
407191615.jpg
Order number: 407.191.615
€15.60 *
Prices incl. 19% VAT plus shipping costs
g2109.jpg
G60 steering knuckle, front left
Fits: Golf 2 Jetta 2 Golf 3 Corrado Vento Caddy 2
Order number: 407 357 255 C
€79.00 *
Prices incl. 19% VAT plus shipping costs
g2110.jpg
G60 steering knuckle, front right
Fits: Golf 2 Jetta 2 Golf 3 Corrado Vento Caddy 2
Order number: 407 357 256 C
€79.00 *
Prices incl. 19% VAT plus shipping costs
in stock
IMG_6517-3.jpg
Hexagon head screw M12x1,5x90
Hexagon head screw e.g. for fixing the wishbone at: Golf MK1 Golf MK1 Convertible Caddy Jetta MK1 10.9 Made in Germany
Order number: N 0101904
€4.90 *
Prices incl. 19% VAT plus shipping costs
in stock
IMG_6520-3.jpg
Hexagon head screw M7x20mm
Hexagon head screw e.g. for fixing the suspension joint at: Golf M^K1 etc.
Order number: N 0402043
€1.49 *
Prices incl. 19% VAT plus shipping costs
in stock
Nabendeckel / Felgendeckel, 150mm Durchmesser
Hub Cab / Center Cab 150mm dameter
Center Capfor Sport Aloy Wheel Diamter 150mm Plastic silver
Order number: 601.191.149 BS
€21.72 *
Prices incl. 19% VAT plus shipping costs
in stock
601321171C-03.jpg
Hub cover 58mm fit for for various VW alloy wheels
center wheel For various VW aluminum rims e.g. Golf I GTI light-alloy wheels Diameter 58 mm
Order number: 601.321.171 C
€6.99 *
Prices incl. 19% VAT plus shipping costs
in stock
Isolierbuchse unter Pralltopf/Hupenknopf
Insulating Bush for Steering Wheel
passend für: Typ 3 Golf I Käfer Karmann Ghia Typ 14 Passat I Scirocco I+II Jetta I
Order number: 419 321 779 A
€5.56 *
Prices incl. 19% VAT plus shipping costs
NEW
in stock
20mm-4.jpg
Lowering dome bearing with unibal joints for the front axle, 20mm
Lowering dome bearing with unibal joints for the front axle fits for: Scirocco MK1 + MK2 all Golf MK1 + Convertible Jetta MK1 Caddy 14D with coilover suspension High-strength stainless steel Unibal joints from German motorsport...
Order number: 26105
€289.00 *
Prices incl. 19% VAT plus shipping costs
NEW
in stock
40mm-4.jpg
Lowering dome bearing with unibal joints for the front axle, 40mm
Lowering dome bearing with unibal joints for the front axle fits for: Golf MK1 Golf MK1 Convertible Jetta MK1 Caddy 14D with coilover suspension High-strength stainless steel Unibal joints from German motorsport production Powder coating...
Order number: 26104
€369.00 *
Prices incl. 19% VAT plus shipping costs
in stock
25669-1.jpg
LUISI Mirage Race RS sports steering wheel suede black, cupped, with TÜV
LUISI Mirage Race RS sports steering wheel suede black cupped with TÜV
Order number: 25669
€319.99 *
Prices incl. 19% VAT plus shipping costs
25670-1.jpg
LUISI Mirage Race RS sports steering wheel suede black, cupped, with TÜV
LUISI Mirage Race RS sports steering wheel suede black cupped with TÜV
Order number: 25670
€319.99 *
Prices incl. 19% VAT plus shipping costs
in stock
25673-1.jpg
LUISI steering wheel hub, TÜV-compliant deformable, 6x74mm/6x70mm
LUISI steering wheel hub TÜV-compliant deformable 6x74mm 6x70mm fits for: Jetta, 1982-08/1988 Steering wheels with 6x74mm and 6x70mm bolt circle can be installed Special TÜV test reports have been prepared for our Luisi sports steering...
Order number: 25673
€95.99 *
Prices incl. 19% VAT plus shipping costs
in stock
Gummilager für Lenkgetriebe, links, nur für Fahrzuge mit Servolenkung
Mounting for steering gear, left side, only for cars with powersteering
only fit for cars with pwersteering only fit for the LEFT Side fit for : Golf MK1 Golf MK1 Cabrio, 1982-93 Jetta MK2 Scirocco MK1 + MK2, 1982-92
Order number: 422.175.883
€12.99 *
Prices incl. 19% VAT plus shipping costs
in stock
412191329.JPG
Mounting kit for front strut, suitable for Golf II & Jetta
Mounting kit consisting of: Strut mount Dust cap Spring travel limiter Threaded sleeve for strut mount 2 sets are required per vehicle.
Order number: 412 191 329
€26.00 *
Prices incl. 19% VAT plus shipping costs
in stock
23822.JPG
Mounting kit for wishbones, fits Golf I, Jetta I, Caddy I, Scirocco
fits: Golf I Type 17 Jetta I Type 17CK Caddy I Type 14 Scirocco I+II Type 53/53B
Order number: 23822
€35.60 *
Prices incl. 19% VAT plus shipping costs
419171517-01.jpg
Needle bearing on steering column, below
fits for Golf MK1 - 1975-83 Golf MK1 Convertible - 1979-93 Scirocco - 1974-92 Jetta 1979-83 For vehicles with and without power steering Inner diameter approx. 28.5 mm Outside diameter approx. 38.7 mm Height 18 mm
Order number: 419.171.517
€73.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Mutter (selbstsichernd) für Antriebswelle
Nut (self-locking) for drive shaft
fits for: Golf/Jetta, 1.0-1.8 (incl. D), 02/74-10/91 Golf/Vento, 1.4-2.0 (incl. D), 11/91-09/97 Golf/Vento Automatik, 2.0, 11/91-05/96 Passat, 1.5-1.9D, 08/77-09/96 Passat/Santana, 1.3-2.2, 06/74-09/96 Polo/Derby, 0.8-1.4 (incl. D),...
Order number: 407.171.643 A
€2.95 *
Prices incl. 19% VAT plus shipping costs
in stock
Mutter für Lenkrad M16x1,5
Nut for steering wheel M16x1,5
Nut for attachment of the steering wheel to the steering column.
Order number: N 905 500 02
€3.36 *
Prices incl. 19% VAT plus shipping costs
1 From 3
Viewed