Golf MK II - Engine 1.05-1.3 HZ, NZ, MH 2G
Novelties
No results were found for the filter!
in stock
Expansion bottle with sensor, fits for Golf MK2 + MK3 + MK4 etc.
Coolant expansion tank with sensor fits for: Golf/Jetta/Vento, 1.0-2.0 (incl. D), 08/89-09/97 Passat, 1.6-2.0 (incl. D), 04/88-09/96 Polo, 1.0-1.4 (incl. D), 10/90-07/94 Made by WERK34
Aluminum expansion tank - polished
Do you want to visually upgrade your engine compartment? We have a very elegant, polished expansion tank here. Dimensions : (See also picture no.2) Width 150mm Height 170mm Height including lid 200mm Depth 100mm Connections : Outlet from...
Ausgleichsbehälter mit Geber und Montagematerial
Set bestehend aus Ausgleichsbehälter mit Geber sowie Montagematerial
in stock
in stock
Cap for cooling water tank
suitable for Golf 1.0-1.8 (also Diesel) 6/75-7/89 Jetta 1.0-1.8 (also Diesel) 6/75-7/89 Polo 0.9-1.3 (also Diesel) 9/75-9/90 Derby 0.9-1.3 (also Diesel) 9/75-9/90 LT 2.4 12/82-12/95
in stock
Coolant hose, 7mm x 2.5mm, 110cm length
e.g. between radiator and expansion tank at Golf Made by WERK34
in stock
in stock
Cover for water leveling tank
fit for Golf/Jetta/Vento 1.0-2.8 (incl. D) 08/89-09/97 Passat 1.6-2.8 (incl. D) 04/88-09/96 Polo 1.0-1.9 (incl. D) 10/90-09/01 Polo Classic 1.4-1.9 (incl. D) 11/95-09/01 VW T4 1.8-2.8 (incl. D) 06/92
in stock
Gasket in the Bulkhead for the Heater Matrix Pipes
fit for: Golf MK2 1984-92 Golf MK3 + Convertible 1992-2002 Golf MK4 1998-2006 Bus T4 1991-2003 Jetta 1984-92 Vento 1992-98 Corrado 1989-95
in stock
Heater Matrix, Golf II + III + IV etc.
fit for Golf/Bora 1.4-2.3 (incl. D) 10/97-09/98 Golf/Jetta 1.0-1.8 (incl. D) 08/83-10/91 Golf/Vento 1.4-2.8 (incl. D) 11/91-09/97 Lupo/Seat Arosa (nicht AVY/BBY) 1.0-1.7 (incl. D) 02/97- New Beetle 1.8-2.0 (incl. D) 01/98-07/98 Passat...
in stock
in stock
in stock
in stock
in stock
in stock
in stock
Mounting rubber washer for radiator/running board
Washer between Radiator and Body fit for Golf MK1 Golf MK1 Convertible Golf MK2 Jetta MK1 Jetta MK2 Scirocco MK1 Scirocco MK2 Bus T3 Washer between Runing board and wing fit for all Beetle Washer on bumper corners Bus T2a
in stock
O-Ring 42.5x3
fit for Thermostat housing Engine Code HZ, NZ, RC, MH, NU, ABU, ABD Air Filter / Turbo
in stock
in stock
in stock
Ölkühler-Kit 10-Reihen mit AN10 Dash Anschlüssen
Ölkühler-Kit 10-Reihen mit AN10 Dash Anschlüssen Die Aufgabe des Ölkühlers ist, wie der Name bereits sagt, die Kühlung des Schmieröls im Motor deines Kraftfahrzeugs. Er sorgt auf diese Weise zusammen mit dem Kühlwassersystem für ein...
Racing thermostat - 71° opening temperature
The racing thermostat fits into all G60 / 16V engines and original Golf I engines. Due to its lower activation temperature, it significantly reduces the engine temperature. When the engine is fully warmed up, the thermostat opens at a...
in stock
in stock
Radiator Fan & Motor, 250/150 W, 280mm
passend für Golf 08/80-10/91, 1.0-1.8 (inkl. D) Passat 01/81-07/86, 1.3-2.2 (inkl. D) Polo 10/81-07/90, 0.9-1.3 (inkl. D)
in stock
Radiator fan switch boot 2 terminal
amoung other things used for supply (flat contact housing) radiator fan - thermo switch, headlight cleaning system, etc. Fits for: Caddy from 1983-92 Golf I and II Golf I Cabrio Scirocco I and II VW Polo / Derby VW Bus T3 made by WERK34
in stock
Radiator Fan, 2 Speed 100W/60W 280mm
suitbale for Golf (nicht G60) 02/74-10/91, 1.0-1.8 Jetta (nicht G60) 02/74-10/91, 1.0-1.8 Passat 01/78-03/88, 1.3-1.8 Passat (EZ, AAM, RP, ABN) 04/88-10/93, 1.6-1.8 Polo 08/75-08/99, 0.9-1.9 SDI Scirocco 02/74-07/92, 1.1-1.8
in stock
radiator hose, heat exchanger, feed
MODEL MOTOR BAUJAHR Golf/Jetta (40-82 kW) 1.6-1.8 (incl. D) 8/83-10/91 Passat 1.6 8/88-7/90 Passat 1.8 4/88-7/90 Passat 1.8 8/92-10/93
in stock
radiator hose, heating, return
MODEL MOTOR BAUJAHR Golf/Jetta (carb.) 1.0 10/85-10/91 Golf/Jetta (carb.) 1.3 08/85-10/91 Golf/Jetta (inj.) 1.3 02/87-10/91
in stock
Radiator, 430x322 mm
fit for Golf + Jetta 1.0-1.3 year 8/83-10/91 Polo + Derby 1.1-1.3 year from 8/82 Scirocco 1.3 year 8/83-7/90
in stock
Sealing plug for temperature sender in coolant flange, suitable for various vehicles
Fits for: Golf I + Convertible Golf II Golf III + Convertible Golf IV Vento Jetta Scirocco Corrado Polo 6N Caddy Bus T4 Bus T5
in stock
Sealing ring for coolant temperature sender
Features: Thickness/Thickness [mm]: 3.5mm Inner diameter [mm]: 20mm Material: NBR (Nitrile Butadiene Rubber) Weight [kg]: 0.003
Square readiator/expansion tank, with bore for electrical sender
fits for: Golf 37-63kW 1.1-1.6 Bj.2/74-12/75 Golf + Jetta 33-66kW 1.0-1.8 Bj. 1/83-7/89 Golf + Jetta 81-82kW 1.6-1.8 Bj. 6/76-10/82 Golf + Jetta 37-51kw 1.5-1.6 Diesel Bj. 8/76-10/82 Made by WERK34
in stock
in stock
Thermostat housing
Engine HZ, MH, NU + 2C fit for Golf/Jetta 1.0-1.3 08/85-07/90 Polo 1.0-1.3 08/85-07/90
in stock
Thermostat Housing
fit for Golf/Jetta 1.0-1.3 (Vergaser) 08/90-07/92 Polo 1.0-1.3 08/90-07/94 Seat Ibiza/Cordoba 1.0-1.3 02/93-07/96
in stock
in stock
in stock
Vaccum Tank for Aircondition
fit for Corrado Golf MK2 Golf MK1 Convertible Vaccum Tank for Aircondition
in stock
in stock
in stock
Water hose
kühlwasserschlauch Golf 2 Auch Jetta 2 Polo 86C 1,05 Liter / 1,3 Liter Verbindung Thermostatgehäuse / Wasserrohr
in stock
Water hose, Thermostat-inlet manifold
fit for Golf II Engine 1.0-1.3 ( 37-40 kW) not NZ Golf III / Vento 1.4 year 11/91-07/95
in stock
Water Pump for engine 1.0-1.3
suitable for Golf (Vergaser) 1.0-1.3 Bj. 2/74-10/90 Jetta (Vergaser) 1.0-1.3 Bj. 2/74-10/90 Golf (Einspritzer) 1.3 Bj. 2/87-10/90 Jetta (Einspritzer) 1.3 Bj. 2/87-10/90 Polo 0.9-1.3 Bj. 8/74-10/90 Derby 0.9-1.3 Bj. 8/74-10/90
in stock
Waterpump
fit for Golf II + Jetta II 1.0-1.3 Bj. 10/90-1091 Golf III /Vento 1.4-1.6 BJ. 11/91-07/95 Polo + Derby 0.9-1.3 Bj. 10/90-07/94
Viewed