engine - engine bearing kits

13
Novelties
Close filters
  •  
  •  
  •  
from to
1 From 2
No results were found for the filter!
in stock
Nockenwellenlagersatz, Welle: 0.25, Gehäuse: Standard
Camshaft bearing set, shaft: 0.25, housing: standard
Manufacturer Kolbenschmidt Originalpartnumber is only used for comparison 111 198 543
Order number: 996 001 614
€38.20 *
Prices incl. 19% VAT plus shipping costs
in stock
996025604-01.jpg
Camshaft Bearing Standard
fit for: Beetle, Karmann, Type 3, Bus T1 and T2 1.2-1.6 from 08/60 Thing from 08/69 Bus T3 CT / CZ engine 1.6 Bus T3 1.9 WBX 83-07 / 85 If a double collar bearing is needed, you need two bearing sets.
Order number: 996 025 604
€20.50 *
Prices incl. 19% VAT plus shipping costs
Nockenwellenlagersatz WBX, Gehäuse: 0,5, Welle:Std
Camshaft Bearing WBX, Welle:0,25, Housing:Std
Wird ein Lagersatz mit Doppelten Bundlager benötigt, müssen Sie zwei Lagersätz bestellen.
Order number: 996 025 614
€27.29 *
Prices incl. 19% VAT plus shipping costs
8111251018.jpg
Camshaft bearings, standard, for Type 4 engines 1700 - 2000
fits for Bus T2 (engine code CA, CB, AP, CJ, GE & GD) Porsche 914 (engine code W, GB & AN) Bus T3 (engine codeCV & CU) Type 4 spare part number to compare 021 198 541 manufacturer Silverline
Order number: 975 004 604
€29.95 *
Prices incl. 19% VAT plus shipping costs
Satz Pleuellager 0,5 passend für 1,7 und 1,8
Order number: 976 002 620
€24.01 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Pleuellager 0,25 passend für 2,0
Order number: 580 004 620
€42.27 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Pleuellager 0,25 passend für 2,0
Order number: 580 004 630
€42.69 *
Prices incl. 19% VAT plus shipping costs
Satz Pleuellager 0,25 passend für 2,0
Order number: 580 004 610
€38.20 *
Prices incl. 19% VAT plus shipping costs
Satz Pleuellager 0,25 passend für 2,0
Connectiong Rod Bearing Set, Standard, fit for 2,0
Erstausrüsterqualität mit Stahlkern
Order number: 580 004 600
€42.90 *
Prices incl. 19% VAT plus shipping costs
in stock
105111593-20.jpg
Crankshaft bearing no. 4, standard size, fits 25 & 30 HP engines
standard size (shaft) 50,5mm outer dimension (1. oversize) original spare part, NOS single item
Order number: 105 111 593
€14.19 *
Prices incl. 19% VAT plus shipping costs
in stock
Paßstift für Kurbelwellenlager
Dowel pin for crankshaft bearings
! ATTENTION: 5 pieces of this article are required!
Order number: 101 111 123
€1.00 *
Prices incl. 19% VAT plus shipping costs
in stock
Kurbelwellenlagersatz 18 KW/30 PS, Welle: 0.5, Gehäuse: 0,5 mm
Order number: 198 111 455 OS
€83.25 *
Prices incl. 19% VAT plus shipping costs
977004710-01.jpg
Main Gearing Set 1,7 1,8 2,0 Housing: 0,5 crankshaft: 0,25
Manufacturer Mahle fit for Bus T2 1972-79 Bus T3 1980-83
Order number: 977 004 710
€73.14 *
Prices incl. 19% VAT plus shipping costs
Kurbelwellenlagersatz 1,7 1,8 2,0 Gehäuse: Std, Welle: 0,5
Order number: 977 004 620
€96.23 *
Prices incl. 19% VAT plus shipping costs
Kurbelwellenlagersatz 1,7 1,8 2,0 Gehäuse: Std, Welle: 0,5
Order number: 977 004 610
€96.23 *
Prices incl. 19% VAT plus shipping costs
in stock
Kurbelwellenlagersatz 18 KW/30 PS, Welle: 0.5, Gehäuse: 0,5 mm
Main Gearing Set, 18 kW/30 PS, Welle: 0.5 , Housing: 0,5 mm
for 18KW/25HP and 22KW/30HP Beetle, Karmann Ghia 1.2 -12.62 Bus T1 1.2 -12.62 Crankcase : 0.50mm 1. oversize Crankshaft : 0.50mm 2. undersize Bearing collar: 24.00mm STD
Order number: 198 111 455 GH
€62.54 *
Prices incl. 19% VAT plus shipping costs
in stock
Kurbelwellenlagersatz, passend bis 18/22 kW (25/30 PS), Welle: Std, Gehäuse: 0,5 mm
Main Gearing Set, until 18/22 kW (25/30 PS), Welle: Std, Housing: 0,5 mm
suitable for: Beetle Karmann Ghia Typ 3 Bus
Order number: 198 111 451 GH
€70.28 *
Prices incl. 19% VAT plus shipping costs
in stock
Hauptlagersatz, Gehäuse: 0.5, Welle: 0.5, Bund: 20
Order number: 978 001 713
€43.66 *
Prices incl. 19% VAT plus shipping costs
in stock
Hauptlagersatz, Gehäuse: 0.5, Welle: 0.5, Bund: 20
Order number: 978 001 720
€43.66 *
Prices incl. 19% VAT plus shipping costs
Hauptlagersatz, Gehäuse: 0.5, Welle: 0.5, Bund: 20
Order number: 978 001 710
€43.66 *
Prices incl. 19% VAT plus shipping costs
Hauptlagersatz, Gehäuse: 0.5, Welle: 0.5, Bund: 20
Master Bearing, Housing: 1, Welle, Sts, Bund: Std
Gehäuse zweites Übermaß + 1mm Welle Std Bund Std
Order number: 732 001 800
€53.48 *
Prices incl. 19% VAT plus shipping costs
in stock
Hauptlagersatz, Gehäuse: 0.5, Welle: 0.5, Bund: 20
Order number: 978 001 820
€43.66 *
Prices incl. 19% VAT plus shipping costs
Hauptlagersatz, Gehäuse: 0.5, Welle: 0.5, Bund: 20
Order number: 978 001 810
€43.66 *
Prices incl. 19% VAT plus shipping costs
in stock
Hauptlagersatz, Gehäuse: 0.5, Welle: 0.5, Bund: 20
Order number: 978 001 620
€44.72 *
Prices incl. 19% VAT plus shipping costs
Hauptlagersatz, Gehäuse: 0.5, Welle: 0.5, Bund: 20
Master Bearing, Housing: Std, Welle: Std, Bund: Std
65,00mm Außen-Ø Standard Gehäusemaß Standard Kurbelwellenmaß Standard Lagerbund passend für Käfer (ab Motor-Nr. 5 000 001) Karmann Ghia (ab Motor-Nr. 5 000 001) Typ 147 "Fridolin" (ab Motor-Nr. 5 000 001) Bus T1 (ab Motor-Nr. 3 400 000)...
Order number: 978 001 600
€43.66 *
Prices incl. 19% VAT plus shipping costs
in stock
Hauptlagersatz, Gehäuse: 0.5, Welle: 0.5, Bund: 20
Order number: 978 001 723
€43.66 *
Prices incl. 19% VAT plus shipping costs
in stock
Pleuellager, 18/22 kW (25/30 PS), 8 Stück, 0.25 mm Käfer
Order number: 105 111 707
€32.64 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Pleuellager, 18/22 kW (25/30 PS), 0.50 mm Käfer
Piston Rod Bearing 18/22 kW (25/30 PS) 8 Piece 0,50
18-22 kW (25-30 PS) 0,50 mm suitable for Beetle Bus T1 Bus T2 Karmann Ghia Type 14 Karmann Ghia Type 34 181 Thing Type 3 Fridolin 147
Order number: 105 111 713
€32.64 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Pleuellager, 0.75 mm, passend für 18/22 kW (25/30 PS) Käfer
Order number: 105 111 719
€32.64 *
Prices incl. 19% VAT plus shipping costs
in stock
Pleuellager 18/22 kW (25/30 PS), 8 Stück Standard Käfer
Order number: 105 111 701
€32.64 *
Prices incl. 19% VAT plus shipping costs
Satz Pleuellager, 25 bis 37 kW (34 bis 50 PS) 1.2, 1.6 & WBX, 0.50 mm Käfer
Piston Rod Bearing 25-37 kW (34-50 PS) 1,2/1,6 + WBX 8 Piece
25-37 kW (34-50 PS) 1,2/1,6 WBX 8 Piece
Order number: 998 001 620
€15.71 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Pleuellager, 25 bis 37 kW (34 bis 50 PS) 1.2, 1.6 & WBX, 0.75 mm Käfer
Piston Rod Bearing 25-37 kW (34-50 PS) 1,2/1,6 + WBX, 8 Piece
25-37 kW (34-50 PS) 1,2/1,6 WBX 8 Piece
Order number: 998 001 630
€15.71 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Pleuellager -0,25mm, passend für 25-37 kW (34-50 PS) 1,2-1,6 und WBX Käfer
Order number: 976 002 600
€45.20 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Pleuellager +0,25mm, (außer 25 + 30 PS), Typ 3, CT / CZ, WBX
Rod bearing shells +0.25, type 1 engines & WBX (from 05/60)
1st undersize not for 30HP engine except Bus T1 (from engine no. 3 400 000) fits for Beetle Karmann Ghia type 14 Bus T1 Type 3 Karmann Ghia type 34 Fridolin Type 147 Thing Type 181 Bus T2 Bus T3 original spare part for comparison 113 105...
Order number: 105 113 707
€15.65 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Pleuellager +1,00mm, (außer 25 + 30 PS), Typ 1, Typ 3, CT / CZ und WBX
Order number: 01619
€15.65 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Pleuellager +0,25mm, nur 25 + 30 PS
Rod bearings +0.25,
Fits: Type 1 engines (25+30 hp only)
Order number: 05900
€27.23 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Pleuellager +0,50mm, (außer 25 + 30 PS), Typ 3, CT / CZ, WBX
Rod bearings +0.50, Type 1 (except 25+30 hp), Type 3, CT/CZ, Water boxer engines
Fits: Type 1 (except 25+30 hp) Type 3 CT/CZ Water boxer engines Originalpartnumber: 113 105 713
Order number: 105 113 713
€16.60 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Pleuellager +0,50mm, nur 25 + 30 PS
Rod bearings +0.50, Type 1 engines (25+30 hp only)
Fits: Type 1 engines (25+30 hp only)
Order number: 05912
€27.23 *
Prices incl. 19% VAT plus shipping costs
Satz Pleuellager +0,75mm, (außer 25 + 30 PS), Typ 3, CT / CZ, WBX
Rod bearings +0.75, Type 1 (except 25+30 hp), Type 3, CT/CZ, Water boxer engines
nicht für 30PS Motoren außer Bus T1 (ab Motor-Nr. 3 400 000) passend für Typ-1-Motoren ab 34PS Typ 3 Motoren CT & CZ Motoren WBX-Motoren Ersatzteilenummer zum Vergleich: 113 105 719
Order number: 105 113 719
€15.65 *
Prices incl. 19% VAT plus shipping costs
Satz Pleuellager +0,75mm, nur 25 + 30 PS
Order number: 05946
€27.23 *
Prices incl. 19% VAT plus shipping costs
Satz Pleuellager +1,00mm, nur 25 + 30 PS
Order number: 05947
€27.23 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Pleuellager Standardgröße, (außer 25 + 30 PS), Typ 3, CT / CZ, WBX
Rod bearings standard size, Type 1 (except 25+30 hp), Type 3, CT/CZ, Water boxer engines
nicht für 30PS Motoren außer Bus T1 (ab Motor-Nr. 3 400 000) passend für Typ-1-Motoren ab 34PS Typ 3 Motoren CT & CZ Motoren WBX-Motoren
Order number: 105 113 701
€16.60 *
Prices incl. 19% VAT plus shipping costs
in stock
Satz Pleuellager, 25 bis 37 kW (34 bis 50 PS) 1.2, 1.6 & WBX, 1mm
Set Connecting Rod Bearing 25-37 kW (34-50 PS) 1,2/1,6 + WBX, 1mm
25-37 kW (34-50 PS) 1,2-1,6 WBX 1mm
Order number: 998 001 640
€15.71 *
Prices incl. 19% VAT plus shipping costs
in stock
megasilverline.jpg
Set of Crankshaft Bearings -54-57 kW (66-70 PS) 1,7/1,8/2,0
Standard = standard measure/normal measure, 0.25 = 1.Oversize and/or undersize, 0.50 = 2.Oversize and/or undersize, 0.75 = 3.Oversize and/or undersize. Further measures on request.
Order number: 977 004 600
€117.60 *
Prices incl. 19% VAT plus shipping costs
in stock
Kurbelwellenlagersatz 1,7/1,8/2,0 Gehäuse: Std, Welle Std
Set of Crankshaft Bearings WBX 1,9/2,1 08/85-
Standard = standard measure/normal measure, 0.25 = 1.Oversize and/or undersize, 0.50 = 2.Oversize and/or undersize, 0.75 = 3.Oversize and/or undersize. Further measures on request.
Order number: 412 025 601
€73.52 *
Prices incl. 19% VAT plus shipping costs
Hauptlagersatz, Gehäuse: 0.5, Welle: 0.5, Bund: 20
Set of Crankshaft Bearings-25/37 kW (34/50 PS)
Standard = standard measure/normal measure, 0.25 = 1.Oversize and/or undersize, 0.50 = 2.Oversize and/or undersize, 0.75 = 3.Oversize and/or undersize. Further measures on request.
Order number: 978 001 640
€43.66 *
Prices incl. 19% VAT plus shipping costs
in stock
Hauptlagersatz, Gehäuse: 0.5, Welle: 0.5, Bund: 20
Set of Crankshaft Bearings-25/37 kW (34/50 PS)
Standard = standard measure/normal measure, 0.25 = 1.Oversize and/or undersize, 0.50 = 2.Oversize and/or undersize, 0.75 = 3.Oversize and/or undersize. Further measures on request.
Order number: 978 001 630
€43.66 *
Prices incl. 19% VAT plus shipping costs
in stock
Hauptlagersatz, Gehäuse: 0.5, Welle: 0.5, Bund: 20
Set of Crankshaft Bearings-25/37 kW (34/50 PS)
Standard = standard measure/normal measure, 0.25 = 1.Oversize and/or undersize, 0.50 = 2.Oversize and/or undersize, 0.75 = 3.Oversize and/or undersize. Further measures on request.
Order number: 732 001 700
€43.66 *
Prices incl. 19% VAT plus shipping costs
1 From 2
Viewed