Typ 4 411 | 412
Novelties
No results were found for the filter!
in stock
Safety snap ring for drive shaft head
fits for: Beetle, Inclined control arm rear axle Typ 3, Inclined control arm rear axle Karmann Ghia, Inclined control arm rear axle Typ 34, Inclined control arm rear axle Bus T2, 1968-79 Bus T3 Golf MK1 Golf MK2
in stock
Schalter am Schaltgetriebe für Rückfahrleuchte, passend ab 08/68
passend für: Käfer Karmann Ghia Typ 181 Bus T2 Bus T3 (LBX bis 12/82) Typ 3 Wenn der Rückwärtsgang eingelegt wird sorgt der Schalter dafür, dass sich die Rückfahrleuchte einschaltet. Er wurde bei Fahrzeugen ab 08/66 (teilweise) verbaut,...
in stock
Schließplatte, an B-Säule, passend für verschiedene Modelle (ab 08/66)
passend für: Käfer (ab FIN 117 000 001 bis 111 3200 000) Typ 3 (ab FIN 317 000 001 bis 311 2500 000) Typ 34 (ab FIN 347 000 001) Typ 4 (bis FIN 411 2100 000) durch Umdrehen des Keils kann sie an der anderen Seite montiert werden kann...
in stock
Schutzfolie / Dämpfung hinter Verkleidung universal
ca. 1000x600mm transparent Mit Werkstattmitteln anpassen
in stock
Screw plug for oil pressure control piston, suitable for bus T2 & T3
Fits for: Bus T2 1.7-2.0 Baujahr 08/71-07/79 Bus T3 1.6-2.1 05/79-07/92
Script Badge "Aircooled" polished
Script badges lazer cut from stainless steel and then fully polished to a deep chrome finish. All badges have 3M outdoor tape on the back for quick and easy attachment. Dimensions approx: Height 21mm
in stock
Script Badge "Low & Slow" polished
Script badges lazer cut from stainless steel and then fully polished to a deep chrome finish. All badges have 3M outdoor tape on the back for quick and easy attachment. Dimensions approx: Height 21mm
in stock
Seal for alternator housing, fits type 4-alternators
fits for Type 4 Bus T2 original spare part, NOS few available per vehicle two pcs. are needed
in stock
Seal for oil breather, fits Type 4 engines
fits for Type 4 Bus T2 original spare part, NOS few available
in stock
Seal for tailpipe with silencer, fits Type 4 engines
43mm, for 1700ccm engines fits for: Bus T2 (engine code CA & CB) Type 4 (engine code W, Z, EB and from engine no. V 0 049 186 & up to engine no. EA 098 793) original spare part, NOS only few available
Seal ring for ignition distributor, fits various models (till 2004)
fits for Beetle Karmann Ghia 14 & 34 Type 147 Type 181 Bus T1, T2 & T3 Type 3 Type 4 K70 industrial engine original spare part
in stock
Sealing cone 43,5mm for tailpipe with damper, fits type 4 engines
fits for Bus T2 (1700ccm) Type 4 (from engine no. V 0 049 186, W/Z/EA/EB 0 000 001) original spare part, NOS only few available
in stock
Sealing ring for reversing light switch of manual gearbox (from 08/66)
A 14 x 24 x 1.5 made of aluminum later replaced by N 013 861 5 (made of copper) fits for Beetle (from VIN 117 000 001) Karmann Ghia (from VIN 147 000 001) Type 147 "Fridolin" (from VIN 147 000 001) Type 3 (from VIN 317 000 001) Type 34...
in stock
Sealing ring for wheel bearing, fits various models (05/68 to 04/00)
fits for front axle with disc brake Beetle (from VIN 118 857 239) Karmann Ghia (from VIN 148 857 239) Type 3 (from VIN 318 189 212) Type 34 (from VIN 348 189 212) Type 4 Type 181 rear axle Passat 32, 32 B & 35 i Santana Mk1 Golf Mk1, Mk2...
Series resistor for injection, fits various models (from 08/74)
fits for Beetle (with L-JETRONIC) Karmann Ghia (with L-JETRONIC) Type 4 (from engine no. EC 0 000 001) Bus T2 (from engine no. 215 2000 001) Bus T3 (from engine no. CV 0 000 001) original spare part, used single item
in stock
Set of brake pads, fits for 411/412 + Type 3 from 08/71 (complete VA)
Set of brake pads fits for: 411/412 Type 3, from 08/71 (complete VA)
in stock
Set of contact breaker points, fits various models (from 08/67)
one-piece with angled plug fits for the following ignition distributors (air cooled models) 113 905 205 P / AA / AB / AC / AD / AE / AH / A J / AK / AL / AM / AN 211 905 205 R / Q / S 311 905 205 R / L / P / S / AA / T / AB / M / AC / AD...
Set of contact breaker points, fits various models (from 08/67)
one-piece with angled plug fits for the following ignition distributors (air cooled models) 113 905 205 P / AA / AB / AC / AD / AE / AH / A J / AK / AL / AM / AN 211 905 205 R / Q / S 311 905 205 R / L / P / S / AA / T / AB / M / AC / AD...
in stock
Set of cover washers for safety cap, fits various models (08/67 to 07/92)
of the manual or automatic transmission fits for manual transmission of Bus T2 Bus T3 Type 4 fits for automatic transmission of Beetle (from VIN 118 071 440) Karmann Ghia (from VIN 148 071 440) spare part numbers for comparison: 113 301 195
Set of pushrods, fits all Boxer engines
Heads only on one side ready mounted, other sides can be brought to the appropriate length before the heads are mounted.
Set of pushrods, heavy duty, fits all Boxer engines
Heads only on one side ready mounted, other sides can be brought to the appropriate length before the heads are mounted.
in stock
Set of valve guides, 1st oversize, fits Type 4 engines & WBX
bronze alloy with high wear resistance and good fatigue and corrosion resistance for inlet valves inner dimension 7.99 mm outer dimension 12,11 mm length 61mm
in stock
Set of valve guides, 1st oversize, fits Type 4 engines & WBX
bronze alloy with high wear resistance and good fatigue and corrosion resistance for exhaust valves inner dimension 8.98mm outer dimension 13.11 mm length 66.5mm
in stock
Set of valve guides, fits Type 4 engines & WBX
bronze alloy with high wear resistance and good fatigue and corrosion resistance for inlet valves inner dimension 7.99mm outer dimension 12.06mm length 61mm standard size
in stock
Set of valve guides, for Type 4 engines & WBX
bronze alloy with high wear resistance and good fatigue and corrosion resistance for exhaust valves inner dimension 8.98mm outer dimension 13.06mm length 66.5mm standard size
Side flasher, fits Type 3 & 4
part of various M-equipment fits for Type 3 (M 278, M 46) Type 4 (M 46, M 278, M 554) nice reproduction
Silicone valve cover gasket, fits 1,7-2,0
Silicone gaskets can be used multiple times over cork gaskets.
in stock
Silver Bird Hood Emblem
Bonnet / hood emblems were a popular accessory in the 60's and this bird emblem has been inspired by a design that was available back in the day. These have been hand cast from aluminium and fully polished before being detailed to...
in stock
Single-mount antenna, black, fits for various models
Classic style antenna fits perferct for every classic Volkswagen
in stock
Single-mount antenna, chrome, fits for various models
Classic style antenna fits perferct for every classic Volkswagen
NEW
in stock
Socket for parking light, used, fits for Type 3 and Type 34
fits for Type 3 Type 34 Type 4 (M 46, M 278, M 554) Original spare part, used. Various manufacturers VW, SWF, Hella etc.
in stock
Spacer ring for 123 ignition distributor
The 123ignition ignition distributors have a universal housing, which could be pressed too deep into the crankshaft housing if not installed correctly. This spacer ring is required to create the correct distance and to avoid damage to...
in stock
Spacers 13mm, for window winders, pair
Fit for Käfer, Karmann 8.67- Bus T2 8.67-7.79 Bus T3 5.79-7.92 Typ 3 8.67-7.73 Typ 4 8.68-7.74 Golf 1 4.74-8.83 Golf 1 Cabrio 1.79-7.93 Golf 2 8.83-7.92 Polo 1, 2 4.75-7.90
in stock
Spacers for window winders complete with screw, brown, fits for Bus T2 + T3
Spacers for window winders complete with screw brown fits for: Bus T2 + T3
in stock
Spark Plug Holder
Perfect and neat looking holder to carry a spare set of four spark plugs for your vintage VW or Porsche Produced from fully polished billet aluminium and supplied with stainless steel hardware ready to mount in your engine bay. Designed...
Spark plug with heavy-duty center electrode, fits various models (08/68 to 07/92)
corresponds to BOSCH W7DCO 0.7mm electrode gap fits for Type 4, Golf, Jetta, Polo, Derby, Bus T2 & T3, Passat and others original spare part, NOS few available
Spark plug with heavy-duty center electrode, fits various models (08/68 to 07/92)
manufacturer BOSCH with copper core fits for Type 4, Golf, Jetta, Polo, Derby, Bus T2 & T3, Passat and others original spare part, NOS few available
in stock
Spring clip for door opener rod, 37.5 mm, fits from 08/66
fits for Type 1/14 (from VIN 117 000 001) Type 3/34 (from VIN 317 000 001) Type 4 Bus T2 LT 1st generation (up to 07/84, VIN 28-E-025 000) also suitable seat adjusting for: Type 14 (from 08/67, VIN 148 000 001) original spare part, NOS
in stock
Spring of the actuating shaft, fits Type 4 & Bus T2 (08/68 to 07/73)
fits for Type 4 Bus T2 (up to engine no. CA 017 215 & CB 060 604) original spare part, NOS few available
in stock
Spring plate for steel sliding roof cable guiding
fits for: Bus T2 Beetle Type 3 (from VIN 315 170 012) Type 4 Golf MK1+MK2 Jetta MK1+MK2 Polo II Passat I original spare part
Sprühkleber 400ml
vielseitig einsetzbar, auch für Styrol und saugende Materialien sauber und einfach in der Anwendung transparente Verklebung, kein Durchdrücken des Klebstoffs beständig gegen Wasser und Salzwasser Einsatzbereich: Für großflächige...
Viewed