Typ 3 1500 | 1600 - engine
Novelties
No results were found for the filter!
in stock
Rotor arm, from 08/68 and 009
Karmann, Bus, please indicate motor identification number and distributor number (after 08/67 year of construction and chassis identification number requested). original piece
in stock
Rubber grommet for fuel line
up to 9mm line diameter 13mm hole diameter in the bodywork fits for: Type 181 "Thing", 1.5-1.6, 08/69-07/80 Golf Cabrio, 1.5-1.8, 01/79-04/93 Golf / Jetta, 1.1-1.8 (incl. D), 03/74-02/84 Karmann Ghia, 1.2-1.6, 08/55-07/74 Bus T1,...
in stock
Rubber plug for peep hole, fit for type 3/34
fits for: cooling air intake housing Type 3/34 original spare part, NOS
in stock
Rubber valve on the crankcase ventilation pipe, fit for all models
Fits: Type 1 1200cc 1963 until 07/75 13/15/1600cc until 07/72 Type 3 engine until 07/67 + 08/68 and later
in stock
Satz Chrom Moly Stehbolzen Satz 8mm
inkl. Muttern und Scheiben passend für alle Doppelkanal Motoren Typ 1 und bei Bus T3 CT und CZ Motor
in stock
Satz Pleuellagerschalen, 4. Untermaß, für Motoren ab 05/60
+1,00mm nicht für 30PS Motoren außer Bus T1 (ab Motor-Nr. 3 400 000) passend für Typ-1-Motoren ab 34PS Typ 3 Motoren CT & CZ Motoren WBX-Motoren Original-Ersatzteilsatz, NOS Einzelsatz
in stock
Satz Zylinderblechschrauben, für Bus T2& T3, Käfer, Typ 3 1500/1600, & Karmann
3,9x6,5mm, Edelstahl für die Zierleistenmontage bei Bus T2 (bis FIN 231 2300 000)
in stock
Satz-Gummidichtringe, 16 Stück
Ersatz-Gummidichtringe 16 Stück passend für: Teleskopstößelschutzrohre 109 311 336 PA diese dichten das Teleskopstößelschutzrohr ab.
in stock
Schwungscheibe (erleichtert),passend für 18/22kw(25-30 PS), mit 180 mm Durchmesser
Passend für 18/22kw (24,5-30 PS) mit 180 mm Durchmesser Old Speed Racing ist gerade schwer angesagt, also frisieren Sie Ihr treues 24,5 oder 30 PS Aggregat mit einem erleichterten Schwungrad. Ersetzen Sie das alte, abgenutzte...
in stock
Screw plug for oil pressure relief valve, for type 1 engines (from 05/59)
M 18x1,5 fits for Beetle (from 34hp) Karmann Ghia (from 34hp) Bus T1 (from engine no. 3 399 999) Type 3 Type 34 Type 181 Bus T2 Spare part numbers for comparison: 111 115 431 C, 040 115 431 & 043 115 431
in stock
Seal for alternator bracket and breather tower, fits for Type 1 & Type 3
fits for Type 3 gasket vent tower Beetle Karmann Ghia Type 14 and 34 Bus T1 Bus T2 Kübelwagen 181 Fridolin NOS, manufacturer Reinz, Goetze
in stock
Seal for belt pulley, fit for Type 3/34
fits for: Type 3 Type 34 originalsparepart only few available
in stock
Seal for oil pump cover, various types (till 07/67)
fits for: Type 1/14 (up to engine no. 9 800 000, D 0 230 000, E 0 013 650, F 1 225 018, H 0 822 051, L 0 018 099) Type 147 (up to engine no. D 0 230 000) Bus T1 Type 3/34 (up to engine no. K 0 090 195, T 0 445 097) original spare part,...
in stock
Seal for oil pump, fits Type 1 and Type 4 engine (1.6 to 2.0)
fits for Type 1 engines from 37 to 50 hp Type 4 engines Beetle Bus T2 Karman Ghia Type 3 Type 34 Thing 181 Fridolin 147 Type 411 & 412 Stud diameter 8 mm Ø
Seal ring for ignition distributor, fits various models (till 2004)
fits for Beetle Karmann Ghia 14 & 34 Type 147 Type 181 Bus T1, T2 & T3 Type 3 Type 4 K70 industrial engine original spare part
Seal ring for oil cooler, fit for type 3/34 (08/62 to 07/69)
fits for: Type 3 (engine no. 065 746 to K 0 150 000/T 0 690 000) Type 34 (engine no. 065 746 to K 0 150 000/T 0 690 000) originalsparepart
in stock
Sealing paper, 50x25 cm, thickness 0,5 mm
Seal material on cellulosic fiber base More resistant to oil, grease, fuel and air With cold storage long time elastic and oliant Will not be crushed to narrow sealings Easy to cut with knife or scissors Restricted applicable to water!...
Sealing paper, 50x25 cm, thickness 1,0 mm
Seal material on cellulosic fiber base More resistant to oil, grease, fuel and air With cold storage long time elastic and oliant Will not be crushed to narrow sealings Easy to cut with knife or scissors Restricted applicable to water!...
in stock
Sealing ring for main jet screw plug (up to 07/73)
for Solex carburetors 26 VFI, 26 VFIS, 28 PCI, 28 PICT, 28 PICT-1, 30 PICT-1, 32 PHN-1 & 32 PHN-2 11x14.8x1.2 fits for Beetle (up to engine no. D 0 050 314, E 0 014 000, F 1 237 506, H 0 874 199 & L 0 019 336) Karmann Ghia (up to engine...
in stock
Set Connecting Rod Bearing 25-37 kW (34-50 PS) 1,2/1,6 + WBX, 1mm
25-37 kW (34-50 PS) 1,2-1,6 WBX 1mm
in stock
Set Cylinder and pistons, 85,5 x 69 37KW(50 PS) 1585ccm/1600
85,5 x 69 37 kW (50PS) 1585 ccm/1600 suitable for Karmann Ghia Type 14 Karmann Ghia Type 34 Fridolin Type 147 Beetle Bus T1 Bus T2 181 Thing Type 3
Set Cylinder Washer between cylinder and engine housing, fit for 85,5-88mm, Stärke: 0,77
passend für 85,5-88 mm Stärke: 0,77
Set Cylinder Washer between cylinder and engine housing, fit for 85,5-88mm, Stärke: 1,53
passend für 85,5-88mm, Stärke: 1,53
in stock
Set Cylinder Washer between cylinder and motor housing, fit for 85,5-88mm, Stärke: 0,51
passend für 85,5-88mm, Stärke: 0,51
in stock
Set Cylinder Washer, between cylinder and engine housing, fit for 90,5-92, Stärke: 0,30
passend für 90,5 - 92 Stärke: 0,03 inch 0,762mm
in stock
Set Cylinder Washer, between cylinder and engine housing, fit for 90,5-92, Stärke: 0,40
passend für 90,5 - 92 Stärke: 0,04 inch 1,016mm
Set of connecting rod bearing shells, 1st undersize, fits engines from 05/60 onwards
+0,25mm not for 30hp engine except Bus T1 (from engine no. 3 400 000) fits for type 1 engines from 34hp type 3 engines CT & CZ engines WBX engines original spare part, NOS few available Spare part number for comparison: 113 105 707
in stock
Set of connecting rod bearing shells, 3rd undersize, fits engines from 05/60 onwards
+0,75mm not for 30hp engines except Bus T1 (from engine no. 3 400 000) fits for Type 1 engines from 34hp Type 3 engines CT & CZ engines WBX engines original spare part, NOS few available spare part number for comparison: 113 105 719
Set of connecting rod bearing shells, standard, type 1 engines (from 05/60) & WBX
not for 30hp engines except Bus T1 (from engine no. 3 400 000) fits for type 1 engines from 34hp type 3 engines CT & CZ engines WBX engines original spare parts kit, NOS not all available in original packaging few available spare part...
Set of contact breaker points, fits various models (05/60 to 07/74)
fits for the following ignition distributors 111 905 205 T / 111 905 205 AA 113 905 205 M / 113 905 205 T 315 905 205 B original spare part, NOS single item
Set of contact breaker points, fits various models (08/60 to 07/66)
fits for the following ignition distributors 111 905 205 H 113 905 205 A 311 905 205 original spare part, NOS
Viewed