Karmann Ghia Type 34
Novelties
No results were found for the filter!
in stock
in stock
Set of brake pads for ATE 2-pin calipers, fits for Beetle + Type 3 until 07/71
Set of brake pads for ATE 2-pin calipers fits for: Beetle Karmann Ghia Type 14 Karmann Ghia Type 34 Type 3 until 07/71
in stock
Set of brake pads to rivet on, 45 mm, fits for 1302/1303 front + Type 3/34 rear
Set of brake pads for riveting fits for: Beetle 1302/03 Type 3/34 (from chassis no. 221 975) 45 mm
in stock
Set of brake pads, fits for 411/412 + Type 3 from 08/71 (complete VA)
Set of brake pads fits for: 411/412 Type 3, from 08/71 (complete VA)
Set of connecting rod bearing shells, 1st undersize, fits engines from 05/60 onwards
+0,25mm not for 30hp engine except Bus T1 (from engine no. 3 400 000) fits for type 1 engines from 34hp type 3 engines CT & CZ engines WBX engines original spare part, NOS few available Spare part number for comparison: 113 105 707
in stock
Set of connecting rod bearing shells, 3rd undersize, fits engines from 05/60 onwards
+0,75mm not for 30hp engines except Bus T1 (from engine no. 3 400 000) fits for Type 1 engines from 34hp Type 3 engines CT & CZ engines WBX engines original spare part, NOS few available spare part number for comparison: 113 105 719
Set of connecting rod bearing shells, standard, type 1 engines (from 05/60) & WBX
not for 30hp engines except Bus T1 (from engine no. 3 400 000) fits for type 1 engines from 34hp type 3 engines CT & CZ engines WBX engines original spare parts kit, NOS not all available in original packaging few available spare part...
Set of contact breaker points, fits various models (08/60 to 07/66)
fits for the following ignition distributors 111 905 205 H 113 905 205 A 311 905 205 original spare part, NOS
in stock
Set of contact breaker points, fits various models (08/60 to 07/66)
fits for the following ignition distributors 111 905 205 H 113 905 205 A 311 905 205
Set of contact breaker points, fits various models (08/60 to 07/68)
fits for the following ignition distributors 111 905 205 L / 111 905 205 M / 111 905 205 N 113 905 205 K 131 905 205 311 905 205 D / 311 905 205 E / 311 905 205 F / 311 905 205 G 315 905 205 original spare part, NOS
in stock
Set of contact breaker points, fits various models (08/60 to 07/68)
fits for the following ignition distributors 111 905 205 L to 111 905 205 N 113 905 205 K 131 905 205 311 905 205 D to 311 905 205 G 315 905 205
in stock
Set of contact breaker points, fits various models (from 08/67)
one-piece with angled plug fits for the following ignition distributors (air cooled models) 113 905 205 P / AA / AB / AC / AD / AE / AH / A J / AK / AL / AM / AN 211 905 205 R / Q / S 311 905 205 R / L / P / S / AA / T / AB / M / AC / AD...
Set of contact breaker points, fits various models (from 08/67)
one-piece with angled plug fits for the following ignition distributors (air cooled models) 113 905 205 P / AA / AB / AC / AD / AE / AH / A J / AK / AL / AM / AN 211 905 205 R / Q / S 311 905 205 R / L / P / S / AA / T / AB / M / AC / AD...
in stock
Set of contact breaker points, fits various models (from 08/67)
one-piece with angled plug fits for the following ignition distributors (air cooled models) 113 905 205 P / AA / AB / AC / AD / AE / AH / A J / AK / AL / AM / AN 211 905 205 R / Q / S 311 905 205 R / L / P / S / AA / T / AB / M / AC / AD...
in stock
Set of contact breaker points, fits various models (until 07/60)
fits for the following ignition distributors 111 905 205 211 905 205 C / 211 905 205 E / 211 905 205 F
in stock
Set of contact breaker points, fits various models (until 07/64)
fits for the following ignition distributors 111 905 205 C / 111 905 205 F 341 905 205
in stock
Set of contact breaker points, fits various models (until 07/64)
fits for the following ignition distributors 111 905 205 C / 111 905 205 F 341 905 205 original spare part, BOSCH spare part, NOS limited quantity
Set of Crankshaft Bearings-25/37 kW (34/50 PS)
Standard = standard measure/normal measure, 0.25 = 1.Oversize and/or undersize, 0.50 = 2.Oversize and/or undersize, 0.75 = 3.Oversize and/or undersize. Further measures on request.
in stock
Set of Crankshaft Bearings-25/37 kW (34/50 PS)
Standard = standard measure/normal measure, 0.25 = 1.Oversize and/or undersize, 0.50 = 2.Oversize and/or undersize, 0.75 = 3.Oversize and/or undersize. Further measures on request.
in stock
Set of Crankshaft Bearings-25/37 kW (34/50 PS)
Standard = standard measure/normal measure, 0.25 = 1.Oversize and/or undersize, 0.50 = 2.Oversize and/or undersize, 0.75 = 3.Oversize and/or undersize. Further measures on request.
in stock
Set of Crankshaft Bearings, until 18/22 kW (25/30 PS)
Standard = standard measure/normal measure, 0.25 = 1.Oversize and/or undersize, 0.50 = 2.Oversize and/or undersize, 0.75 = 3.Oversize and/or undersize. Further measures on request.
in stock
in stock
Set of cylinder studs, 8mm, with double channel cylinder heads, fit for Type 1
Set of cylinder studs 8mm fit for Type 1 with double channel cylinder heads Made in Germany
in stock
Set of Disc Brake Parts ATE System with 2 retaining pins
Bremsen Kit für ATE 2-Stift Scheibenbremse verbaut an der Vorderachse Set bestehend aus Bremsklötze Anbausatz Montagepaste
in stock
Set of Engle pestles hardened 100 grams
Engle tappets hardened and lightened 28 mm fit for all Engle camshafts in type 1 engines
in stock
in stock
Set of pads, 40 mm, to rivet on, fits for Beetle + Karmann Ghia
Original pads with rivet set fits for: Beetle (not 1302/1303) Karmann Ghia Type 14 front, all from year of construction 58 rear, all from year of construction 68 40mm pads
in stock
in stock
in stock
Set of piston rings 83.5mm (1st oversize), fits Beetle, Type 3 & Bus T1
fits for: Beetle (up to engine no. H 0 823 799 & L 0 018 179) Type 3 (engine no. K 0 000 001 to K 0 078 229) Bus T1 (engine no. H 0 000 001 to H 0 703 230) consisting of 4 x piston ring, top 83.5 mm 4 x piston ring, bottom 83.5 mm 4 x...
Set of piston rings 83.5mm (1st oversize), fits Type 3 (08/65 to 01/67)
fits for: Type 3 (engine no. K 0 000 001 to K 0 078 229) consisting of 4 x upper piston ring 83.5 mm 4 x lower piston ring 83.5 mm 4 x oil wiper rings 83.5 mm 4 x expander spring 83-84 mm original spare part set, NOS only few available
in stock
Set of piston rings 83.5mm (1st oversize), fits Type 3/34 (till 07/65)
fits for: Type 3/34 (up to engine no. 1 100 000) consisting of 8 x piston ring 83.5 mm 4 x oil wiper rings 83.5 mm 4 x expander spring 83-84 mm original spare part set, NOS single item
in stock
Set of piston rings 83.5mm (1st oversize), fits Type 3/34 & Bus T1 (up to 07/65)
fits for: Type 3/34 (up to engine no. 1 100 000) Bus T1 (up to engine no. 1 100 000) consisting of 8 x piston ring 83.5 mm 4 x oil scraper rings with hose spring 83.5 mm original spare part set, NOS only few available
in stock
Set of piston rings 83mm (standard size), fits Type 3/34 & Bus T1 (till 07/65)
fits for: Type 3/34 (up to engine no. 1 100 000) Bus T1 (up to engine no. 1 100 000) consisting of 8 x piston ring 83 mm 4 x oil scraper rings with hose spring 83 mm original spare part set, NOS only few available
in stock
Set of piston rings 84mm (2nd oversize), fits Type 3/34 (till 07/65)
fits for: Type 3/34 (engine no. 255 340 to 1 100 000) consisting of 8 x piston ring 84 mm 4 x oil wiper rings 84 mm 4 x expander spring 83-84 mm original spare part set, NOS only few available
in stock
Set of piston rings 86mm (1. oversize), fits Type 3 (till 01/67) & 34 (till 07/66)
fits for: Type 3 (engine no. T 0 000 001 until Jan. 1967) Type 34 (engine no. T 0 000 001 to T 0 260 000) consisting of: 8 x piston ring 86 mm 4 x oil scraper ring with hose spring 86 mm original spare part set, NOS single item
Set of piston rings, oversize, suitable for Type 3/34 & Bus T1 (up to 07/65)
fits for: Type 3/34 (up to engine no. 1 100 000) Bus T1 (up to engine no. 1 100 000) consisting of 8 x piston ring 84 mm 4 x oil scraper rings with hose spring 84 mm original spare part only few available
in stock
in stock
Set of pistons and cylinders with piston rings and bolts, 83x69, 1493ccm
fit for 1500 engine Manufacturer Kolbenschmidt 83mm bore Stroke 69mm Cylinder head 94 Piston pin 22mm Originalpartnumber for comparison 311 198 063 H
Set of pistons and cylinders, cast, 85.5 x 69 (1600cc)
set consisting of 4 cylinders, upper diameter 94mm, lower diameter 90mm 4 pistons with piston pins and rings engine gasket set pushrod tubes engine sealing compound
in stock
Set of Push Rod Tubes , stainless-steel, fits for 29-37 kW (40-50 PS)
stainless-steel good finish and surface high Quality polished surface set includes 8 Push Rod Tubes fits for all air cooled engines with 29 - 37 kW Made by WERK34
Set of pushrods, fits all Boxer engines
Heads only on one side ready mounted, other sides can be brought to the appropriate length before the heads are mounted.
Set of pushrods, heavy duty, fits all Boxer engines
Heads only on one side ready mounted, other sides can be brought to the appropriate length before the heads are mounted.
in stock
Set of rear axle bearing cap screws
Set consists of 4 pieces, M10x35 Original part number is only used for comparison 311 501 325 fit for Beetle from 57 and Karmann from 57 Type 181 08/69-02/73 Bus T1 to 07/67
in stock
Set of series tappets, fit for all engines with 25 to 37 kW (34 to 50 HP)
Original quality Manufacturer: FEBI Bielstein Set consists of 8 pieces
in stock
Viewed