Bus T2 - Exhaust / exhaust system / heat exchanger
Novelties
No results were found for the filter!
in stock
Mounting kit for heater flap cable, for air-cooled models (11/66 to 07/03)
can also be used on earlier vehicles consisting of: 1x intermediate piece for heater flap cable 1x bolt for intermediate piece 1x bolt for heater flap cable 1x hexagon head screw M 5X10 1x lock washer 4 fits for Beetle (from VIN 116 314...
Mounting set 32mm for exhaust, fits type 1 engines (12/58 to 07/76)
between exhaust and heat exchanger fits for Bus T1 (up to engine no. 7 336 420) Beetle (engine no. 2 720 711 to 3 949 222, 30hp and 7 336 419, 34hp) Karmann Ghia, type 14 (engine no. 2 720 711 to 3 949 222, 30hp and 7 336 419, 34hp)...
Muffler with Tailpipe Stainless Steel 1600cc
Der Auspufftopf hat 2 Ausgänge zum Endrohr, welches einen größeren Durchmesser hat als das Serienendrohr. Dadurch ist dieser Schalldämpfer auch für leistungsgesteigerte Typ 1 Motoren sehr gut geeignet, weil durch die 2 Ausgänge und den...
Outlet connection for left heat exchanger, fits for Type 1 engines from 01/63
with flap diameter 60mm fits for: 30 HP engines (from engine no. 3 949 223) 34 HP engines (from engine no. 7 336 420) 37 to 50 HP engines original spare part, NOS only few available
Outlet connection for right heat exchanger, fits for Type 1 engines (from 01/63)
with flap diameter 60mm fits for: 30 HP engines (from engine no. 3 949 223) 34 HP engines (from engine no. 7 336 420) 37 to 50 HP engines original spare part, NOS only few available
in stock
Radial wheel for auxiliary heater, fits Bus T2 & T3 + LT (from 08/73)
for Eberpächer BA6/DA6 fits for: Bus T2 (from VIN 214 2000 001) Bus T3 LT (engine code letter CP, from VIN 28 - B - 012 327) original spare part, NOS single item
in stock
Relay for auxiliary heating, fits Bus T2 & T3 + LT
for Eberspächer BA6/DA6 fits for: Bus T2 (from VIN 214 2000 001) Bus T3 LT (only engine code CP, from VIN 28 - B - 012 327) original spare part, NOS partly with slight storage traces (dirt)
in stock
Rosette für Zeitschalter der Standheizung, passend für Typ 3, Typ 2, Typ 181 & LT
passend für: Bus T2 Typ 3 (ab Fahrgest.-Nr. 318 000 001) Typ 181 LT (bis 11/80) Original-Ersatzteil, NOS Vergleichsnummer 311 963 111 D nur wenige vorhanden
in stock
Rubber for heater hose between engine and body, from year 08/61
fits for Beetle (from VIN 111 2000 001) Karmann Ghia (from VIN 141 2000 001) Type 147 (from VIN 141 2000 001) Bus T2 (with 1300 & 1600cc engine, from VIN 218 000 001) Type 181 (from VIN 184 2219 789) Is installed between the heat...
in stock
Seal for hot air hose, fits various types (from 08/72)
fits for Beetle (from 08/72, VIN 133 2099 856) Karmann Ghia (from 08/72, FIN 143 2000 001) Bus T2 is installed between heat exchanger and warm air hose 4 pieces are needed per vehicle
in stock
Seal for tailpipe with silencer, fits Type 4 engines
43mm, for 1700ccm engines fits for: Bus T2 (engine code CA & CB) Type 4 (engine code W, Z, EB and from engine no. V 0 049 186 & up to engine no. EA 098 793) original spare part, NOS only few available
in stock
Sealing cone 32mm for exhaust, fits for Type 1 engines up to 07/76
for exhaust/heat exchanger fits for Bus T1 (up to engine no. 7 336 419) Beetle (up to engine no. 3 949 222, 30hp and 7 336 419, 34hp) Karmann Ghia, type 14 (up to engine no. 3 949 222, 30hp and 7 336 419, 34hp) for absorber pipe fits for...
in stock
Sealing cone 43,5mm for tailpipe with damper, fits type 4 engines
fits for Bus T2 (1700ccm) Type 4 (from engine no. V 0 049 186, W/Z/EA/EB 0 000 001) original spare part, NOS only few available
in stock
Set of cylinder head exaust gasket
suitable for Fridolin Type 147 Bus T1 Bus T2 Bus T3 181 Thing Karmann Ghia Type 14 Type 3
in stock
Slider for fresh air duct, door right, used, fits Bus T2 (08/71 to 07/79)
fits for Bus T2 original spare part, used condition few available
in stock
Spring for fresh air and heater lever, fits Bus T2 (08/72 to 07/73)
fits for Bus T2 (up to VIN 212 2300 000) original spare part, NOS few available
in stock
Spring for fresh air and heater lever, fits Bus T2 (until 07/72)
fits for Bus T2 (up to VIN 212 2300 000) original spare part, NOS few available
in stock
Spring for heating air outlet, fits Bus T2 (till 07/72)
fits for Bus T2 (up to VIN 212 2300 000) original spare part, NOS few available
in stock
Spring for various applications (from 03/55)
fits as safety spring of cooling air connecting rod for Beetle (from engine no. 8 796 623, AC 0 008 648, AF 0 129 073, AJ 0 012 375 (A), AJ 0 055 472 (S), AR 0 140 280, AS 0 257 734 & for engine code E, F, H, L & B) Karmann Ghia (from...
Stainless Steel 2-Tip GT Exhaust System, fits for Bus T25 + Bus T2 Bay
Stainless Steel 2-Tip GT Exhaust System fits for: Bus T25, 1979-1984, 2000cc air cooled/1900cc water cooled until 1984 Bus T2 Bay, 1971-1979, 1700cc/1800cc/2000cc
in stock
Tail Pipe, stainless-steel, fit for Bus from 08/71-07/85 with 1,7-2,0 L + WBX
Endrohr aus poliertem Edelstahl passend für Bus von 08/71-07/85 mit 1,7-2,0 L und WBX 1,9-2,1
in stock
Temperature sensor for auxiliary heater, fits Bus T2 & T3 + LT (from 08/73)
for Eberpächer BA6/DA6 fits for: Bus T2 (from VIN 214 2000 001) Bus T3 LT (engine code letter CP, from VIN 28 - B - 012 327) as replacement for 411 963 261 as well, fits for Type 4 (from VIN 411 2000 001) original spare part, NOS few...
in stock
Tension spring for heat exchanger or throttle, fits various models
fits as return spring of the heat flap lever for Beetle (from engine no. D 1 085 397, AB 0 902 207, AC 0 007 903, AF 0 036 736, AR 0 000 001 & AS 0 000 001) Karmann Ghia (from engine no. D 1 085 397, AB 0 902 207, AC 0 007 903, AF 0 036...
in stock
Trim for heater vent, fits Bus T2 (08/69 to 07/72)
fits for Bus T2 (VIN 219 000 001 to 212 2300 000) original spare part, NOS with storage traces few available two needed per vehicle
in stock
Trim for heater vent, left, fits Bus T2 (from 08/72)
fit for Bus T2 (from VIN 213 2000 001) reproduction
in stock
Trim for heater vent, right, fits Bus T2 (from 08/72)
fit for Bus T2 (from VIN 213 2000 001) reproduction
in stock
Verbindungsschlauch der Standheizung, passend für Bus T2 & T3 (ab 08/73)
für EBERSPÄCHER Standheizung BA6 passend für Bus T2 (ab FIN 214 2000 001) Bus T3 Original-Ersatzteil, NOS wenige vorhanden
Warmluftschlauch, Durchmesser ca. 75 mm
Preis pro Meter passend mit Adapter von 100 mm auf 75 mm z.B. für Planar 44D Standheizung
Viewed