Bus T1
Novelties
No results were found for the filter!
in stock
Set of Crankshaft Bearings, fits 25/30hp engines (till 07/65)
standard case dimensions standard Crankshaft dimensions fits for Beetle (up to engine no. 4 050 000) Karmann Ghia (up to engine no. 4 050 000) Typ 147 "Fridolin" (up to engine no. 4 050 000) Bus T1 (up to engine no. 3 399 999)
in stock
Set of Crankshaft Bearings, until 18/22 kW (25/30 PS)
Standard = standard measure/normal measure, 0.25 = 1.Oversize and/or undersize, 0.50 = 2.Oversize and/or undersize, 0.75 = 3.Oversize and/or undersize. Further measures on request.
in stock
Set of cylinder head exaust gasket
suitable for Fridolin Type 147 Bus T1 Bus T2 Bus T3 181 Thing Karmann Ghia Type 14 Type 3
in stock
Set of cylinder studs, 8mm, with double channel cylinder heads, fit for Type 1
Set of cylinder studs 8mm fit for Type 1 with double channel cylinder heads Made in Germany
in stock
Set of dowel pins for flywheel, fits up to 07/65
dowel pins 6mm x 18,3mm fits for 25/30 HP engines spare part numbers for comparison 111 105 277 & 111 105 277 A
in stock
Set of Engle pestles hardened 100 grams
Engle tappets hardened and lightened 28 mm fit for all Engle camshafts in type 1 engines
Set of Hinges for Tail Gate, fits for Bus T1 +Bus T2a
Set of Hinges for Tailgate fits for Bus T1 08/63-07/71 Bus T2a 08/63-07/71
Set of Inspection Parts 25-37kw(34-50HP) after 08/71
Set bestehend aus Zündkerzen mit Kurzgewinde Benzinfilter Schlauchschellen Ölwechsel-Dichtsatz Papier-Luftfilter (nicht passend für Käfer 1600i Mexico Einspritzer)
Set of Lining 8-Piece, grid-grey/grey, 08/63-07/67
Bus T1, Sets of lining refer to busses with loading doors right and partition wall without central passage. Please call us before ordering in case your bus has got one or two sliding doors, flap doors on the left or a central passage.
Set of Lining 8-Piece, grid-platinum/platinum, 08/63-07/67
Bus T1, Sets of lining refer to busses with loading doors right and partition wall without central passage. Please call us before ordering in case your bus has got one or two sliding doors, flap doors on the left or a central passage.
in stock
Set of Lining 8-Piece, phosphor/como-green, 08/63-07/67
Bus T1, Sets of lining refer to busses with loading doors right and partition wall without central passage. Please call us before ordering in case your bus has got one or two sliding doors, flap doors on the left or a central passage.
Set of Lining 8-Piece, silver-beige/basalt-green,03/61-07/6
Bus T1, Sets of lining refer to busses with loading doors right and partition wall without central passage. Please call us before ordering in case your bus has got one or two sliding doors, flap doors on the left or a central passage.
Set of Lining 8-Piece,silver-beige/bastalt-grey,08/63-07/6
Bus T1, Sets of lining refer to busses with loading doors right and partition wall without central passage. Please call us before ordering in case your bus has got one or two sliding doors, flap doors on the left or a central passage.
in stock
Set of piston rings (for all four pistons) with oil control rings, 77mm 2.5 x 2.5 x 4, standard dimensions
fits for: type 1 engines 1200cc (30 and 34 HP) up to engine no. D 0 992 260 dimensions: upper piston ring 2.5mm lower piston ring 2.5mm oil scraper ring 4.0mm
Set of piston rings 83.5mm (1st oversize), fits Beetle, Type 3 & Bus T1
fits for: Beetle (up to engine no. H 0 823 799 & L 0 018 179) Type 3 (engine no. K 0 000 001 to K 0 078 229) Bus T1 (engine no. H 0 000 001 to H 0 703 230) consisting of 4 x piston ring, top 83.5 mm 4 x piston ring, bottom 83.5 mm 4 x...
in stock
Set of piston rings 83.5mm (1st oversize), fits Type 3/34 & Bus T1 (up to 07/65)
fits for: Type 3/34 (up to engine no. 1 100 000) Bus T1 (up to engine no. 1 100 000) consisting of 8 x piston ring 83.5 mm 4 x oil scraper rings with hose spring 83.5 mm original spare part set, NOS only few available
in stock
Set of piston rings 83mm (standard size), fits Type 3/34 & Bus T1 (till 07/65)
fits for: Type 3/34 (up to engine no. 1 100 000) Bus T1 (up to engine no. 1 100 000) consisting of 8 x piston ring 83 mm 4 x oil scraper rings with hose spring 83 mm original spare part set, NOS only few available
Set of piston rings, oversize, suitable for Type 3/34 & Bus T1 (up to 07/65)
fits for: Type 3/34 (up to engine no. 1 100 000) Bus T1 (up to engine no. 1 100 000) consisting of 8 x piston ring 84 mm 4 x oil scraper rings with hose spring 84 mm original spare part only few available
in stock
Set of pistons and cylinders with piston rings and bolts, 83x69, 1493ccm
fit for 1500 engine Manufacturer Kolbenschmidt 83mm bore Stroke 69mm Cylinder head 94 Piston pin 22mm Originalpartnumber for comparison 311 198 063 H
in stock
Set of Push Rod Tubes , stainless-steel, fits for 29-37 kW (40-50 PS)
stainless-steel good finish and surface high Quality polished surface set includes 8 Push Rod Tubes fits for all air cooled engines with 29 - 37 kW Made by WERK34
in stock
Set of push rods, fits 30 & 34 hp engines (till 01/64)
length 268mm follow repair guide M6! fits for Beetle, Karmann Ghia (engine no. 5 000 001 to 8 339 392) industrial engine type 122/2 (up to engine-no.122 -124 090) Bus T1 (engine no. 3 400 000 to 7 816 340) original spare part set, NOS...
Set of pushrods, fits all Boxer engines
Heads only on one side ready mounted, other sides can be brought to the appropriate length before the heads are mounted.
Set of pushrods, heavy duty, fits all Boxer engines
Heads only on one side ready mounted, other sides can be brought to the appropriate length before the heads are mounted.
in stock
Set of rear axle bearing cap screws
Set consists of 4 pieces, M10x35 Original part number is only used for comparison 311 501 325 fit for Beetle from 57 and Karmann from 57 Type 181 08/69-02/73 Bus T1 to 07/67
in stock
Set of rubber mats on wheel arches front, gray, fits for Bus T1
Set of rubber mats on wheel arches in front gray fits for: Bus T1
in stock
Set of Samba Trims -07/63
Trims for Samba-Busses are also available as used parts. Please inquire what is in stock. Trim piping see "seals".
in stock
Set of Samba Trims 08/63-07/67
Trims for Samba-Busses are also available as used parts. Please inquire what is in stock. Trim piping see "seals".
in stock
Set of series tappets, fit for all engines with 25 to 37 kW (34 to 50 HP)
Original quality Manufacturer: FEBI Bielstein Set consists of 8 pieces
in stock
Set of valve guides (4 pieces), suitable for Type 1 engine with 30 PS
suitable for: Beetle Karmann Ghia Bus T1 standard 10,2 mm/7 mm
in stock
Set of valve guides, 1st oversize, fits Type 4 engines & WBX
bronze alloy with high wear resistance and good fatigue and corrosion resistance for exhaust valves inner dimension 8.98mm outer dimension 13.11 mm length 66.5mm
Set of valve springs series, fit for 31 to 37 kW (42 to 50 HP) consisting of 8 pieces
fits for: 1300 to 1600cc although slightly stronger they can also be used for 1200s
in stock
Setb of lifter rod housing seals (16 Pieces), type 1 engine & WBX
fits for Beetle (from engine no. 5 000 001) Karmann Ghia (from engine no. 5 000 001) Type 147 Bus T1 (from engine no. 3 400 000) Bus T2 Bus T3 Typ 3 Typ 34 Typ 181 german quality product
Viewed