181 Thing - Engine
Novelties
No results were found for the filter!
in stock
Shielding plate leftt, fits single channel preheating (from 05/60)
type 1 engines 1200 to 1600ccm with single preheating fits for Beetle (from engine no. 7 336 420) Bus T1 (from engine no. 5 000 001) Karmann Ghia (from engine no. 7 336 420) Type 147 (from engine no. 7 336 420) Bus T2 Type 181 original...
in stock
Shielding plate right, fits single channel preheating (from 05/60)
type 1 engines 1200 to 1600ccm with single preheating fits for Beetle (from engine no. 7 336 420) Bus T1 (from engine no. 5 000 001) Karmann Ghia (from engine no. 7 336 420) Type 147 (from engine no. 7 336 420) Bus T2 Type 181 original...
in stock
Sicherheitsabschaltung Benzinpumpe 12 Volt
Aus Sicherheitsgründen darf bei Motorstillstand die Benzinpumpe nicht fördern. Was bei einer mechanischen Benzinpumpe selbstverständlich ist, wird interessant bei der Nachrüstung auf eine elektrische Benzinpumpe. Hier muss eine...
in stock
Sicherungsscheibe für Schwungrad, passend für Typ 1 Motoren
passend für Motoren ab 25 bis 50 PS Original-Ersatzteil, NOS deutsches Produkt begrenzte Stückzahl außen 42mm Ø innen 29mm Ø Materialstärke 1,35 mm
in stock
Silicone crank seal standard (flywheel side)
suitable for: Bus T1 Engines 1200 (except 25-30HP) Bus T1 Engines 13-1600 Typ3 Bus T3 only CT/CZ engines
Silicone valve cover gasket, fits 1,7-2,0
Silicone gaskets can be used multiple times over cork gaskets.
Silicone valve cover gasket, fits 1.2-1.6 from 01/62 & WBX
Silicone gaskets can be used multiple times over cork gaskets.
Single Carburetor Kit Weber 40 IDF Type 1 engine
Recommended is the central carburetor system(with a carburetor) for 1600-1776 cc type 1, please note that we recommend a maximum of 276 degrees camshaft. Tuning should be done by a specialist company. You should also with a series engine...
in stock
Spacer for flywheel, 0.25mm, for Type 1 & Type 3 engines (from 04/66)
fits for Beetle, Karmann Ghia, Type 147 (from engine no. D 0 076 332, E 0 004 201, F 0 741 385 & engine codes H, L, B, AB, AC, AD, AE, AF, AH, AR, AS & AJ) Bus T1 (from engine no. H 0 140 93 Bus T2 Bus T3 (engine codes CT & CZ) Type 3...
in stock
Spacer for flywheel, 0.30mm, for Type 1 & Type 3 engines (from 04/66)
fits for Beetle, Karmann Ghia, Type 147 (from engine no. D 0 076 332, E 0 004 201, F 0 741 385 & engine codes H, L, B, AB, AC, AD, AE, AF, AH, AR, AS & AJ) Bus T1 (from engine no. H 0 140 93 Bus T2 Bus T3 (engine codes CT & CZ) Type 3...
in stock
Spacer for flywheel, 0.34mm, fits Type 1 & Type 3 engines (from 04/66)
fits for Beetle, Karmann Ghia, Type 147 (from engine no. D 0 076 332, E 0 004 201, F 0 741 385 & engine code H, L, B, AB, AC, AD, AE, AF, AH, AR, AS & AJ) Bus T1 (from engine no. H 0 140 93 Bus T2 Bus T3 (engine codes CT & CZ) Type 3...
in stock
Spacer ring for 123 ignition distributor
The 123ignition ignition distributors have a universal housing, which could be pressed too deep into the crankshaft housing if not installed correctly. This spacer ring is required to create the correct distance and to avoid damage to...
Spark plug 145 with short thread, fits Type 1 & Type 3 engines
manufacturer BERU heat value 145 electrode gap 0,7mm original spare part, NOS few available
in stock
Spark Plug for cylinder heads with Langgewinde, W8CC
fit for Bus 1.7 - 2.0 (air cooled) sowie andere luftgekühlte Fahrzeuge mit Langgewinde im Zylinderkopf
in stock
Spark Plug Holder
Perfect and neat looking holder to carry a spare set of four spark plugs for your vintage VW or Porsche Produced from fully polished billet aluminium and supplied with stainless steel hardware ready to mount in your engine bay. Designed...
Spark plug NGK BP6HS for tuned engines, 4 pieces
Spark plug NGK BP6HS for tuned engines 4 pieces fits for: Type-1 engines until 9.1992 Type-3 engines CT/CZ engines until 1980 (engine nr. 065010) Specifications: Thread size: M14 x 1.25 Thread length: 12.7 mm Wrench size: 21 mm Gap: 0.7...
in stock
Special nut of the cooling fan wheel, fits type 1 engines (from 05/59)
fits for Beetle (from VIN 2 422 426) Karmann Ghia (from VIN 2 422 426) Type 147 Bus T1 (from VIN 469 305) Bus T2 Type 181 "Thing" original spare part, NOS limited quantity did replace as spare part 119 141 & 111 119 14
in stock
Sport Cam Shaft Engle 276° W100
Sport Cam Shaft Engle 276° W100 suitable for Beetle Bus T1 Bus T2 Fridolin Type 147 Karmann Ghia Type 14 Karmann Ghia Type 34 Type 3 181 Thing
Sport Cam Shaft Engle 284° W110
Sport Cam Shaft Engle 284° W110 suitable for Beetle Type 3 Karmann Ghia Type 14 Karmann Ghia Type 34 Bus T1 Bus T2 181 Thing Fridolin Type 147
Sport Cam Shaft Engle 301° W125
für Dragrace Ventilhub mit Kipphebel 1,1/1:11,679 Gesamtsteuerzeit 301 Spreizu
NEW
in stock
Sports air filter, OKRASA-style
Sports air filter OKRASA-style this sports air filter is suitable for carburetors with 52mm connector diameter Height : 60mm Diameter: 110mm this sports air filter is not certified according to traffic regulations! Replacement air filter...
in stock
Spring clamp for rocker arm shaft, fits type 1 engines & WBX (from 05/59)
fits for Beetle, Karmann Ghia & Type 147 (from 34hp) Bus T1 (from engine no. 3 400 000) Type 3 & Type 34 Type 181 Brasil T1 Bus T2 Bus T3 (CT, CZ & WBX) original spare part, NOS limited quantity
in stock
Spring clip for rocker arm shaft, fits Type 1 engines & WBX (05/59 onwards)
fits for Beetle, Karmann Ghia & Type 147 (from 34hp) Bus T1 (from engine no. 3 400 000) Type 3 & Type 34 Type 181 Brasil T1 Bus T2 Bus T3 (CT, CZ & WBX)
in stock
Spring for one-piece drive lever of fuel pump, fits 30 to 50hp engines
length 33mm fits for Beetle (from engine no. 5 000 001) Karmann Ghia (from engine no. 5 000 001) Type 147 (from engine no. 5 000 001) Bus T1 (from engine no. 3 400 000) Typ 3 (from engine no. 13 113) Typ 34 (from engine no. 13 113) Typ...
in stock
Spring for various applications (from 03/55)
fits as safety spring of cooling air connecting rod for Beetle (from engine no. 8 796 623, AC 0 008 648, AF 0 129 073, AJ 0 012 375 (A), AJ 0 055 472 (S), AR 0 140 280, AS 0 257 734 & for engine code E, F, H, L & B) Karmann Ghia (from...
in stock
Stiftschraube für Kipphebelachse, passend für verschiedene Modelle
teilweise passend ab 34 PS für Käfer Karmann Ghia Typ 34 Bus T1 Bus T2 Typ 3 Typ 34 Kübelwagen Typ 181 Fridolin Typ 147 Bus T3 Maße der Stiftschraube M8/M10,gesamt 62 mm lang
in stock
Stiftschraube Übergröße für Kipphebelwellenachse, passend 25-30,9kw (34-42 PS)
passend bis Motor 672 697
in stock
Stock connection rods (4 pieces)
Scope of delivery 4 pieces Fit for all type 1 engines 13-1600 and for Bus T3 CT / CZ engines
in stock
Stock cylinder head complete
fit for Beetle, Bus and Type 3 1600 cc with dual port carburetor and injection engines Bore: 85.5 mm Combustion chamber: 53 cc Valves: 35.5 x 32 mm Stainless Steel Spark plug size: 14 mm Even with complete cylinder heads, it is always...
in stock
Stock oil pump 21mm gears/6mm studs
original Number is for comparsion only 111 115 107/311 115 107/111 115 111 A
Viewed